zebra p1063406 042 ram arm mounting plate

Montážna doska RAM pre rameno, objednáva sa samostatne: RAM Mount Kit, vhodná pre: sériu ZQ500.

Objav podobné ako Zebra P1063406-042 RAM arm mounting plate

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

nerezová mriežka zebra vzor
kuchynský rošt zebra dekorácia
rošt Alca 85 cm zebra dekor
nerezový rošt s mriežkou zebra
rošt zebra vzor nerez
nerezový rošt s dekorom zebra
sprchový žľab zebra dekor šedá lesk
sprchový žľab s mriežkou zebra

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2HU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PD2HU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2U:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PD2U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

Mounting plate, used to secure ethernet module to cradle

Objav podobné ako Zebra mounting plate

Zebra P1063406-025 Media Disk Support

Objav podobné ako Zebra P1063406-025 Media Disk Support

Zebra P1063406-041 belt loop

Objav podobné ako Zebra P1063406-041 belt loop

Zebra P1063406-034 adaptor

Objav podobné ako Zebra P1063406-034 adaptor

Zebra P1063406-040 belt clip, pack of 5

Objav podobné ako Zebra P1063406-040 belt clip, pack of 5

Zebra P1063406-035 shoulder strap

Objav podobné ako Zebra P1063406-035 shoulder strap

Zebra P1063406-061 baterie eliminator kit

Objav podobné ako Zebra P1063406-061 baterie eliminator kit

Zebra P1063406-043 exoskeleton case

Objav podobné ako Zebra P1063406-043 exoskeleton case

Zebra P1063406-044 exoskeleton case

Objav podobné ako Zebra P1063406-044 exoskeleton case

Zebra P1063406-045 USB kabel (A/micro USB), 1,8m

Objav podobné ako Zebra P1063406-045 USB kabel (A/micro USB), 1,8m

Zebra P1063406-062 auto Cradle

Objav podobné ako Zebra P1063406-062 auto Cradle

Zebra P1063406-038 soft case

Objav podobné ako Zebra P1063406-038 soft case

Zebra P1063406-026 D-Ring Adapter Kit

Objav podobné ako Zebra P1063406-026 D-Ring Adapter Kit

Zebra P1063406-049 adapter kabel

Objav podobné ako Zebra P1063406-049 adapter kabel

Zebra P1063406-052 charging station

Objav podobné ako Zebra P1063406-052 charging station

Arm mounting kit, VESA 75/100mm, max.weight: 10kg, incl.: C-Clamp

Objav podobné ako Advantech Arm Mounting kit

Zebra P1123335-042 Peeler, Kit

Objav podobné ako Zebra P1123335-042 Peeler, Kit

Zebra MT4510 RAM-Mount basis plate

Objav podobné ako Zebra MT4510 RAM-Mount basis plate

Mounting Plate, for Zebra docking station FLB3678 and mounting bracket BRKT-MM0036W-00 (DS36 Series)

Objav podobné ako Brodit Mounting Plate

Zebra BRKT-MM0036W-00 cradle mounting bracket

Objav podobné ako Zebra BRKT-MM0036W-00 cradle mounting bracket

Zebra CS-CAB-MNTG-C6 Mounting Bracket, Small / Medium

Objav podobné ako Zebra CS-CAB-MNTG-C6 Mounting Bracket, Small / Medium

Zebra BRKT-FX96-SVMP-01 mounting bracket

Objav podobné ako Zebra BRKT-FX96-SVMP-01 mounting bracket

Zebra KT-SCANMNT-VC80-R Mounting Holder

Objav podobné ako Zebra KT-SCANMNT-VC80-R Mounting Holder

Ľanové maliarske plátno na ráme MUSEAL | rôzne rozmery Ľanové maliarske plátno na ráme MUSEALĽanové maliarske plátno na ráme Museal je definované prvotriedou kvalitou. Toto nadčasové plátno je vyrobené zo 100% čistého ľanu, kvalitne natiahnuté so starostlivo natretým šepsom vo dvoch vrstvách. So 400 g/m² gramážou plátna a stredne veľkou štruktúrou 12,5 x 12,5 nití/m² je tou najlepšou voľbou pre tradičných a profesionálnych umelcov. Na plátne Museal dokonale vynikne olejomaľba, maľba akrylom, ale aj akvarelové a temperové diela. Od obľúbeného Profi maliarskeho plátna ARTMIE sa odlišuje výraznejšou štruktúrou.Ľanové plátno je vysoko cenené aj vďaka unikátnym vlastnostiam ľanu. Ľan je výnimočne pevné prírodné vlákno. Veľmi dobre odoláva oderom aj ostatným vplyvom prostredia. Ak chcete dosiahnuť vo svojom diele nadčasovosť a dopriať svojmu snaženiu rovnaký podklad ako starí majstri, rozhodnite sa pre Museal - talianske plátno. V Taliansku ako v kolíske umenia vedia oceniť kvalitu maliarskeho plátna. Vybrali sme si manufaktúru, ktorá sa postará o dokonalú prípravu plátna pre vás. Finálne, natiahnuté plátno na ráme je ručne vyrobené na Slovensku u nás v ARTMIE.Univerzálna príprava plátna jednou vrstvou prírodného lepidla a dvoma vrstvami šepsu Gesso zabezpečuje plátnu excelentné adhézne vlastnosti pre priľnavosť akrylových a olejových farieb. Gesso akrylátová disperzia dodá plátnu navyše vysokú odolnosť voči vlhkosti, zachová mu pružnosť a dlhotrvajúcu väzbu.Už pri prvých ťahoch štetcom prináša práca s ľanovým plátnom pôžitok. Drevo líšt pochádza z ekologických lesov. Pevný drevený rám zo smrekového dreva je kvalitnou oporou pre vaše dielo. Šírka líšt je 3,5 cm a hrúbka 2 cm.Kliny nie sú súčasťou balenia.Ľanové plátno Museal - výnimočné plátno narodené v prírode.Nadčasové, tradičné a stvorené pre veľké veci. Pozri si video ako použiť tento produkt

Objav podobné ako Ľanové maliarske plátno na ráme / rôzne rozmery

Datalogic 94ACC0303 mounting plate, charging-/communication station (3 slots)

Objav podobné ako Datalogic 94ACC0303 mounting plate, charging-/communication station (3 slots)

Mäkké puzdro, vrátane.: ramenný popruh, vhodný pre Zebra ZQ520, ZQ521

Objav podobné ako Zebra P1063406-037, Soft Case

Bezel Mounting Plate, fits for: SK1-211, SK1-311

Objav podobné ako Star Bezel Mounting Plate

Mounting Plate for Encoding Kits

Objav podobné ako Evolis Mounting Plate

Mounting Plate, raised, VESA 75/100, with AMPS holes.

Objav podobné ako Brodit Mounting Plate, Raised

Mounting Plate, VESA 75x75mm, AMPS Hole

Objav podobné ako Brodit Mounting Plate

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU:Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC ReaderAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25LU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

Sieťový zdroj/nabíjačka pre mobilné tlačiarne Zebra. Nabíja batérie po pripojení k tlačiarni..

Objav podobné ako Zebra P1031365-042 síťový zdroj pro QLn420, QLn320, QLn220, ZQ500, ZQ600

RAM Mounts Mounting Set - 2x Round Base Plate (AMPS), Middle Link Arm, C-Ball (1.5 ), in Poly Bag

Objav podobné ako RAM Mounts Mounting Set

RAM Mounts Mounting Set - D-Ball (2.25 ), Round Base Plate (93.5mm Diameter), Middle Link Arm, VESA Plate (75x75 100x100mm Hole Grid)

Objav podobné ako RAM Mounts Mounting Set

RAM Mounts Mounting Set - Round Base Plate (AMPS), Middle Link Arm, VESA Plate (75x75 mm Hole Grid), C-Ball (1.5 ), in Poly Bag

Objav podobné ako RAM Mounts Mounting Set

RAM Mounts Mounting Set - Round Base Plate (AMPS), Short Connection Arm, VESA Plate (75x75 mm Hole Grid), C-Ball (1.5 Inch), in Poly Bag

Objav podobné ako RAM Mounts Mounting Set

RAM Mounts Mounting Set - Round Base Plate (AMPS), Long Connection Arm, VESA Plate (75x75 100x100 mm Hole Grid), C-Ball (1.5 Inch), Polybeut

Objav podobné ako RAM Mounts Mounting Set

RAM Mounts Mounting Set - Round Base Plate (AMPS), Long Connection Arm, VESA Plate (75x75 mm Hole Grid), C-Ball (1.5 ), in Poly Bag

Objav podobné ako RAM Mounts Mounting Set

RAM Mounts Mounting Set for Zebra RW 420 Printer - with Round Base Plate (AMPS), Screw Set, C-Ball (1.5 Inch), in Poly Bag

Objav podobné ako RAM Mounts Mounting Set

RAM Mounts Mounting Set - 2x VESA Plate (75x75 mm Hole Grid), Middle Connecting Arm with Safety Lock, C-Ball (1.5 Inch), in a Poly Bag

Objav podobné ako RAM Mounts Mounting Set