getac gamber johnson vehicle holder

Gamber Johnson držiak do vozidla, vŕtanie: VESA 75, vhodný pre: A140

Objav podobné ako Getac Gamber Johnson vehicle holder

Gamber-Johnson držiak do vozidla, VESA: 75 x 75, vhodný pre: K120 (Tablet)

Objav podobné ako Getac Gamber-Johnson vehicle holder

Gamber Johnson držiak do vozidla, vhodný pre: V110

Objav podobné ako Getac Gamber Johnson vehicle holder

Gamber Johnson držiak do vozidla, vhodný pre: ZX70

Objav podobné ako Getac Gamber Johnson vehicle holder

Gamber Johnson držiak do vozidla, vhodný pre: ZX70

Objav podobné ako Getac Gamber Johnson vehicle holder

UX10 - Gamber Johnson, 7160-1815-00, Vozidlová kolíska (napr. vehicle adaptér)

Objav podobné ako Getac Gamber Johnson Vehicle Cradle

Gamber Johnson dokovacia stanica do vozidla, Tri Pass-through, 3x USB 2.0, 1x USB 3.0, 1x RS232, 1x HDMI, 1x VGA, 1x ethernet, objednať samostatne: adaptér do vozidla, vhodné pre: A140

Objav podobné ako Getac Gamber Johnson vehicle dock

Gamber-Johnson nabíjacia stanica do vozidla, 3x USB 2.0, 3x USB 3.0, 1x HDMI, 1x VGA, 2x Ethernet, 1x RS232, VESA: 75 x 75, objednať samostatne: napájací zdroj, vhodné pre: K120 (Tablet)

Objav podobné ako Getac Gamber-Johnson vehicle charging station

Gamber-Johnson nabíjacia stanica do vozidla, 3x USB 2.0, 3x USB 3.0, 1x HDMI, 1x VGA, 2x Ethernet, 1x RS232, VESA: 75 x 75, vrátane.: napájací zdroj, vhodný pre: K120 (Tablet)

Objav podobné ako Getac Gamber-Johnson vehicle charging station

Gamber-Johnson nabíjacia stanica do vozidla, 3x USB 2.0, 3x USB 3.0, 1x HDMI, 1x VGA, 2x Ethernet, 1x RS232, VESA: 75 x 75, Tri-Pass Through, vrátane.: napájací zdroj, vhodný pre: K120 (Tablet)

Objav podobné ako Getac Gamber-Johnson vehicle charging station, Tri-Pass Through

Gamber Johnson držiak do vozidla, pasívny, vhodný pre: T800

Objav podobné ako Getac Gamber Johnson vehicle mount

Gamber Johnson vozidlová dokovacia stanica, 3x USB 2.0, 1x USB 3.0, 1x VGA, 1x HDMI, 1x ethernet, 1x RS-232, 2x audio, 1x napájací konektor, objednáva sa samostatne: napájací zdroj, vhodné pre: V110

Objav podobné ako Getac Gamber Johnson vehicle dock

Gamber Johnson vozidlová dokovacia stanica, 3x USB 2.0, 1x USB 3.0, 1x VGA, 1x HDMI, 1x ethernet, 1x RS-232, 2x audio, 1x napájací konektor, vrátane.: Tri Pass-through, objednať samostatne: napájanie, vhodné pre: V110

Objav podobné ako Getac Gamber Johnson vehicle dock, Tri Pass-through

Gamber Johnson dokovacia stanica do vozidla, Triple Pass-Through, objednáva sa samostatne: adaptér do vozidla, vhodné pre: V110

Objav podobné ako Getac Gamber Johnson vehicle dock

Gamber Johnson vozidlová kolíska, vŕtanie, VESA 75, objednáva sa samostatne: montáž do vozidla, vhodné pre: ZX10

Objav podobné ako Getac Gamber Johnson vehicle cradle

Gamber Johnson vozidlová dokovacia stanica, 3x USB 2.0, 1x USB 3.0, 1x RS232, 1x HDMI, 1x VGA, 1x ethernet, objednať samostatne: adaptér do vozidla, vhodné pre: A140

Objav podobné ako Getac Gamber Johnson vehicle dock

Gamber Johnson vehicle charging-/communication station, interfaces: 2x USB-A, drilling: VESA 75 and AMPS, order separately: vehicle adapter, vehicle mounting, fits for: ET40/45 (10 with rugged boot)

