dekoracny svietnik bloomingville feast candle holder

Dekoratívny svietnik v tvare domčeka s hviezdou na vrchole s dreveným podstavcom, na ktorom je umiestnený stojanček na čajovú sviečku. Minimalistická dekorácia, ktorá skvele doplní akýkoľvek interiér v období vianočných sviatkov. Po zápalení čajovej sviečky či zapnutí LED sviečky vytvorí svietnik útulné svetlo presvitajúce oknami domčeka, ktoré sa rozlinie po miestnosti.Vytrvorte si očarujúce prostredie domova a užite si hrejivú atmosféru tohtoročných Vianoc.

Objav podobné ako Dekoračný svietnik Chalúpka s hviezdou biela, 13 x 19 x 8 cm

Dekoratívny svietnik v tvare domčeka s hviezdou na vrchole s dreveným podstavcom, na ktorom je umiestnený stojanček na čajovú sviečku, je minimalistická dekorácia, ktorá skvele doplní akýkoľvek interiér v období vianočných sviatkov. Po zápalení čajovej sviečky či zapnutí LED sviečky vytvorí svietnik útulné svetlo presvitajúce oknami domčeka, ktoré sa rozline po miestnosti.Vytrvorte si očarujúce prostredie domova a užite si hrejivú atmosféru tohtoročných Vianoc.

Objav podobné ako Dekoračný svietnik Domček s hviezdou biela, 13 x 19 x 8 cm

Dekoratívny svietnik v tvare domčeka s hviezdou na vrchole s dreveným podstavcom, na ktorom je umiestnený stojanček na čajovú sviečku. Minimalistická dekorácia, ktorá skvele doplní akýkoľvek interiér v období vianočných sviatkov. Po zápalení čajovej sviečky či zapnutí LED sviečky vytvorí svietnik útulné svetlo presvitajúce oknami domčeka, ktoré sa rozline po miestnosti.Vytrvorte si očarujúce prostredie domova a užite si hrejivú atmosféru tohtoročných Vianoc.

Objav podobné ako Dekoračný svietnik Kostolík s hviezdou biela, 15 x 16 x 8 cm

stropný svietnik Eglo s farebným mixom
Eglo PASTORE 1 stropný svietnik
stropný svietnik do interiéru
stropný svietnik s krytím IP20
stropný svietnik Eglo TOTARI-Z
Eglo GOROSIBA 1 čierna stropný svietnik
Eglo 900832 stropný svietnik
stropný svietnik s LED technológiou

Dekoratívny svietnik v tvare domčeka s hviezdou na vrchole s dreveným podstavcom, na ktorom je umiestnený stojanček na čajovú sviečku. Minimalistická dekorácia, ktorá skvele doplní akýkoľvek interiér v období vianočných sviatkov. Po zápalení čajovej sviečky či zapnutí LED sviečky vytvorí svietnik útulné svetlo presvitajúce oknami domčeka, ktoré sa rozlinie po miestnosti.Vytrvorte si očarujúce prostredie domova a užite si hrejivú atmosféru tohtoročných Vianoc.

Objav podobné ako Dekoračný svietnik Chalúpka s hviezdou biela, 13 x 19 x 8 cm

Dekoratívny svietnik v tvare domčeka s hviezdou na vrchole s dreveným podstavcom, na ktorom je umiestnený stojanček na čajovú sviečku, je minimalistická dekorácia, ktorá skvele doplní akýkoľvek interiér v období vianočných sviatkov. Po zápalení čajovej sviečky či zapnutí LED sviečky vytvorí svietnik útulné svetlo presvitajúce oknami domčeka, ktoré sa rozline po miestnosti.Vytrvorte si očarujúce prostredie domova a užite si hrejivú atmosféru tohtoročných Vianoc.

Objav podobné ako Dekoračný svietnik Domček s hviezdou biela, 13 x 19 x 8 cm

Dekoratívny svietnik v tvare domčeka s hviezdou na vrchole s dreveným podstavcom, na ktorom je umiestnený stojanček na čajovú sviečku. Minimalistická dekorácia, ktorá skvele doplní akýkoľvek interiér v období vianočných sviatkov. Po zápalení čajovej sviečky či zapnutí LED sviečky vytvorí svietnik útulné svetlo presvitajúce oknami domčeka, ktoré sa rozline po miestnosti.Vytrvorte si očarujúce prostredie domova a užite si hrejivú atmosféru tohtoročných Vianoc.

