i tec mysafe external case for 2 sata m2 camysafedualm2

Externý box – rozhranie USB 3.1 Gen 1, konektor USB-C Tento elegantný externý box pre dva M.2 SSD disky (B-key) je kompatibilný s veľkosťou 2 230, 2 242, 2 260, 2 280, pomocou neho sa pripojíte k svojmu notebooku, počítaču, TV či inému multimediálnemu zariadeniu. Box je možné použiť aj k presunu dát z poškodeného notebooku. Pripojenie cez USB-C alebo USB 3.0 ponúka rýchly a jednoduchý prenos dát. Moderný dizajn, malé rozmery a nízka hmotnosť činia i-tec box atraktívnym doplnkom. Box je kompatibilný s konektorom Thunderbolt 3.Kľúčové vlastnosti boxu pre SSD I-TEC MYSAFE External CaseRozhranie USB-C a USB 3.0 pre vysokorýchlostný prenos dátKompatibilný s diskami M.2Napájanie 5 V, 900 mAFunkcia Plug & PlayLED indikácia pre prehľad o stave funkcie diskuMiesto v boxe pre dva disky M.2 SSD

Objav podobné ako I-TEC MySafe External Case for 2× SATA M2 (CAMYSAFEDUALM2)

Sada na holenie Zew for men zahŕňa holiaci strojček na žiletky, štetku, misku, stojan a mydlo. Ide o kompletnú zostavu pre tradičný spôsob holenia. Príslušenstvo je navrhnuté pre pohodlné a efektívne používanie.

• Kompletná sada obsahuje všetko potrebné pre tradičné holenie.
• Štýlový dizajn so stojanom na elegantné uskladnenie.
• Kvalitné príslušenstvo pre pohodlný a efektívny zážitok z holenia.

Objav podobné ako Zew for men sada na holenie

Sada Zew for men obsahuje holiaci strojček Remington RX5 Ultimate Series a balzam po holení. Strojček je určený na holenie hlavy, zatiaľ čo balzam upokojuje a hydratuje pokožku. Ide o kompletnú sadu pre údržbu plešiny.

• Špičkový holiaci strojček Remington RX5 Ultimate Series
• Balzam po holení upokojuje a hydratuje pokožku
• Kompletná sada pre starostlivosť o plešinu

Objav podobné ako Zew for men Remington RX5 Ultimate sada na holenie hlavy

Ravak Freedom Wall II Tec pravá orientácia
vaňa Freedom O Tec ľavá pravá orientácia
kompletná sada na holenie Zew for men
nepripájajúca sa forma na pečenie
akrylátová vaňa Ravak Freedom Corner II Tec
signalizátory záberu s technológiou D-Tec
hlásič s D-Tec Plus systémom
Hansgrohe drez s dvojitou umývadlovou časťou
vstavaná chladnička s mraziacou časťou Siemens
závesná skrinka s krytou hornou časťou
drez s dvojitou umývadlovou časťou
nastaviteľný čas splachovania pisoára
Polysan Cascata voľne stojaca vaňa
šiltovka pre truckerov so sieťovanou zadnou časťou
šiltovka so zosilnenou prednou časťou
trimmer Gamma Piu s odnímateľnou hornou časťou

The RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is the ideal solution for the Apple iPad Air 11 (M2 & M3) – designed for demanding environments where reliability and versatility are essential. This slim yet durable case offers reliable protection against daily wear and tear while enabling flexible connectivity with the GDS Uni-Conn docking platform. Thanks to its smart dual-connectivity design, the case provides two connection options: Rear pogo pads allow for quick and cable-free docking, while an additional D-Shape connector at the bottom offers another interface for power and data – depending on the docking solution available. An extra USB-C port at the bottom also allows the device to be charged without a dock. Its thoughtful design ensures that all tablet functions remain fully accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M2-TCDB: Only compatible with GDS Uni-Conn Pogo pads at the bottom & back Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External ... Unknown localization key: "more"

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Air 11 (M2 & M3) - GDS-Technology - Rear Pogo-Pads & D-Shape - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Air 11 (M2 & M3) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M2-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP45-M2-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Air 11 (M2 & M3) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

Externý box – na 2,5" disky, max. výška disku 9,5 mm, rozhranie USB 3.1 Gen 2, konektor USB-C, 1 voľná pozícia Potrebujete zálohovať dáta alebo ich presunúť z poškodeného notebooku na iný počítač? Externý rámik vám umožní pripojiť 2,5" SATA disky s ľubovoľnou kapacitou k vášmu PC, notebooku alebo televízoru. Prenos dát rýchlosťou až 10 Gbps obstará USB-C 3.1 Gen 2, pričom I-TEC MySafe je kompatibilný aj s rozhraním Thunderbolt 3. Obsluhu rámčeka uľahčuje okamžitá inštalácia ovládačov po prvom pripojení k PC vďaka funkcii Plug & Play alebo možnosť pripojenia disku k počítaču cez samostatný adaptér. Súčasťou balenia je okrem rámčeka I-TEC MySafe tiež odolný plastový box; ten využijete k bezpečnému prenášaniu svojho disku nielen na cestách. Kľúčové vlastnosti I-TEC MySafeExterný rámček pre 2,5" SATA HDD alebo SSD s výškou max. 9,5 mmIdeálny na zálohovanie alebo presun dátVysokorýchlostný prenos 10 Gbps vďaka rozhraniu...

Objav podobné ako I-TEC MySafe USB-C (C31MYSAFEU313)

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Air 11 (M2 & M3) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M2-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP45-M2-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Air 11 (M2 & M3) - GDS-Technology - External USB-C Connector

Externý box – na 2,5" disky, max. výška disku 9,5 mm, rozhranie eSATA a USB 3.1 Gen 1, konektor USB-A a eSATA, 1 voľná pozícia I-TEC MYSAFE Easy je odolné puzdro pre 2,5 "SATA harddisk alebo SSD úložisko s výškou do 9,5 mm. Jednoducho do neho vložte disk, pripojte ho k špeciálnemu adaptéru, a ten potom s pomocou USB kábla do notebooku, stolného počítača alebo televízie.I-TEC MySafe Easy je odolné puzdro pre 2,5" SATA harddisk alebo SSD úložisko s výškou do 9,5 mm. Jednoducho doň vložte disk, pripojte ho k špeciálnemu adaptéru, a ten potom s pomocou USB kábla do notebooku, stolného počítača alebo televízora. Zvukový signál oznamujúci neúspešné pripojenie k PC nezačujete; box totiž disponuje osvedčenou technológiou Plug & Play, ktorá sľubuje okamžité používanie bez nutnej inštalácie ovládačov. Vysokorýchlostný prenos dát (5 GB/s) obstará port USB 3.0. Kľúčové vlastnostiPlug & Play – okamžitý prístup k dátamVysoká odolnosť –...

Objav podobné ako I-TEC MySafe Easy USB 3.0 biely (MYSAFEU314)

Externý box – na 2,5" disky, max. výška disku 9,5 mm, rozhranie eSATA a USB 3.0, konektor USB-A a eSATA, 1 voľná pozícia I-TEC MYSAFE Easy je odolné puzdro pre 2,5 "SATA harddisk alebo SSD úložisko s výškou do 9,5 mm. Jednoducho do neho vložte disk, pripojte ho k špeciálnemu adaptéru, a ten potom s pomocou USB kábla do notebooku, stolného počítača alebo televízie.I-TEC MYSAFE Easy je odolné puzdro pre 2,5" SATA harddisk alebo SSD úložisko s výškou do 9,5 mm. Jednoducho do neho vložte disk, pripojte ho k špeciálnemu adaptéru, a ten potom s pomocou USB kábla do notebooku, stolného počítača alebo televízie. Zvukový signál oznamujúci neúspešné pripojenie k PC nezačujete; box totiž disponuje osvedčenou technológiou Plug & Play, ktorá sľubuje okamžité používanie bez nutnej inštalácie ovládačov. Vysokorýchlostný prenos dát (5 GB/s) potom obstaráva port USB 3.0. Kľúčové vlastnostiPlug & Play - okamžitý prístup k dátamVysoká odolnosť - pevná plastová...

Objav podobné ako I-TEC MYSAFE Easy USB 3.0 sivý (MYSAFEU313)

Externý box – na 2,5" disky, max. výška disku 9,5 mm, rozhranie USB 3.1 Gen 1, konektor USB-A, 1 voľná pozícia I-TEC MYSAFE AluBasic je odolné puzdro pre 2,5 "SATA harddisk alebo SSD úložisko s výškou do 9,5 mm. Jednoducho do neho vložte disk, pripojte ho k špeciálnemu modulu, a ten potom s pomocou USB kábla do ktoréhokoľvek notebooku alebo stolového počítača. I-TEC MYSAFE AluBasic je odolné puzdro pre 2,5 "SATA harddisk alebo SSD úložisko s výškou do 9,5 mm. Jednoducho do neho vložte disk, pripojte ho k špeciálnemu modulu, a ten potom s pomocou USB kábla do ktoréhokoľvek notebooku alebo stolového počítača. Zvukový signál oznamujúci neúspešné pripojenie k PC nebudete počuť; box totiž disponuje osvedčenou technológiou Plug & Play, ktorá sľubuje okamžité používanie bez nutnej inštalácie ovládačov. Vysokorýchlostný prenos dát (5 GB/s) potom obstaráva port USB 3.0.Kľúčové vlastnostiPlug & Play - okamžitý prístup k dátamVysoká odolnosť - pevná...

Objav podobné ako I-TEC MYSAFE AluBasic Advance USB 3.0 (MYSAFEU312)

The RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is the ideal solution for the Apple iPad Pro 11 (M4) – designed for demanding environments where reliability and versatility are essential. This slim yet durable case offers reliable protection against daily wear and tear while enabling flexible connectivity with the GDS Uni-Conn docking platform. Thanks to its smart dual-connectivity design, the case provides two connection options: Rear pogo pads allow for quick and cable-free docking, while an additional D-Shape connector at the bottom offers another interface for power and data – depending on the docking solution available. An extra USB-C port at the bottom also allows the device to be charged without a dock. Its thoughtful design ensures that all tablet functions remain fully accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M4-TCDB: Only compatible with GDS Uni-Conn Pogo pads at the bottom & back Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port ... Unknown localization key: "more"

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 11 (M4) - GDS-Technology - Rear Pogo-Pads & D-Shape - External USB-C Connector

This RAM Mounts GDS IntelliSkin Hard Case protective sleeve is designed for the Samsung Galaxy Tab Active3 & Active5 and offers reliable protection combined with convenient charging functionality. The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use. This IntelliSkin also features an external USB-C port, so that your device can be plugged in, even when a GDS Dock is not available. Thanks to its thoughtful design, all tablet functions remain fully accessible: the camera, buttons, and ports can still be used without restriction. The IntelliSkin case is compatible with a wide range of GDS mounting systems and docking stations, making it ideal for professional use – whether in vehicles, at the workplace, or on the move. Product features RAM Mounts RAM-GDS-SKIN-SAM89-HC: Compatible with GDS Docks Holder for Stylus Pen Continued access to camera and buttons Charging function Easy insertion and removal Input Connector: USB-C 2.0 Transfer Speed: Up to USB 3.1 @ 5Gbps (via D-Shape Contacts*) Up to USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer ... Unknown localization key: "more"

Objav podobné ako RAM Mounts IntellìSkin Hard Case for Samsung Galaxy Tab Active3 & Active5 - External USB-C Port - GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad mini (A17 Pro & mini 6) with rear pogo pads - designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP36-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP36-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad mini 6 & mini (A17 Pro) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 12.9 (3.-5. Gen.) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP37-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP37-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 12.9 (3.-5. Gen.) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad 10 & 11 Gen. (A16) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP40-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP40-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad 10 & 11 Gen. (A16) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 11 (M4) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M4-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP45-M4-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 11 (M4) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad mini (A17 Pro & mini 6) - designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible - including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP36-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP36-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad mini 6 & mini (A17 Pro) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 12.9 (3.-5. Gen.) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP37-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP37-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 12.9 (3.-5. Gen.) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad 10 & 11 Gen. (A16) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP40-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP40-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad 10 & 11 Gen. (A16) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 11 (M4) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M4-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP45-M4-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 11 (M4) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve is designed for the Samsung Galaxy Tab A9+ and offers reliable protection combined with convenient charging functionality. The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use. This IntelliSkin also features an external USB-C port, so that your device can be plugged in, even when a GDS Dock is not available. Thanks to its thoughtful design, all tablet functions remain fully accessible: the camera, buttons, and ports can still be used without restriction. The IntelliSkin case is compatible with a wide range of GDS mounting systems and docking stations, making it ideal for professional use – whether in vehicles, at the workplace, or on the move. GDS Uni-Conn Adapter (RAM-GDS-U1U) needed to enable GDS Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM88-TCD: Compatible with GDS and Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: Up to USB 3.1 @ 5Gbps (via D-Shape Contacts*) Up to USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual ... Unknown localization key: "more"

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab A9+ - External USB-C Port - GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve is designed for the Samsung Galaxy Tab A9+ and offers reliable protection combined with convenient charging functionality. The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use. This IntelliSkin also features an external USB-C port, so that your device can be plugged in, even when a GDS Dock is not available. Thanks to its thoughtful design, all tablet functions remain fully accessible: the camera, buttons, and ports can still be used without restriction. The IntelliSkin case is compatible with a wide range of GDS mounting systems and docking stations, making it ideal for professional use – whether in vehicles, at the workplace, or on the move. GDS Uni-Conn Adapter (RAM-GDS-U1U) needed to enable GDS Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM88-TCD-GRY: Compatible with GDS and Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: Up to USB 3.1 @ 5Gbps (via D-Shape Contacts*), Up to USB 2.0 @ 480Mbps (via External USB-C Port) Colour - light gray Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin ... Unknown localization key: "more"

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab A9+ - GDS-Technology, External USB-C Port, light gray

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve is designed for the Samsung Galaxy Tab Active3 & Active5 and offers reliable protection combined with convenient charging functionality. The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use. This IntelliSkin also features an external USB-C port, so that your device can be plugged in, even when a GDS Dock is not available. Thanks to its thoughtful design, all tablet functions remain fully accessible: the camera, buttons, and ports can still be used without restriction. The IntelliSkin case is compatible with a wide range of GDS mounting systems and docking stations, making it ideal for professional use – whether in vehicles, at the workplace, or on the move. GDS Uni-Conn Adapter (RAM-GDS-U1U) needed to enable GDS Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM93-TCD: Compatible with GDS and Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: Up to USB 3.1 @ 5Gbps (via D-Shape Contacts*) Up to USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab Active3 & Active5 - External USB-C Port - GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve is designed for the Samsung Galaxy Tab S9 FE+, S9+ & S10+ and offers reliable protection combined with convenient charging functionality. The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use. This IntelliSkin also features an external USB-C port, so that your device can be plugged in, even when a GDS Dock is not available. Thanks to its thoughtful design, all tablet functions remain fully accessible: the camera, buttons, and ports can still be used without restriction. The IntelliSkin case is compatible with a wide range of GDS mounting systems and docking stations, making it ideal for professional use – whether in vehicles, at the workplace, or on the move. GDS Uni-Conn Adapter (RAM-GDS-U1U) needed to enable GDS Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM96-TCD: Compatible with GDS and Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: up to USB 3.1 @ 5Gbps (via D-Shape Contacts*), up to USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin ... Unknown localization key: "more"

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab S9 FE+/S9+/S10+ - External USB-C Port, GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads is designed for the Samsung Galaxy Tab A9+ and and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab A9+ is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM88-TCB: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM88-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab A9+ - Rear Pogo-Pads - External USB-C - GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab A9+ and and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab A9+ is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM88-TCB-GRY: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Colour - light gray Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM88-TCB-GRY is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab A9+ - GDS-Technology, Rear Pogo-Pads, External USB-C, light gray

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab Active3 & Active5 and and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab Active3 & Active5 is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM93-TCB: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM93-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab Active3 & Active5 - Rear Pogo-Pads - External USB-C - GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab Active3 & Active5 and and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab Active3 & Active5 is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM93-TCB-GRY: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Colour - light gray Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM93-TCB-GRY is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab Active3 & Active5 - GDS-Technology, Rear Pogo-Pads, External USB-C, light gray

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab S9 FE+, S9+ & S10+ and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab S9 FE+, S9+ & S10+ is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM96-TCB: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM96-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab S9 FE+/S9+/S10+ - Rear Pogo-Pads, External USB-C, GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab S9 FE+, S9+ & S10+ and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab S9 FE+, S9+ & S10+ is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM96-TCB-GRY: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Colour - light gray Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM96-TCB-GRY is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab S9 FE+/S9+/S10+ - Rear Pogo-Pads, External USB-C, GDS-Technology, light gray

The RAM® Safe-Case™ for iPad Pro 13 (M4), Air 13 (M2 & M3), & Pro 12.9 Gray (RAM-TE-AP47-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the 13" iPad, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Apple iPad Pro 13 (M4), Air 13 (M2 & M3), & Pro 12.9 Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Case™ for iPad Pro 13 (M4), Air 13 (M2 & M3), & Pro 12.9 - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for iPad Pro 13 (M4), Air 13 (M2 & M3), & Pro 12.9 (RAM-TE-AP47) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the 13" iPads features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Apple iPad Pro 13 (M4), Air 13 (M2 & M3), & Pro 12.9 Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 9.7", Overall Width 6.62", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Case™ for iPad Pro 13 (M4), Air 13 (M2 & M3), & Pro 12.9 - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Apple iPad 10th & 11th Gen - Gray (RAM-TE-AP40-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the iPad 10th & 11th Gen, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock (look for the octagon icon on product listings). Features Key-locking, 2-piece enclosure for Apple iPad 10th & 11th Gen Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Apple iPad 10th & 11th Gen - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Zebra ET4x 8" Tablet - Gray (RAM-TE-ZE20-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Zebra ET4x 8", the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock (look for the octagon icon on product listings). Features Key-locking, 2-piece enclosure for Zebra ET4x 8" Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray Product dimensions - ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Zebra ET4x 8" Tablet - Key-Lock, several Hole Pattern, light gray

AirTag kľúčenka s kovovým krúžkom na jednoduché pripnutie, zvyšuje úroveň bezpečia lokalizačného čipu, vyrobené z materiálu koža, farebné vyhotovenie: čierna Ručne šitý prívesok pre Apple AirTagZaobstarajte si pre váš lokalizačný čip Apple AirTag spoľahlivú a štýlovú ochranu v podobe koženého puzdra FIXED Case for Airtag. Tento prívesok oplýva odolným a pevným pútkom z leštenej ocele, vďaka ktorému si ho pripnete kamkoľvek budete potrebovať. FIXED Case for AirTag je vyrobený z pravej talianskej kože Torcello a následne kompletne celé ručne ušité v Prostějove. Puzdro je navrhnuté priamo pre Apple AirTag a dáva tak úplne vyniknúť jeho originálnemu dizajnu. Výhodou voľby práve koža je nielen jemnosť na dotyk, ale aj vôňa a postupom času puzdro FIXED Case for Airtag získa unikátnu patinu.Kľúčové vlastnosti FIXED Case for AirTag z pravej hovädzej kože, čiernyFIXED Case for AirTag slúži ako štýlový kožený doplnok pre lokalizačný čip Apple AirTagPuzdro je...

Objav podobné ako FIXED Case for AirTag z pravej hovädzej kože s karabínkou čierna (FIXWAT-C2-BK)

AirTag kľúčenka s kovovým krúžkom na jednoduché pripnutie, zvyšuje úroveň bezpečia lokalizačného čipu, vyrobené z materiálu koža, farebné vyhotovenie: červená Ručne šitý prívesok pre Apple AirTagZaobstarajte si pre váš lokalizačný čip Apple AirTag spoľahlivú a štýlovú ochranu v podobe koženého puzdra FIXED Case for Airtag. Tento prívesok oplýva odolným a pevným pútkom z leštenej ocele, vďaka ktorému si ho pripnete kamkoľvek budete potrebovať. FIXED Case for AirTag je vyrobený z pravej talianskej kože Torcello a následne kompletne celé ručne ušitý v Prostějove. Puzdro je navrhnuté priamo pre Apple AirTag a dáva tak úplne vyniknúť jeho originálnemu dizajnu. Výhodou voľby práve koža je nielen jemnosť na dotyk, ale aj vôňa a postupom času puzdro FIXED Case for Airtag získa unikátnu patinu.Kľúčové vlastnosti FIXED Case for AirTag z pravej hovädzej kože, červenýFIXED Case for AirTag slúži ako štýlový kožený doplnok pre lokalizačný čip Apple AirTagPuzdro je...

Objav podobné ako FIXED Case for AirTag z pravej hovädzej kože s karabínkou červená (FIXWAT-C2-RD)

AirTag kľúčenka s kovovým krúžkom na jednoduché pripnutie, zvyšuje úroveň bezpečia lokalizačného čipu, vyrobené z materiálu koža, farebné vyhotovenie: modrá Ručne šitý prívesok pre Apple AirTagZaobstarajte si pre váš lokalizačný čip Apple AirTag spoľahlivú a štýlovú ochranu v podobe koženého puzdra FIXED Case for Airtag. Tento prívesok oplýva odolným a pevným pútkom z leštenej ocele, vďaka ktorému si ho pripnete kamkoľvek budete potrebovať. FIXED Case for AirTag je vyrobený z pravej talianskej kože Torcello a následne kompletne celé ručne ušitý v Prostějove. Puzdro je navrhnuté priamo pre Apple AirTag a dáva tak úplne vyniknúť jeho originálnemu dizajnu. Výhodou voľby práve koža je nielen jemnosť na dotyk, ale aj vôňa a postupom času puzdro FIXED Case for Airtag získa unikátnu patinu.Kľúčové vlastnosti FIXED Case for AirTag z pravej hovädzej kože, modrýFIXED Case for AirTag slúži ako štýlový kožený doplnok pre lokalizačný čip Apple AirTagPuzdro je...

Objav podobné ako FIXED Case for AirTag z pravej hovädzej kože s karabínkou modrá (FIXWAT-C2-BL)

AirTag kľúčenka s kovovým krúžkom na jednoduché pripnutie, zvyšuje úroveň bezpečia lokalizačného čipu, vyrobené z materiálu koža, farebné vyhotovenie: hnedá Ručne šitý prívesok pre Apple AirTagZaobstarajte si pre váš lokalizačný čip Apple AirTag spoľahlivú a štýlovú ochranu v podobe koženého puzdra FIXED Case for Airtag. Tento prívesok oplýva odolným a pevným pútkom z leštenej ocele, vďaka ktorému si ho pripnete kamkoľvek budete potrebovať. FIXED Case for AirTag je vyrobený z pravej talianskej kože Torcello a následne kompletne celé ručne ušitý v Prostějove. Puzdro je navrhnuté priamo pre Apple AirTag a dáva tak úplne vyniknúť jeho originálnemu dizajnu. Výhodou voľby práve koža je nielen jemnosť na dotyk, ale aj vôňa a postupom času puzdro FIXED Case for Airtag získa unikátnu patinu.Kľúčové vlastnosti FIXED Case for AirTag z pravej hovädzej kože, hnedýFIXED Case for AirTag slúži ako štýlový kožený doplnok pre lokalizačný čip Apple AirTagPuzdro je...

Objav podobné ako FIXED Case for AirTag z pravej hovädzej kože s karabínkou hnedá (FIXWAT-C2-BRW)

The RAM® Safe-Case™ for Apple iPad mini (A17 Pro) & mini 6 (RAM-TE-AP36) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Apple iPad mini, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for iPad mini (A17 Pro) & mini 6 Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Product dimensions - Overall Height 9.7", Overall Width 6.62", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Apple iPad mini (A17 Pro) & mini 6 - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Apple iPad mini (A17 Pro) & mini 6 (RAM-TE-AP36) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions- ideal for demanding field or industrial applications. Custom-fit for the Apple iPad mini, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for iPad mini (A17 Pro) & mini 6 Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Colour - light gray Product dimensions - Overall Height 9.7", Overall Width 6.62", Overall Thickness 0.79" Material(s) ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Case™ for Apple iPad mini (A17 Pro) & mini 6 - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Apple iPad 10th & 11th Gen (RAM-TE-AP40) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions ideal for demanding field or industrial applications. Custom-fit for the iPad 10th & 11th Gen features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Apple iPad 10th & 11th Gen Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 9.7", Overall Width 6.62", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Apple iPad 10th & 11th Gen - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Samsung Galaxy Tab S9 & S9 FE (RAM-TE-SAM86) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab S9 & S9 FE, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button—enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab S9 & S9 FE Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 12.02", Overall Width 7.84", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab S9 & S9 FE - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Samsung Galaxy Tab S9 & S9 FE - Gray (RAM-TE-SAM86-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab S9 & S9 FE, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab S9 & S9 FE Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab S9 & S9 FE - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Samsung Galaxy Tab S10 & S10+ (RAM-TE-SAM87) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab S10 & S10+, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab S10 & S10+ Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 13.24", Overall Width 8.61", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab S10 & S10+ - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Samsung Galaxy Tab S10 & S10+ - Gray (RAM-TE-SAM87-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab S10 & S10+, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab S10 & S10+ Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray Product dimensions - ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Case™ for Samsung Galaxy Tab S10 & S10+ - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Samsung Galaxy Tab A9+ (RAM-TE-SAM88) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab A9+, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab A9+ Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 12.13", Overall Width 7.95", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab A9+ - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Samsung Galaxy Tab A9+ - Gray (RAM-TE-SAM88-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab A9+, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab A9+ Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray Product dimensions - Overall Height 12.13", Overall Width 7.95", ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab A9+ - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Samsung Tab Active5 & 3 (RAM-TE-SAM99) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab Active5/3, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab Active5/3 Precision cutouts for ports, buttons, & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 10.47", Overall Width 6.35", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Samsung Tab Active5 & 3 - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Samsung Tab Active5 & 3 - Gray (RAM-TE-SAM99-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab Active5/3, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab Active5/4 Precision cutouts for ports, buttons, & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray Product dimensions - Overall Height 10.47", Overall Width ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Samsung Tab Active5 & 3 - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Zebra ET4x 8" Tablet (RAM-TE-ZE20) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Zebra ET4x 8", the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Zebra ET4x 8" Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 10.42", Overall Width 6.63", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Zebra ET4x 8" Tablet - Key-Lock, several Hole Pattern