Objav podobné ako Zebra 3PTY-GJ-7160-1807-00 Gamber Johnson vehicle charging-/communication station, USB

Gamber Johnson Nástenný držiak/adaptér, VESA 75/100, AMPS

Objav podobné ako Getac Gamber Johnson Universal Wall Mount/Adapter

Gamber Johnson nabíjacia-/komunikačná stanica, 3x USB 2.0, 1x USB 3.0, 1x HDMI, 1x VGA, 1x Ethernet, 2x RS232, 1x napájaný RS232, 1x Audio, Pass-Through, vŕtanie: VESA 75, objednať samostatne: napájanie do vozidla, držiak do vozidla, vhodné pre: F110G6

Objav podobné ako Getac Gamber Johnson charging-/communication station

Gamber Johnson nabíjacia-/komunikačná stanica, 3x USB 2.0, 1x USB 3.0, 1x HDMI, 1x VGA, 1x Ethernet, 2x RS232, 1x napájaný RS232, 1x Audio, vŕtanie: VESA 75, objednať samostatne: napájanie do vozidla, držiak do vozidla, vhodné pre: F110G6

Objav podobné ako Getac Gamber Johnson charging-/communication station

Getac Brodit držiak do vozidla, vhodný pre: T800

Objav podobné ako Getac Brodit vehicle holder

Zebra MNT-MPV-VHD21-01 vehicle holder

Objav podobné ako Zebra MNT-MPV-VHD21-01 vehicle holder

Zebra CRD-EC5X-VCH1-01, vehicle holder

Objav podobné ako Zebra CRD-EC5X-VCH1-01, vehicle holder

Zebra CRD-TC5NG-NCCD-01, vehicle holder

Objav podobné ako Zebra CRD-TC5NG-NCCD-01, vehicle holder

Predĺžená záruka, 2 roky, vhodná pre: Gamber Johnson K120 Tablet Dock

Objav podobné ako Getac extended warranty

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, WEEE RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDKLU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDKLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX10

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2KLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2U: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PDKLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4U:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with Keys Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5KLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac 4-point hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Buchse Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PKLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC Power Supply

This RAM Mounts Form-Fit holder is suitable for the Getac ZX70 rugged tablet.The cut-outs on the buttons and ports allow you to continue using them without any problems.The RAM Vent-Temp can utilize the vehicle s air vents to direct hot or cold air to the Getac ZX70.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-GE3FU:Compatible with the Getac tablet accessoiresEasy insertion and removalStylus-Pen holderAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-TempAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-GE3FU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Getac ZX70

This RAM Mounts Form-Fit holder is suitable for the Getac ZX70 rugged tablet.The cut-outs on the buttons and ports allow you to continue using them without any problems.The RAM NFC Extender can be used to expand the device s internal NFC reader. The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-GE3NU:Easy insertion and removalStylus-Pen holderAdditional mounting plate for attaching additional devices or accessoriesPrepared for the RAM NFC ExtenderAdditional information: This holder version will not support the Getac Rotating Hand Strap Kickstand accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE3NU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Getac ZX70

Držiak na mobil – do auta, mechanický, uchytenie na palubnú dosku, možnosť nastavenia polohy Potrebujete pri riadení sledovať navigáciu, nabíjať telefón alebo telefonovať cez handsfree? Vhodným riešením pre vás môže byť držiak na mobil Baseus. Možno ho pripevniť na palubnú dosku. K obľúbeným funkciám patrí možnosť úpravy polohy držiaka. Stojan na mobil je pripravený na mechanické upevnenie telefónu. Držiak mobilu do auta vám spríjemní cestovanie. Hlavné prednosti držiaka na mobil Baseus Horizontal Screen Gravity Vehicle-mounted Holder Black Vďaka držiaku na mobil Baseus budete mať telefón stále poruke Stojan na mobil sa nastavuje na palubnú dosku Výrobca nezabudol ani na možnosť úpravy polohy telefónu Telefón nasadíte na držiak mechanicky Držiak telefónu Baseus je nachystaný do auta

Objav podobné ako Baseus Horizontal Screen Gravity Vehicle-mounted Holder Black (SUYL-HP01)

Getac Lind napájanie do vozidla, 12-16 VDC, zapaľovač cigariet

Objav podobné ako Getac Lind vehicle power supply, 12-16 VDC

Havis Vehicle Dock, Tri Pass-through, vhodné pre: A140

Objav podobné ako Getac Havis Vehicle Dock, Tri Pass-through

Getac Lind napájanie do vozidla, 12-32 VDC, zapaľovač cigariet

Objav podobné ako Getac Lind vehicle power supply, 12-32 VDC

Havis vehicle dock, 3x USB 2.0, 3x USB 3.0, 1x VGA, 1x HDMI, 2x Ethernet, 1x RS-232, 1x napájací konektor, objednáva sa samostatne: adaptér do vozidla, vhodné pre: K120

Objav podobné ako Getac Havis vehicle dock

Havis vehicle dock, Tri-Pass Through, 3x USB 2.0, 3x USB 3.0, 1x VGA, 1x HDMI, 2x Ethernet, 1x RS-232, 1x napájací konektor, objednáva sa samostatne: adaptér do vozidla, vhodné pre: K120

Objav podobné ako Getac Havis vehicle dock, Tri-Pass Through

Havis vehicle dock, 1x USB 2.0, 3x USB 3.0, 1x VGA, 1x HDMI, 1x ethernet, 2x RS-232, 2x audio, 1x napájací konektor, objednáva sa samostatne: napájací zdroj, vhodné pre: V110

Objav podobné ako Getac Havis vehicle dock

Vehicle Dock, PMT, AS7.G600.100-PS, obsahuje 230W vozidlový adaptér s holým vodičem, vhodný pro: X600

Objav podobné ako Getac Vehicle Dock

Passive Holder, VESA 75/100, AMPS, compatible with or without handstrap, for: F110G6, F110G7

Objav podobné ako Getac Holder Passive

Passive Holder, VESA 75/100, AMPS, compatible with or without handstrap, lockable, 2 Keys, for: F110G6, F110G7

Objav podobné ako Getac lockable Holder Passive

Passive Holder, VESA 75/100, AMPS, compatible with or without handstrap, with shutter, for: F110G6, F110G7

Objav podobné ako Getac Holder with shutter Passive

Johnson's pre novorodencov Obsah Johnson's umývací gél: 500ml Charakteristika Johnson's umývací gél: Hypoalergénny, s vyrovnaným pH. Ľahko sa oplachuje a nezanecháva stopy na pokožke. S obsahom pravej bavlny. Umýva a chráni citlivú pokožku pred vysušovaním od 1. dňa života. Použitie Vytvorte bohatú zamatovú penu a opláchnite. Pre ešte lepší výsledok následne použite JOHNSON'S Cottontouch mlieko na telo a tvár. Upozornenie: Uchovávajte mimo dosahu detí. Len na vonkajšie použitie. Príbalový leták Johnson's pre novorodencov

Objav podobné ako Johnson's Cottontouch kúpeľ a umývací gél 2v1 500ml

Johnson s® Bedtime, 200 ml, Detská telová starostlivosť pre deti, Neoddeliteľnou súčasťou večerného rituálu, ktorý vášmu najmenšiemu pomôže zaspať, je olej pre dobrý spánok Johnson s® Bedtime. Zatiaľ čo kvetinová vôňa dieťatko príjemne upokojí, rastlinný glycerín hydratuje a stará sa o detskú pokožku počas kúpeľa. Vlastnosti: upokojuje dieťatko a pomáha mu zaspať šetrne čistí pokožku celého tela a stará sa o ňu zanecháva ju hydratovanú s relaxačnou vôňou kvetín starostlivosť navrhnutá pre jemnú detskú pokožku testovaný pediatrami, lekármi a dobrovoľníkmi po celom svete Zloženie: NaturalCalm™ – zmes kvetinových vôní s upokojujúcimi účinkami rastlinný glycerín – hydratuje pokožku 94 % zložiek prírodného pôvodu Ako aplikovať: Olej pre dobrý spánok Johnson s® Bedtime pridajte do teplého kúpeľa. Na detskú vaničku stačí jedno plné viečko, do bežnej vane môžete pridať až tri. Notino tip: Olej je súčasťou trojkrokovej rutiny Johnson s Bedtime®, ktorá okrem teplého kúpeľa zahŕňa jemnú masáž telovým mliekom a pokoj na spánok.

Objav podobné ako Johnson