Objav podobné ako Dekoračný svietnik Kostolík s hviezdou biela, 15 x 16 x 8 cm

Dekoratívny svietnik v tvare domčeka s hviezdou na vrchole s dreveným podstavcom, na ktorom je umiestnený stojanček na čajovú sviečku. Minimalistická dekorácia, ktorá skvele doplní akýkoľvek interiér v období vianočných sviatkov. Po zápalení čajovej sviečky či zapnutí LED sviečky vytvorí svietnik útulné svetlo presvitajúce oknami domčeka, ktoré sa rozlinie po miestnosti.Vytrvorte si očarujúce prostredie domova a užite si hrejivú atmosféru tohtoročných Vianoc.

Objav podobné ako Dekoračný svietnik Chalúpka s hviezdou biela, 13 x 19 x 8 cm

Dekoratívny svietnik v tvare domčeka s hviezdou na vrchole s dreveným podstavcom, na ktorom je umiestnený stojanček na čajovú sviečku, je minimalistická dekorácia, ktorá skvele doplní akýkoľvek interiér v období vianočných sviatkov. Po zápalení čajovej sviečky či zapnutí LED sviečky vytvorí svietnik útulné svetlo presvitajúce oknami domčeka, ktoré sa rozline po miestnosti.Vytrvorte si očarujúce prostredie domova a užite si hrejivú atmosféru tohtoročných Vianoc.

Objav podobné ako Dekoračný svietnik Domček s hviezdou biela, 13 x 19 x 8 cm

Dekoratívny svietnik v tvare domčeka s hviezdou na vrchole s dreveným podstavcom, na ktorom je umiestnený stojanček na čajovú sviečku. Minimalistická dekorácia, ktorá skvele doplní akýkoľvek interiér v období vianočných sviatkov. Po zápalení čajovej sviečky či zapnutí LED sviečky vytvorí svietnik útulné svetlo presvitajúce oknami domčeka, ktoré sa rozline po miestnosti.Vytrvorte si očarujúce prostredie domova a užite si hrejivú atmosféru tohtoročných Vianoc.

Objav podobné ako Dekoračný svietnik Kostolík s hviezdou biela, 15 x 16 x 8 cm

Svietnik NELA 2 | strieborná Moderné doplnky do vášho domu či bytu dokážu oživiť priestor a dodajú interiéru energiu. Rôzne štýly, typy a farby dekorácií zaručujú, že u nás si vyberie každý. Dekoračný svietnik NELA 2 v striebornej farbe zo skla navodí po zapálení sviečky príjemnú atmosféru . Nechajte sa inšpirovať našou ponukou. Materiál: sklo Rozmery (ŠxV): 12 x 8 cm Farebné prevedenie: strieborná Upozornenie: Váš monitor nemusí zobrazovať farby také, aké sú v skutočnosti!

Objav podobné ako ArtFir Svietnik NELA 02 | strieborná 12 x 8 cm

Modrý dekoračný svietnik NELA 3 Moderné doplnky do vášho domu či bytu dokážu oživiť priestor a dodajú interiéru energiu. Rôzne štýly, typy a farby dekorácií zaručujú, že u nás si vyberie každý. Dekoračný svietnik NELA 3 v tmavomodrej farbe so zlatým vnútrom navodia po zapálení sviečky príjemnú atmosféru . Nechajte sa inšpirovať našou ponukou. Materiál: sklo Rozmery (ŠxV): 12 x 8 cm Farebné prevedenie: tmavá modrá / zlatá Upozornenie: Váš monitor nemusí zobrazovať farby také, aké sú v skutočnosti!

Objav podobné ako ArtFir Svietnik NELA 3 | modrá

Svietnik NELA 2 | strieborná Moderné doplnky do vášho domu či bytu dokážu oživiť priestor a dodajú interiéru energiu. Rôzne štýly, typy a farby dekorácií zaručujú, že u nás si vyberie každý. Dekoračný svietnik NELA 2 v striebornej farbe zo skla navodí po zapálení sviečky príjemnú atmosféru . Nechajte sa inšpirovať našou ponukou. Materiál: sklo Rozmery (ŠxV): 12 x 8 cm Farebné prevedenie: strieborná Upozornenie: Váš monitor nemusí zobrazovať farby také, aké sú v skutočnosti!

Objav podobné ako ArtFir Svietnik NELA 02 | strieborná 12 x 8 cm

Modrý dekoračný svietnik NELA 3 Moderné doplnky do vášho domu či bytu dokážu oživiť priestor a dodajú interiéru energiu. Rôzne štýly, typy a farby dekorácií zaručujú, že u nás si vyberie každý. Dekoračný svietnik NELA 3 v tmavomodrej farbe so zlatým vnútrom navodia po zapálení sviečky príjemnú atmosféru . Nechajte sa inšpirovať našou ponukou. Materiál: sklo Rozmery (ŠxV): 12 x 8 cm Farebné prevedenie: tmavá modrá / zlatá Upozornenie: Váš monitor nemusí zobrazovať farby také, aké sú v skutočnosti!

