getac standard battery

Štandardná batéria, 6900mAh, vhodná pre: S510

Objav podobné ako Getac Standard-Battery

Štandardná batéria, 4990 mAh, 3.84V, pre: ZX10

Objav podobné ako Getac Standard Battery

Náhradná batéria, štandardná, 7.74V, 4070mAh, vhodné pre: F120, V120

Objav podobné ako Getac Spare Battery, Standard

lakovaná doska pod umývadlo Ideal Standard
štandardná slovenská norma zárubne
Ideal Standard Connect Air umývadlo 40x40 cm
Ideal Standard E034701
Ideal Standard Connect Air A7035AA
dvere do oceľovej zárubne slovenský štandard
Ideal Standard Idealrain Pro B9848AA
Ideal Standard Connect Air sedadlo

Honeywell standard battery, 4775MAH, fits for: CT45 / CT47

Objav podobné ako Honeywell CT4X-BTSC-002 standard battery

CT70 Battery Cup. Compatible with CT70 standard battery, wireless battery, and extended battery.

Objav podobné ako CT70 Battery Cup for QBC,5 Bay and 16 Bay

CT70 Homebase battery cup, compatible with standard battery, wireless battery, and extended battery

Objav podobné ako CT70 Battery Cup for Homebase/Ethernetbase

Štandardná batéria, bezdrôtové nabíjanie, 4400mAh, s PowerPrecision Plus, vhodná pre: TC58 (Premium Config), TC73/TC78

Objav podobné ako Zebra Standard Battery BTRY-NGTC5TC7-44MAWC-01, Wireless Charging

Štandardná batéria, 4400 mAh, balenie po 10, vhodná pre: TC53/58

Objav podobné ako Zebra BTRY-NGTC5TC7-44MA-10, Standard Battery

Štandardná batéria, 4775mAh, vhodná pre: CT45/CT47

Objav podobné ako Honeywell Standard Battery

Štandardná kapacita náhradnej batérie, s PowerPrecision, 3800mAh, vhodná pre: TC22, TC27

Objav podobné ako Zebra Standard Battery

Štandardná batéria s PowerPrecision a BLE Beacon, 3800mAh, vhodná pre: TC22, TC27

Objav podobné ako Zebra Standard Battery

Štandardná batéria, 8920mAh, vhodná pre: ET60, ET65

Objav podobné ako Zebra Standard Battery

Štandardná batéria, PowerPrecision, 4410mAh, vhodná pre: RFD8500

Objav podobné ako Zebra Standard Battery

Štandardná batéria, 4000mAh, s NFC anténou, vhodná pre: RS51

Objav podobné ako CipherLab Standard Battery

Štandardná, nabíjateľná batéria, CT37 DRH, dezinfikovateľný batériový balík, 3846mAh

Objav podobné ako Standard, Battery, CT37 DRH

Zebra interná štandardná batéria, 7 600 mAh, vhodná pre: ET401 (10 )

Objav podobné ako Zebra BTRY-ET401-10INC-01 internal Standard Battery, 10

Interná štandardná batéria Zebra, 6 100 mAh, vhodná pre: ET401 (8 )

Objav podobné ako Zebra BTRY-ET401-08INC-01 internal Standard Battery, 8

Štandardná batéria, bezdrôtové nabíjanie, 4400mAh, s PowerPrecision Plus, vhodná pre: TC58 (Premium Config), TC73/TC78

Objav podobné ako Zebra BTRY-NGTC5TC7-44MAWC-01 Standard Battery , Wireless Charging

Standard-Battery for CT70; 4775mAh

Objav podobné ako CT70 Battery

Toto je kompletná sada pre štandardnú inštaláciu umývadla. Je vyrobená z nerezu a má šírku roštu 100 cm. Sada obsahuje pripojenie pre odpad s priemerom DN 50.

• Kompletná sada pre jednoduchú inštaláciu
• Vyrobená z odolného nerezu
• Štandardné pripojenie odpadu DN 50
• Šírka roštu 100 cm pre väčšie umývadlá

Objav podobné ako Hansgrohe uBox Universal úplná sada pre štandardnú inštaláciu 100 cm nerez 56026180

Závesné keramické WC Connect od Ideal Standard má rozmery 54x36x34 cm a je vybavené zadným odpadom. Jeho moderný dizajn sa hodí do rôznych typov kúpeľní. Sedadlo nie je súčasťou dodávky.

• Elegantný keramický dizajn vhodný do moderných kúpeľní
• Zadný odpad pre jednoduchú inštaláciu a údržbu
• Kompaktné rozmery 54x36x34 cm pre úsporu priestoru
• Vysoká kvalita od renomovanej značky Ideal Standard

Objav podobné ako Ideal Standard Connect wc závesné zadný odpad E817401

Kryt na sifón pre umývadielka Connect od značky Ideal Standard, model E711401. Slúži na praktické a estetické zakrytie sifónu. Je vhodný pre inštaláciu v rôznych kúpeľniach.

• Praktický kryt na sifón pre umývadielka Connect.
• Výrobok od známej značky Ideal Standard.
• Vhodný do každej kúpeľne.
• Vodný výber pre estetické zakrytie sifónu.

Objav podobné ako Ideal Standard Connect kryt na sifón pro umývadielko E711401

Závesný set obsahuje rimless WC TESI Ideal Standard so sedátkom, modul Geberit Duofix, tlačidlo Delta 20 v bielej farbe a zvukoizolačnú vložku. Sada je určená pre moderné závesné inštalácie v kúpeľniach. Poskytuje kompletný systém pre efektívne a tiché splachovanie.

• Kompletný set pre jednoduchú inštaláciu závesného WC
• Rimless design pre jednoduchšie čistenie a hygienu
• Modul Geberit Duofix zabezpečuje stabilnú a odolnú konštrukciu
• Zvukoizolačná vložka znižuje hlučnosť pri splachovaní

Objav podobné ako Závesný set WC rimless TESI Ideal Standard + modul Geberit Duofix s tlačidlom Delta 20 biele KMPLSIKOGSTR

CT70 display dock for charging 1 CT70 and connecting to an external display.Compatible with CT70 standard battery and extended battery.Included in delivery: Display base, universal insert, power supply unit.Order separately: Power cord.

Objav podobné ako CT70 Displaydock, Standard

Getac Media Bay Battery, 11.1V, typická 4200mAh (1-balenie) vhodná pre: X600Pro

Objav podobné ako Getac Media Bay Battery

Batéria do vymeniteľného média, pre Getac B300

Objav podobné ako Getac media bay battery

Getac nabíjacia stanica na batérie, 2 sloty, vrátane.: napájací zdroj, napájací kábel (UK), vhodné pre: B360

Objav podobné ako Getac battery charging station, 2 slots, UK

Getac nabíjacia stanica na batérie, 2 sloty, vrátane.: napájací zdroj, napájací kábel, vhodné pre: B360

Objav podobné ako Getac battery charging station, 2 slots

Nabíjacia stanica na batérie Getac, 8 slotov, vrátane.: napájací zdroj, napájací kábel, vhodné pre: B360

Objav podobné ako Getac battery charging station, 8 slots

Nabíjacia stanica na batérie Getac, 8 slotov, vrátane.: napájací zdroj, napájací kábel (UK), vhodné pre: B360

Objav podobné ako Getac battery charging station, 8 slots, UK

Nabíjacia stanica na batérie Getac, 8 slotov, vrátane.: napájací zdroj, napájací kábel (EU), vhodné pre: K120

Objav podobné ako Getac battery charging station, 8 slots, EU

Nabíjacia stanica na batérie Getac, 8 slotov, vrátane.: napájací zdroj, napájací kábel (UK), vhodný pre: K120

Objav podobné ako Getac battery charging station, 8 slots, UK

Nabíjacia stanica na batérie Getac, 2 sloty, vrátane.: napájací zdroj, napájací kábel (UK), vhodný pre: K120

Objav podobné ako Getac battery charging station, 2 slots, UK

Nabíjacia stanica na batérie, 2 sloty: 2x Hlavná batéria, vrátane.: napájací zdroj (EU), pre Getac S410G4, X600

Objav podobné ako Getac battery charging station (EU)

Nabíjacia stanica na batérie Getac, 8 slotov, vrátane.: napájací zdroj, napájací kábel (UK), vhodný pre: T800

Objav podobné ako Getac battery charging station, 8 slots, UK

Nabíjacia stanica na batérie Getac, 8 slotov, vrátane.: napájací zdroj, napájací kábel (UK), vhodný pre: UX10

Objav podobné ako Getac battery charging station, 8 slots, UK

Nabíjacia stanica na batérie Getac, 8 slotov, vrátane.: napájací zdroj, napájací kábel (EU), vhodný pre: UX10

Objav podobné ako Getac battery charging station, 8 slots, EU

Nabíjacia stanica na batérie Getac, 2 sloty, vrátane.: napájací zdroj, napájací kábel (UK), vhodný pre: UX10

Objav podobné ako Getac battery charging station, 2 slots, UK

2-Slot Battery Charger, AC-Input: 100V–240 V, DC-Output: 13,05V, 2,4A, vrátane. EU-Power Cord, vhodný pre: F110G6

Objav podobné ako Getac 2-Slot Battery Charger

2-Slot Battery Charger, vrátane. Napájací zdroj a napájací kábel (EU), vhodné pre: S510

Objav podobné ako Getac 2-Slot Battery Charger, EU

2-Slot Battery Charger, vrátane. Napájací zdroj a napájací kábel (UK), vhodné pre: S510

Objav podobné ako Getac 2-Slot Battery Charger, UK

2-Slot Battery Charger, vrátane.: Napájací zdroj a napájací kábel (EU), vhodné pre: V120, F120

Objav podobné ako Getac 2-Slot Battery Charger, EU

2-Slot Battery Charger, vrátane.: Napájací zdroj a napájací kábel (UK), vhodné pre: V120, F120

Objav podobné ako Getac 2-Slot Battery Charger, UK

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, WEEE RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4U:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDKLU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDKLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX10

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with Keys Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5KLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2KLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2U: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC