kozena kabelka coach tabby chain clutch in signature canvas

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, Tab S9 & Tab S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM78CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 35 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM78CU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ in IntelliSkin Protective Sleeve - USB-C Power Supp

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU: Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CP-NFCU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

zrkadielko do kabelky rose gold
vykurovací kábel 27 metrov
kábel 1,3 m pre vykurovaciu tyč
vykurovací kábel na podlahu
napájací kábel 1,5 m
vykurovací kábel na podlahu s izoláciou
vykurovací kábel 17 m pre malé priestory
predlžovací kábel 2-pinový 2500 mm

This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab Active2, Active3 & Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62-MMU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Multi-Mode - USB-C & USB-A Co

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the "No Battery Mode" function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CPU holder is supplied.

Objav podobné ako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connector

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 & Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CU: Compatible with GDS hand-stand & more Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Transfer Speed: 5Gbps Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CU holder is supplied.

Objav podobné ako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Power Supply

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM62CPU holder is supplied.

Objav podobné ako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connect

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62C-CU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62C-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Dual USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization With Latch Input Connector: USB-C 3.1 Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Protective Sleeve - USB-C Power Supply

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-CAU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPT-CAU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts EZ-Roll’r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM60CPN-1AU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Input Connector: USB-C Output Connector: USB-A 1.1 (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM60CPN-1AU holder is supplied.

Objav podobné ako RAM Mounts EZ-Roll'r Modular Holder for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts EZ-Roll’r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM60CPN-CAU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM60CPN-CAU holder is supplied.

Objav podobné ako RAM Mounts EZ-Roll'r Modular Holder for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts Modular Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C and USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLN-CAU: Compatible with accessories and side accessory attachments Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLN-CAU holder is supplied.

Objav podobné ako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLN-CU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Output Connector: USB-C (Peripheral output - 500mAh) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLN-CU holder is supplied.

Objav podobné ako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Power & Data Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. The included RAM NFC extender supports the NFC function with a range of up to 30 cm. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, GDS Roto-Mag and side accessory attachments. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKL-NFCU: Compatible with accessories Including RAM NFC-Extender Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKL-NFCU holder is supplied.

Objav podobné ako RAM Mounts Form- Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Modular Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLNU: Compatible with accessories and side accessory attachments Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLNU holder is supplied.

Objav podobné ako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLT-AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLT-AU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral & data support is provided by the built-in dual USB-A & RJ45 (ethernet) cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLT-RJ45AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Output Connector: USB-A & RJ45 (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLT-RJ45AU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & Dual USB-A & RJ45(Ethernet) Conne

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLTU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLTU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-1AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPT-1AU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

Technic Cosmetics 3-In-1 Canvas, 8 ml, Korektory pre ženy, Chcete, aby vaše líčenie alebo aj takmer nenalíčenú tvár nekazila ani jediná chybička na kráse? Nech už sa vám na pleti nepáči čokoľvek, korektor Technic Cosmetics 3-In-1 Canvas to spoľahlivo zakryje. Vysoko pigmentované zloženie si poradí s kruhmi pod očami, pupienkami, pigmentovými škvrnami a najrôznejším začervenaním, ale napríklad aj pehami, pokiaľ ich budete chcieť skryť. Skrátka vám pomôže zamaskovať všetky nedokonalosti pleti natoľko dokonale, že o nich budete vedieť len vy. Spoľahnite sa na korektor, ktorý vašej tvári dodá úplne bezchybný, farebne jednotný vzhľad. Vlastnosti: dlhotrvajúci efekt zjednocuje odtieň pleti ľahko sa aplikuje rozjasňuje pleť krémová textúra Zloženie: vegánsky produkt Použitie: Pomocou aplikátora naneste korektor na miesto, ktoré si prajete zamaskovať. Rozotrite dostratena.

Objav podobné ako Technic Cosmetics 3-In-1 Canvas dlhotrvajúci korektor odtieň Porcelain 8 ml

Technic Cosmetics 3-In-1 Canvas, 8 ml, Korektory pre ženy, Chcete, aby vaše líčenie alebo aj takmer nenalíčenú tvár nekazila ani jediná chybička na kráse? Nech už sa vám na pleti nepáči čokoľvek, korektor Technic Cosmetics 3-In-1 Canvas to spoľahlivo zakryje. Vysoko pigmentované zloženie si poradí s kruhmi pod očami, pupienkami, pigmentovými škvrnami a najrôznejším začervenaním, ale napríklad aj pehami, pokiaľ ich budete chcieť skryť. Skrátka vám pomôže zamaskovať všetky nedokonalosti pleti natoľko dokonale, že o nich budete vedieť len vy. Spoľahnite sa na korektor, ktorý vašej tvári dodá úplne bezchybný, farebne jednotný vzhľad. Vlastnosti: dlhotrvajúci efekt zjednocuje odtieň pleti ľahko sa aplikuje rozjasňuje pleť krémová textúra Zloženie: vegánsky produkt Použitie: Pomocou aplikátora naneste korektor na miesto, ktoré si prajete zamaskovať. Rozotrite dostratena.

Objav podobné ako Technic Cosmetics 3-In-1 Canvas dlhotrvajúci korektor odtieň Ivory 8 ml

Odhoďte všetky zábrany a zažiarte vo všetkých smeroch s touto koženou dámskou kabelkou s dizajnom premysleným do posledného detailu. Kožená kabelka Innue V8562 je zhotovená z pravej kože s hladkým povrchom, uzatváraná zipsom. Vnútorný priestor dámskej kabelky je obohatený zipsovým priečinkom. Prednú stranu dotvára šemišový pásik, ktorý jej dodáva na štýlovosti. Dámska kabelka je vhodná na nosenie v ruke, na predlaktí a po pripnutí popruhu na ramene.

Objav podobné ako Kožená kabelka Innue V8562

Odhoďte všetky zábrany a zažiarte vo všetkých smeroch s touto koženou dámskou kabelkou s dizajnom premysleným do posledného detailu. Kožená kabelka Innue V8562 je zhotovená z pravej kože s hladkým povrchom, uzatváraná zipsom. Vnútorný priestor dámskej kabelky je obohatený zipsovým priečinkom. Prednú stranu dotvára šemišový pásik, ktorý jej dodáva na štýlovosti. Dámska kabelka je vhodná na nosenie v ruke, na predlaktí a po pripnutí popruhu na ramene.

Objav podobné ako Kožená kabelka Innue V8562

Odhoďte všetky zábrany a zažiarte vo všetkých smeroch s touto koženou dámskou kabelkou s dizajnom premysleným do posledného detailu. Kožená kabelka Innue V8562 je zhotovená z pravej kože s hladkým povrchom, uzatváraná zipsom. Vnútorný priestor dámskej kabelky je obohatený zipsovým priečinkom. Prednú stranu dotvára šemišový pásik, ktorý jej dodáva na štýlovosti. Dámska kabelka je vhodná na nosenie v ruke, na predlaktí a po pripnutí popruhu na ramene.

Objav podobné ako Kožená kabelka Innue V8562

Klasika a striedmi štýl. Klasický riešená dámska kabelka pre nekomplikované ženy, ktoré ocenia hlavne jej praktickosť. Kožená kabelka Pierre Cardin FRZ 1598 DOLLARO je vyrobená z pravej kože so štruktúrovaným povrchom, uzatváraná zipsom. Vnútro dámskej kabelky je doplnené zipsovým priečinkom a záložkou na telefón. Prednú stranu dotvára kovové logo spoločnosti Pierre Cardin v zlatej úprave. Dámska kabelka je vhodná na nosenie v ruke a na predlaktí.

Objav podobné ako Kožená kabelka Pierre Cardin FRZ 1598 DOLLARO

Dámska kožená kabelka Voyager 490 jednoduchý, ženský a prepracovaný doplnok, ktorý dokonale podčiarkne váš štýl Kabelka je vyrobená z pravej kože s jemne štruktúrovaným povrchom,uzatváraná na zips. Vnútro kabelky nie je členené, doplnené zipsovým priečinkom a záložkou na telefón. Prednú stranu zdobí vtlačené logo spoločnosti. Zadnú stranu zdobí zvislý zipsový priečinok. Kabelka je vhodná na nosenie v ruke, na predlaktí a po pripnutí popruhu na ramene.

Objav podobné ako 11383 Dámska kožená kabelka Voyager 490, skl.

Dámska kožená kabelka s moderným spracovaním. Kabelka má jeden hlavný priestor ktorý obsahuje zipsový priečinok a záložku na telefón. Predná strana kabelky je zdobená vyrazeným logom spoločnosti. Kabelka je vhodná na nosenie v ruke, na predlaktí a po pripnutí nastaviteľného popruhu na ramene. Spodná strana kabelky má ochranné kovanie proti oderu.

Objav podobné ako 10605 Dámska kožená kabelka Silvia 09, Skl.

Klasika a striedmi štýl. Klasický riešená dámska kabelka pre nekomplikované ženy, ktoré ocenia hlavne jej praktickosť. Kožená kabelka Pierre Cardin FRZ 1598 DOLLARO je vyrobená z pravej kože so štruktúrovaným povrchom, uzatváraná zipsom. Vnútro dámskej kabelky je doplnené zipsovým priečinkom a záložkou na telefón. Prednú stranu dotvára kovové logo spoločnosti Pierre Cardin v zlatej úprave. Dámska kabelka je vhodná na nosenie v ruke a na predlaktí.

Objav podobné ako Kožená kabelka Pierre Cardin FRZ 1598 DOLLARO

Dámska kožená kabelka Voyager 490 jednoduchý, ženský a prepracovaný doplnok, ktorý dokonale podčiarkne váš štýl Kabelka je vyrobená z pravej kože s jemne štruktúrovaným povrchom,uzatváraná na zips. Vnútro kabelky nie je členené, doplnené zipsovým priečinkom a záložkou na telefón. Prednú stranu zdobí vtlačené logo spoločnosti. Zadnú stranu zdobí zvislý zipsový priečinok. Kabelka je vhodná na nosenie v ruke, na predlaktí a po pripnutí popruhu na ramene.

Objav podobné ako 11383 Dámska kožená kabelka Voyager 490, skl.

Dámska kožená kabelka s moderným spracovaním. Kabelka má jeden hlavný priestor ktorý obsahuje zipsový priečinok a záložku na telefón. Predná strana kabelky je zdobená vyrazeným logom spoločnosti. Kabelka je vhodná na nosenie v ruke, na predlaktí a po pripnutí nastaviteľného popruhu na ramene. Spodná strana kabelky má ochranné kovanie proti oderu.

Objav podobné ako 10605 Dámska kožená kabelka Silvia 09, Skl.

Klasika a striedmi štýl. Klasický riešená dámska kabelka pre nekomplikované ženy, ktoré ocenia hlavne jej praktickosť. Kožená kabelka Pierre Cardin FRZ 1598 DOLLARO je vyrobená z pravej kože so štruktúrovaným povrchom, uzatváraná zipsom. Vnútro dámskej kabelky je doplnené zipsovým priečinkom a záložkou na telefón. Prednú stranu dotvára kovové logo spoločnosti Pierre Cardin v zlatej úprave. Dámska kabelka je vhodná na nosenie v ruke a na predlaktí.

Objav podobné ako Kožená kabelka Pierre Cardin FRZ 1598 DOLLARO

Dámska kožená kabelka Voyager 490 jednoduchý, ženský a prepracovaný doplnok, ktorý dokonale podčiarkne váš štýl Kabelka je vyrobená z pravej kože s jemne štruktúrovaným povrchom,uzatváraná na zips. Vnútro kabelky nie je členené, doplnené zipsovým priečinkom a záložkou na telefón. Prednú stranu zdobí vtlačené logo spoločnosti. Zadnú stranu zdobí zvislý zipsový priečinok. Kabelka je vhodná na nosenie v ruke, na predlaktí a po pripnutí popruhu na ramene.

Objav podobné ako 11383 Dámska kožená kabelka Voyager 490, skl.

Dámska kožená kabelka s moderným spracovaním. Kabelka má jeden hlavný priestor ktorý obsahuje zipsový priečinok a záložku na telefón. Predná strana kabelky je zdobená vyrazeným logom spoločnosti. Kabelka je vhodná na nosenie v ruke, na predlaktí a po pripnutí nastaviteľného popruhu na ramene. Spodná strana kabelky má ochranné kovanie proti oderu.

Objav podobné ako 10605 Dámska kožená kabelka Silvia 09, Skl.

Luxusná zbraň zvodnosti. Nielen štýlová ale aj krásna kožená kabelka Innue V7592 s dávkou tajomnosti a ženského šarmu. Je vyrobená z pravej kvalitne spracovanej štruktúrovanej kože, uzatváraná zipsom. Vnútro dámskej kabelky obohacuje zipsový priečinok a záložka na telefón. Zadná strana je doplnená menším zipsovým priečinkom. Dámska kabelka je vhodná na nosenie v ruke a na predlaktí.

Objav podobné ako Kožená kabelka Innue V7592

Luxusná zbraň zvodnosti. Nielen štýlová ale aj krásna kožená kabelka Innue V7592 s dávkou tajomnosti a ženského šarmu. Je vyrobená z pravej kvalitne spracovanej štruktúrovanej kože, uzatváraná zipsom. Vnútro dámskej kabelky obohacuje zipsový priečinok a záložka na telefón. Zadná strana je doplnená menším zipsovým priečinkom. Dámska kabelka je vhodná na nosenie v ruke a na predlaktí.

Objav podobné ako Kožená kabelka Innue V7592

Luxusná zbraň zvodnosti. Nielen štýlová ale aj krásna kožená kabelka Innue V7592 s dávkou tajomnosti a ženského šarmu. Je vyrobená z pravej kvalitne spracovanej štruktúrovanej kože, uzatváraná zipsom. Vnútro dámskej kabelky obohacuje zipsový priečinok a záložka na telefón. Zadná strana je doplnená menším zipsovým priečinkom. Dámska kabelka je vhodná na nosenie v ruke a na predlaktí.

Objav podobné ako Kožená kabelka Innue V7592

Kožená kabelka s ležérnym dizajnom, ktorá sa stane vašim obľúbeným doplnkom pri pracovných stretnutiach. Je vyrobená z pravej kože s hladkým povrchom, uzatváraná na zips. Vnútorný priestor kabelky je členený zipsovou kapsou a doplnený zipsovým priečinkom a záložkou na telefón. Vhodná na nosenie v ruke a po pripnutí nastaviteľného popruhu na ramene.

Objav podobné ako Kožená kabelka Camilla 777G

Kožená kabelka s ležérnym dizajnom, ktorá sa stane vašim obľúbeným doplnkom pri pracovných stretnutiach. Je vyrobená z pravej kože s hladkým povrchom, uzatváraná na zips. Vnútorný priestor kabelky je členený zipsovou kapsou a doplnený zipsovým priečinkom a záložkou na telefón. Vhodná na nosenie v ruke a po pripnutí nastaviteľného popruhu na ramene.

Objav podobné ako Kožená kabelka Camilla 777G

Klasická dámska kabelka ľahko sa kombinuje a určite by nemala chýbať medzi vašimi doplnkami. Je vyrobená z pravej kože so štruktúrovaným povrchom, uzatváraná klopou na kožený pásik a kovovú pracku, Vnútorný priestor kabelky je členený zipsovou kapsou, doplnený malým zipsovým priečinkom. Prednú stranu zdobí logo spoločnosti. Vhodná na praktické nosenie cez rameno.

Objav podobné ako 20077 Gregorio B866/JU - kožená kabelka skl.

Elegantná kožená kabelka s retiazkovým popruhom a praktickým formátom 23 × 18 × 12 cm. Štýlový doplnok pre ženy, ktoré milujú spojenie elegancie a originality. Dostupná v 4 odtieňoch: bordo, čierna, taupe a tmavohnedá.

Objav podobné ako Dámska kožená kabelka s retiazkovým popruhom – štýlový šperk medzi kabelkami Luka 25-030

Elegantná kožená kabelka s retiazkovým popruhom a praktickým formátom 23 × 18 × 12 cm. Štýlový doplnok pre ženy, ktoré milujú spojenie elegancie a originality. Dostupná v 4 odtieňoch: bordo, čierna, taupe a tmavohnedá.

Objav podobné ako Dámska kožená kabelka s retiazkovým popruhom – štýlový šperk medzi kabelkami Luka 25-030

Elegantná kožená kabelka s retiazkovým popruhom a praktickým formátom 23 × 18 × 12 cm. Štýlový doplnok pre ženy, ktoré milujú spojenie elegancie a originality. Dostupná v 4 odtieňoch: bordo, čierna, taupe a tmavohnedá.

Objav podobné ako Dámska kožená kabelka s retiazkovým popruhom – štýlový šperk medzi kabelkami Luka 25-030

Elegantná kožená kabelka s retiazkovým popruhom a praktickým formátom 23 × 18 × 12 cm. Štýlový doplnok pre ženy, ktoré milujú spojenie elegancie a originality. Dostupná v 4 odtieňoch: bordo, čierna, taupe a tmavohnedá.

Objav podobné ako Dámska kožená kabelka s retiazkovým popruhom – štýlový šperk medzi kabelkami Luka 25-030

Táto malá dámska kožená kabelka vyrobená z prírodnej kože je dokonalým doplnkom pre ženy, ktoré oceňujú štýl, kvalitu a praktickosť. Je kompaktná, no zároveň priestranná – ideálna na nevyhnutné veci, ako je telefón, peňaženka či kľúče. Kabelka má nastaviteľný ramenný popruh s dĺžkou 115 cm a výškou prieniku 55 cm, takže ju možno pohodlne nosiť na ramene alebo krížom cez telo.

Objav podobné ako Malá dámska kožená kabelka z prírodnej kože – elegantná a praktická

Táto malá dámska kožená kabelka vyrobená z prírodnej kože je dokonalým doplnkom pre ženy, ktoré oceňujú štýl, kvalitu a praktickosť. Je kompaktná, no zároveň priestranná – ideálna na nevyhnutné veci, ako je telefón, peňaženka či kľúče. Kabelka má nastaviteľný ramenný popruh s dĺžkou 115 cm a výškou prieniku 55 cm, takže ju možno pohodlne nosiť na ramene alebo krížom cez telo.

Objav podobné ako Malá dámska kožená kabelka z prírodnej kože – elegantná a praktická

Táto malá dámska kožená kabelka vyrobená z prírodnej kože je dokonalým doplnkom pre ženy, ktoré oceňujú štýl, kvalitu a praktickosť. Je kompaktná, no zároveň priestranná – ideálna na nevyhnutné veci, ako je telefón, peňaženka či kľúče. Kabelka má nastaviteľný ramenný popruh s dĺžkou 115 cm a výškou prieniku 55 cm, takže ju možno pohodlne nosiť na ramene alebo krížom cez telo.

Objav podobné ako Malá dámska kožená kabelka z prírodnej kože – elegantná a praktická