Objav podobné ako ArtFir Svietnik NELA 3 | modrá

Svietnik NELA 2 | strieborná Moderné doplnky do vášho domu či bytu dokážu oživiť priestor a dodajú interiéru energiu. Rôzne štýly, typy a farby dekorácií zaručujú, že u nás si vyberie každý. Dekoračný svietnik NELA 2 v striebornej farbe zo skla navodí po zapálení sviečky príjemnú atmosféru . Nechajte sa inšpirovať našou ponukou. Materiál: sklo Rozmery (ŠxV): 12 x 8 cm Farebné prevedenie: strieborná Upozornenie: Váš monitor nemusí zobrazovať farby také, aké sú v skutočnosti!

Objav podobné ako ArtFir Svietnik NELA 02 | strieborná 12 x 8 cm

Modrý dekoračný svietnik NELA 3 Moderné doplnky do vášho domu či bytu dokážu oživiť priestor a dodajú interiéru energiu. Rôzne štýly, typy a farby dekorácií zaručujú, že u nás si vyberie každý. Dekoračný svietnik NELA 3 v tmavomodrej farbe so zlatým vnútrom navodia po zapálení sviečky príjemnú atmosféru . Nechajte sa inšpirovať našou ponukou. Materiál: sklo Rozmery (ŠxV): 12 x 8 cm Farebné prevedenie: tmavá modrá / zlatá Upozornenie: Váš monitor nemusí zobrazovať farby také, aké sú v skutočnosti!

Objav podobné ako ArtFir Svietnik NELA 3 | modrá

Yankee Candle Pop Clear, 1 ks, Svietniky Vôňa do bytu, Svietnik na votívnu sviečku Yankee Candle Pop Clear vytvorí vo vašom interiéri príjemnú atmosféru. Jednoducho do nej umiestnite svoju obľúbenú sviečku a vychutnávajte si jej príjemnú arómu. Použitie: Postupujte podľa priloženého návodu.

Objav podobné ako Yankee Candle Pop Clear sklenený svietnik na votívnu sviečku 1 ks

Kúpte si na sviatočný stôl alebo do okna tento krásny svietnik s LED sviečkami. Sviečky sú ozdobené zelenými vetvičkami. Napájanie je riešené pomocou 2 batérií AA, svietnik má časovač na 6 hodín.

Objav podobné ako Vianočný svietnik Candle Bridge hnedá, 7 LED

Kúpte si na sviatočný stôl alebo do okna tento krásny svietnik s LED sviečkami. Sviečky sú ozdobené zelenými vetvičkami. Napájanie je riešené pomocou 2 batérií AA, svietnik má časovač na 6 hodín.

Objav podobné ako Vianočný svietnik Candle Bridge hnedá, 7 LED

Kúpte si na sviatočný stôl alebo do okna tento krásny svietnik s LED sviečkami. Sviečky sú ozdobené zelenými vetvičkami. Napájanie je riešené pomocou 2 batérií AA, svietnik má časovač na 6 hodín.

Objav podobné ako Vianočný svietnik Candle Bridge hnedá, 7 LED

Ponorte sa do nekompromisného crossover thrash metalu s limitovanou edíciou vinylu 'The Fatal Feast' od Municipal Waste. Tento album, vydaný 4. apríla 2025, je dostupný v exkluzívnych oranžových a zlatých variantoch, ktoré oslavujú surovú energiu a humor kapely. 'The Fatal Feast' je nevyhnutným doplnkom pre zberateľov a fanúšikov žánru.

Objav podobné ako THE FATAL FEAST

Ponorte sa do nekompromisného crossover thrash metalu s limitovanou edíciou vinylu 'The Fatal Feast' od Municipal Waste. Tento album, vydaný 4. apríla 2025, je dostupný v exkluzívnych oranžových a zlatých variantoch, ktoré oslavujú surovú energiu a humor kapely. 'The Fatal Feast' je nevyhnutným doplnkom pre zberateľov a fanúšikov žánru.

Objav podobné ako THE FATAL FEAST

Ponorte sa do nekompromisného crossover thrash metalu s limitovanou edíciou vinylu 'The Fatal Feast' od Municipal Waste. Tento album, vydaný 4. apríla 2025, je dostupný v exkluzívnych oranžových a zlatých variantoch, ktoré oslavujú surovú energiu a humor kapely. 'The Fatal Feast' je nevyhnutným doplnkom pre zberateľov a fanúšikov žánru.

Objav podobné ako THE FATAL FEAST

Tekutý prací prostriedok, ktorý v sebe spája úspornosť pri praní a účinnosť čistenia v jednom.Oblečenie je po skončení pracieho cyklu čisté, ošetrené a s príjemnou decentnou vôňou. - vôňa Spring Fresh: vôňa jarnej sviežosti- vôňa Flower Feast: vôňa kvetinovej slávnosti Balenie postačuje na cca 30 praní.

Objav podobné ako ENDLESS POWER CLEAN - Tekutý prací prostriedok flower feast, 1,85 L

Tekutý prací prostriedok, ktorý v sebe spája úspornosť pri praní a účinnosť čistenia v jednom.Oblečenie je po skončení pracieho cyklu čisté, ošetrené a s príjemnou decentnou vôňou. - vôňa Spring Fresh: vôňa jarnej sviežosti- vôňa Flower Feast: vôňa kvetinovej slávnosti Balenie postačuje na cca 30 praní.

Objav podobné ako ENDLESS POWER CLEAN - Tekutý prací prostriedok flower feast, 1,85 L

Svietnik Bolsius 4v1 ponúka elegantný a čistý dizajn v sklenenom prevedení, ktoré sa ľahko zladí s akýmkoľvek interiérom - od moderného po rustikálne. Vďaka svojmu univerzálnemu tvaru a veľkosti umožňuje využitie pre rôzne druhy sviečok: čajové, klasické valcové alebo dekoratívne väčšie kusy. Transparentné sklo umožňuje plnému svetlu sviečky rozohrať atmosféru miestnosti, zatiaľ čo subtílne línie a hladký okraj dodávajú nádych jemnej elegancie. Svietnik sa skvele hodí na konferenčný stolík, jedálenský stôl aj komodu - či už na bežné použitie alebo slávnostné chvíle. Rozmery : spodný priemer 8,3 cm vnútorný spodný priemer 7,3 cm horný priemer 6 cm vnútorný horný priemer 4,7 cm otvor na úzku sviečku 2,2 cm výška 6,8 cm Materiál : sklo Farba : transparentné Použitie: úzke valcové sviečky, čajové sviečky, široké valcové sviečky Rady a tipy Aby svietnik Bolsius 4v1 dlho slúžil a vyzeral stále ako nový, odporúčame po vyhorení sviečky počkať, až sklo vychladne, a potom zvyšky vosku jemne odstrániť pomocou teplej vody a mäkkej handričky – sklo tak zostane priehľadné a bez škvŕn. Zvyšky vosku na podložke je možné ľahko vyčistiť pomocou papierového obrúska a mierne teplej žehličky – vosk sa vsiakne a povrch zostane nepoškodený. Pre ten správny efekt doplňte svietnik o vhodné sviečky , ktoré doň presne padnú, a vytvoríte tak dokonalú atmosféru. Pre maximálny efekt kombinujte tento svietnik s našimi vonnými sviečkami, ktoré prevoňajú a zútulnia priestor, alebo sa pozrite na ponuku čajových sviečok , ktoré presne pasujú na menšie veľkosti svietnika. Doplnok dekorácií, ako sú štýlové prestieranie a elegantné dekoratívne doplnky , pomôže vytvoriť kompletnú vizuálnu harmóniu vo vašom domove

Objav podobné ako Sklenený svietnik BOLSIUS 4v1

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.

Objav podobné ako RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE20PU holder is supplied.

Objav podobné ako RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PHU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE21PDU holder is supplied.

Objav podobné ako RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PDU holder is supplied.

Objav podobné ako RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE & RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts spring loaded (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PHLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PHLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Zebra MC9300/9400

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PDHU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts spring loaded (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Zebra MC9300/9400

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, WEEE & RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 with Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PLU:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with KeysInput Connector: USB-A Input Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PHU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PHU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Zebra MC9300/9400

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 without Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PL-1U:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with keyInput Connector: USB-AInput Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PL-1U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PHLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Zebra MC9300/9400

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDKLU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE & RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDKLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX10

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDHLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PDHLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDHLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDHLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Zebra MC9300/9400

This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDHU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDHU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Zebra MC9300/9400

This RAM Mounts spring loaded (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra MC9300/9400

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE21PDU holder is supplied.

Objav podobné ako RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector