dji rc cable usb c connector cp pt 000561

Príslušenstvo pre dron – kábel k diaľkovému ovládaniu USB-C, na DJI Mavic Náhradný kábel pre dron DJI Mavic s koncovkou USB-CNáhradný kábel pre pripojenie vášho zariadenia k diaľkovému ovládaniu Drone DJI Mavic. Koncovka pre pripojenie je USB typu C. Po pripojení sa dron ovláda pomocou špeciálnej aplikácie.Kľúčové vlastnostiKvalitné vyhotovenie káblaIdeálne, ak používate viac zariadení s inými koncovkamiOriginálny náhradný diel od výrobcu

Objav podobné ako DJI RC Cable (USB-C connector) (CP.PT.000561)

Tento RAM Mounts GDS Tough-Dock držiak s kľúčovým zámkom je určený pre Samsung Tab A9+ v IntelliSkin Next Gen ochrannom obale. Držiak nabíja tablet cez USB-C konektor a poskytuje USB-A port pre pripojenie periférií. Spodná časť držiaka je prispôsobená na pripevnenie na guľovú základňu.

• Bezpečné pripevnenie tabletu pomocou kľúčového zámku
• Nabíjanie tabletu cez USB-C konektor s výkonom 15W
• Podpora periférnych zariadení cez USB-A port
• Jednoduchá inštalácia a vyberanie tabletu

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

Stolová termálna prenosová tlačiareň štítkov TSC TE210 s rozlíšením 203 dpi a maximálnou šírkou potlaču 108 mm. Disponuje rýchlosťou potlaču až 152 mm/s, integrovaným Ethernetom, USB Host a podporou emulácie TSPL-EZ. Súčasťou balenia je napájací zdroj, USB kábel a príručka.

• Vysoká rýchlosť potlače až 152 mm/s pre efektívnu prácu
• Všestranná konektivita: USB, USB Host, RS232 a Ethernet
• Veľká pamäť 128 MB RAM a 64 MB Flash pre náročné úlohy
• Presné snímanie média pomocou Black Mark a Gap senzora

Objav podobné ako TSC TE210 99-065A30D-00LF00, 8 dots/mm (203 dpi), RTC, USB, USB Host, RS232, Ethernet, TSPL-EZ, kit (USB)

RC auto Carson VW Beattle Warrior 2WD 1:10
RC model s olejovými tlmičmi
RC truggy s náhonom na dve kolesá
rýchle RC auto až 40 km/h
herné slúchadlá s USB-A a USB-C
kompatibilita s USB 3.0 a USB-C
RAM-GDS-DOCKL-SAM88CDU držiak s USB-C a USB-A konektorom
volant s adaptérom USB-C na USB-A
16 TB externý disk s USB-C a Thunderbolt
2-deckový USB DJ mixážny pult s audio rozhraním
ASUS NUC 15 s USB 3.2 Gen2x2 Type-C
bezpečný obojok s USB káblom
CipherLab 2200 imager s USB káblom
CipherLab 2200 USB skener kit
Corsair 7000X RGB biela s USB-C
DELL Micro s portmi USB-C 90W

Elo Touch Solutions 03-Series je 15,6-palcový kapacitný dotykový monitor s rozlíšením Full HD. Disponuje dezinfikovateľným puzdrom s ochranou IP22 a podporuje 10 súčasných dotykov. Súčasťou balenia sú všetky potrebné káble, napájací zdroj a VESA držiak.

• Kapacitný dotykový displej s podporou 10 súčasných dotykov
• Dezinfikovateľný puzdra s certifikáciou IP22 pre náročné prostredie
• Kompletná sada vrátane napájania, káblov a VESA držiaku
• Univerzálne pripojenie cez USB-C, HDMI, VGA a audio porty

Objav podobné ako Elo Touch Solutions 03-Series, 39.6 cm (15,6''), Projected Capacitive, 10 TP, Full HD, USB-C, kit (USB), white

Datalogic Magellan 900i je 2D prezentacny skener navrhnuty pre retail prostredie. Ponasa multi-interface pripojenie (USB, RS232, IBM) a je vybaveny magnetickym stojanom. Disponuje ochranou IP52 a systemom Green Spot pre presne cielenie.

• 2D imager s vysokou rychlostou skenovania
• Multi-interface podpora (USB, RS232, IBM) pre flexibilne pripojenie
• Magneticky stojan pre jednoduche umiestnenie a stabilitu
• Ochrana IP52 proti prachu a kvapkam vody

Objav podobné ako Datalogic Magellan 900i MG0903-10001-0200, 2D, USB, multi-IF, kit (USB), white

Epson TM-J7700 je multifunkčná inkoustová tlačiareň s maximálnou šírkou tlače 72 mm a rýchlosťou 98 mm/s. Disponuje automatickým rezákom, podavačom papiera a pripojeniami USB 2.0 a Ethernet. Súčasťou balenia je napájací kábel, USB kábel, inkoustová kartridža a príručka.

• Automatický rezák pre pohodlné oddeľovanie tlačí
• Sieťové pripojenie Ethernet a USB pre flexibilné zapojenie
• Podavač papiera s maximálnou šírkou 137,8 mm
• Kompletná sada vrátane káblov a napájania

Objav podobné ako Epson TM-J7700, cutter, ASF, USB, Ethernet, kit (USB), white

Dotykový monitor Elo Touch Solutions 03-Series s uhlopriečkou 15,6 palcov a rozlíšením Full HD využíva kapacitnú technológiu s podporou 10 dotykov. Kryt je dezinfikovateľný a disponuje ochranou IP22, čo ho vhodný pre gastronómiu a priemyselné prostredia. Súčasťou balenia je kompletná káblová výbava vrátane napájacieho zdroja.

• Kapacitný multi-touch panel s podporou 10 súčasných dotykov
• Dezinfikovateľný puzdra a odolnosť IP22 pre náročné prostredia
• Kompletná sada vrátane napájania a káblov na okamžité použitie
• Univerzálna VESA montáž a moderné rozhranie USB-C

Objav podobné ako Elo Touch Solutions 03-Series, 39.6 cm (15,6''), Projected Capacitive, 10 TP, Full HD, USB-C, kit (USB), black

Epson TM-P20II je prenosná priama termálna tlačiareň s maximálnou šírkou média 58 mm. Ponúka rozlíšenie 203 dpi a maximálnu rýchlosť tlače 100 mm/s. Súčasťou balenia je batéria, USB kábel, pás na opasok a USB-C kábel, pričom napájací zdroj je potrebné dokúpiť samostatne.

• Kompaktný a ľahký dizajn vhodný na prenášanie
• Dvojité pripojenie: USB-C a Wi-Fi (802.11ac)
• Vysoká rýchlosť tlače až 100 mm/s
• Kompletná súprava s batériou a opaskom

Objav podobné ako Epson TM-P20II, 8 dots/mm (203 dpi), USB-C, Wi-Fi, kit (USB)

Nabíjačka – pre model Phantom 4 Stratil sa vám, či poničil pôvodné napájací adaptér k vašu kvadrokoptéře DJI Phantom 4 alebo chcete mať náhradný? Potom si kúpte tento kúsok. Jedná sa o originálny výrobok od spoločnosti DJI, čo znamená, že si môžete byť istí stopercentná kompatibilitou a vysokým výkonom. Týmto adaptérom môžete nabíjať aj diaľkový ovládač k kvadrokoptéře.Váš pôvodný napájací adaptér pre vašu kvadrokoptéru DJI Phantom 4 sa stratil alebo poškodil, alebo chcete mať náhradný? Potom si kúpte tento tip. Ide o originálny výrobok spoločnosti DJI, čo znamená, že si môžete byť istí stopercentnou kompatibilitou a vysokým výkonom. Týmto adaptérom môžete nabíjať aj diaľkový ovládač pre kvadrokoptéru. Kľúčové vlastnostiOriginálne príslušenstvoKvalitné vyhotovenieUpozornenie: balenie neobsahuje kábel AC

Objav podobné ako DJI Phantom 4, napájací adaptér, 100 W (bez kábla AC) (CP.PT.000344)

Príslušenstvo pre dron – pre DJI Phantom 4 Pro V2.0 a Phantom 4 Pro+ V2.0

Objav podobné ako DJI 9455S Rýchlo upínacie vrtule (1CW + 1CCW) (Phantom 4 PRO/PRO+ V2.0) (CP.PT.00000274.01)

Príslušenstvo pre inteligentného robota – pre DJI Robomaster S1

Objav podobné ako DJI Robomaster S1 Chassis Armor Kit (CP.RM.00000080.01)

Príslušenstvo pre inteligentného robota – pre DJI Robomaster S1

Objav podobné ako DJI Robomaster S1 PlayMore Kit V2 (CP.RM.00000099.02)

Príslušenstvo pre dron – pre DJI Mavic Air 2

Objav podobné ako DJI Mavic Air 2 ochranné oblúky (CP.MA.00000252.01)

Príslušenstvo pre dron – pre DJI Mavic Air 2

Objav podobné ako DJI Mavic Air 2 ochranný obal (CP.MA.00000254.01)

Príslušenstvo pre dron – pre DJI Mavic Air 2

Objav podobné ako DJI Mavic Air 2 ovládacie kniple (CP.MA.00000257.01)

Príslušenstvo pre dron – pre DJI Mini 2

Objav podobné ako DJI Mini 2 360° Propeller Guard (CP.MA.00000327.01)

Dron - 5.4K (5472 × 3078) kamera, dosah prenosu 12000 m, doba prevádzky 31 min, max. rýchlosť 68.4 km/h, GPS, online prenos, skladacie, detekcia prekážok, stabilizácia obrazu, otáčacia kamera, autonómny let a sledovanie objektov, 256 GB, hmotnosť 595 g, súčasťou balenia batéria, diaľkový ovládač, ochranný kryt, model, nabíjací adaptér, rc kábel lightning, rc kábel micro-usb, rc kábel usb-c, rc nabíjací kábel a súprava náhradných vrtúľ Dron s kamerou DJI Air 2S (EU) je splneným snom pre všetkých technických nadšencov. Do detailu vychytané ovládanie s pomocou ovládača sľubuje najkomfortnejšie riadenie letu. Ovládať dron môžete až na 12000 m, čo by malo plne postačiť na kvalitný záznam letu. Pri tomto variante kvadrokoptéry natočíte video s rozlíšením 5,4K (5472 × 3078) a vďaka stabilizácii obrazu eliminuje rozochvenie nahrávky v prípade vetra či otrasov. Akonáhle ho odpojíte od nabíjačky, dokáže tento model vo vzduchu vydržať 31 min a jeho maximálna rýchlosť...

Objav podobné ako DJI Air 2S (EU) (CP.MA.00000359.01)

Dron - 5.4K (5472 × 3078) kamera, dosah prenosu 12000 m, doba prevádzky 31 min, max. rýchlosť 68.4 km/h, GPS, online prenos, skladacie, detekcia prekážok, stabilizácia obrazu, otáčacia kamera, autonómny let a sledovanie objektov, 256 GB, hmotnosť 595 g, súčasťou balenia 3 batérie, taška, diaľkový ovládač, ochranný kryt, model, nabíjací adaptér, nabíjacia stanica, rc kábel lightning, rc kábel micro-usb, rc kábel usb-c, rc nabíjací kábel, súprava filtrov a súprava náhradných vrtúľ Dron s kamerou DJI Air 2S Fly More Combo (EU) vyniká nielen vychytaným dizajnom, ale aj letovými vlastnosťami. Vyladená kontrola s pomocou vysielačky garantuje najkomfortnejšie pilotovanie. Toto diaľkové ovládanie má dosah až 12000 m, čo by vám malo s rezervou stačiť na kvalitný záznam letu. Kvadrokoptéra vie natáčať videá s rozlíšením 5,4K (5472 × 3078) a vďaka prítomnosti funkcie stabilizácie obrazu eliminuje roztrasenie záberov v prípade vetra či otrasov. Akonáhle ho odpojíte od...

Objav podobné ako DJI Air 2S Fly More Combo (EU) (CP.MA.00000350.01)

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the "No Battery Mode" function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CD2U: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & Dual USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CD2U: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C & Dual USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Rechts) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9 & A7 Lite 8.7" in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9 & A7 Lite 8.7" - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-C port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-C (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CP-CU holder ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPDU holder ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDHU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Heated Pogo-Pins Lockable with key Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Holder (Key-Locking) for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - Heated Pogo-Pins - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM83CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM88CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CD2U: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & Dual USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5 - 12V ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-C port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C & USB-C (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V-12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CP-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPDHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Heated Pogo-Pins - Screw-Set

This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE16CPDU holder is supplied.

Objav podobné ako RAM Mounts GDS Holder for Zebra EC50 & EC55 in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE2434CPDU holder is supplied.

Objav podobné ako RAM Mounts GDS Holder for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power Output: 15W Output voltage: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPDU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPDU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

This RAM Mounts EZ-Roll’r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM60CPN-1AU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Input Connector: USB-C Output Connector: USB-A 1.1 (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support ... Unknown localization key: "more"

Objav podobné ako RAM Mounts EZ-Roll'r Modular Holder for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLT-AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-1AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62C-CU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62C-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Dual USB-C Connector