zebra pwrs 14000 251r napajeci adapter for forklift

Tento ProClip adapter umožňuje montáž zariadenia Zebra Xcover Pro v Otterbox uniVERSE prípade na čítačku RFD40. Zabezpečuje komunikáciu cez eConnex alebo USB-C konektor. Ide o špecializovaný príslušenstvo pre profesionálne použitie.

• Umožňuje bezpečnú montáž Xcover Pro v Otterbox uniVERSE prípade na Zebra RFD40
• Komunikácia cez eConnex/USB-C konektor zabezpečuje spoľahlivé pripojenie
• Špeciálne navrhnutý pre profesionálne použitie v priemyselných podmienkach
• Jednoduchá inštalácia a kompatibilita s existujúcim hardvérom

Objav podobné ako Zebra 3PTY-PCLIP-216390 ProClip adapter, Xcover Pro, Otterbox uniVERSE case

Zebra 50-16000-182R AC line cord for napájecí adaptér (US)

Objav podobné ako Zebra 50-16000-182R AC line cord for napájecí adaptér (US)

Zebra 50-16000-255R AC line cord for napájecí adaptér (EU)

Objav podobné ako Zebra 50-16000-255R AC line cord for napájecí adaptér (EU)

náplň do tlačiarne IBM 14000 strán
adaptér bk20 pre wc držiak
adaptér GrandCHEF s hliníkovou vložkou
adaptér Hansa Electra 64490900
adaptér na indukciu 17 cm
adaptér na indukciu GrandCHEF 21 cm
adaptér na indukciu s hliníkovou vložkou
adaptér na indukčnú dosku GrandCHEF 12 cm
adaptér pre fontánu VEGA
adaptér pre hliníkový riad na indukciu
adaptér pre indukčnú dosku a liatinový riad
adaptér pre nemagnetický riad na indukciu
adaptér pre sklenený riad na indukciu
adaptér s odnímateľnou rukoväťou
batériový adaptér 4x AA napájanie
bezpečný indukčný adaptér s odnímateľnou rukoväťou

Zebra P1065668-010 napájecí adaptér, EU

Objav podobné ako Zebra P1065668-010 napájecí adaptér, EU

Zebra PWR-BUA5V16W0WW napájecí adaptér PWR-BUA5V16W0WW

Objav podobné ako Zebra PWR-BUA5V16W0WW napájecí adaptér PWR-BUA5V16W0WW

Zebra PWR-WUA5V6W0WW napájecí adaptér, USB

Objav podobné ako Zebra PWR-WUA5V6W0WW napájecí adaptér, USB

Zebra CHG-AUTO-HWIRE1-01 auto napájecí adaptér

Objav podobné ako Zebra CHG-AUTO-HWIRE1-01 auto napájecí adaptér

Zebra 105934-053 napájecí adaptér

Objav podobné ako Zebra 105934-053 napájecí adaptér

Napájanie vozidla, pre adaptér na zapaľovač cigariet, vhodné pre: TC7X držiak do vozidla.

Objav podobné ako Zebra CHG-AUTO-CLA1-01 auto napájecí adaptér, CLA

Datalogic 94ACC1380 napájecí adaptér, USB

Objav podobné ako Datalogic 94ACC1380 napájecí adaptér, USB

Datalogic 90ACC0350 napájecí adaptér

Objav podobné ako Datalogic 90ACC0350 napájecí adaptér

Datalogic 91ACC0048 napájecí adaptér

Objav podobné ako Datalogic 91ACC0048 napájecí adaptér

Datalogic 94ACC0197 napájecí adaptér

Objav podobné ako Datalogic 94ACC0197 napájecí adaptér

Datalogic 94ACC0196 napájecí adaptér

Objav podobné ako Datalogic 94ACC0196 napájecí adaptér

Datalogic 90ACC0196 napájecí adaptér

Objav podobné ako Datalogic 90ACC0196 napájecí adaptér

Datalogic 90ACC0194 napájecí adaptér

Objav podobné ako Datalogic 90ACC0194 napájecí adaptér

Datalogic 90ACC0193 napájecí adaptér

Objav podobné ako Datalogic 90ACC0193 napájecí adaptér

Datalogic 94ACC0161 napájecí adaptér

Objav podobné ako Datalogic 94ACC0161 napájecí adaptér

Zebra KT-CHS5000-1 napájecí stojánek pro CS4070 - zdroj + DC kabel

Objav podobné ako Zebra KT-CHS5000-1 napájecí stojánek pro CS4070 - zdroj + DC kabel

Nabíjačka do siete – pre akékoľvek modely iPhone a iPad. Bez napájacieho kábla. Originálny 5 W napájací adaptér od AppleChcete rýchlo, ale pritom úplne bezpečne nabíjať svoj iPhone alebo iné zariadenie? Zaobstarajte si do svojej výbavy 5 W napájací adaptér z originálnej produkcie spoločnosti Apple v klasickom bielom vyhotovení.Štandardné rozhranie USB-APomocou klasického konektora USB-A možno odovzdať energiu všetkým kompatibilným zariadeniam. Nabíjať tak môžete inteligentné mobilné telefóny, tablety, hodinky aj slúchadlá.Kľúčové vlastnosti nabíjačky Apple 5 WZákladný napájací adaptérVýkon nabíjačky 5 WŠtandardné rozhranie USB-AZ originálnej produkcie spoločnosti AppleNabíjací kábel sa predáva zvlášť

Objav podobné ako Apple USB 5 W napajecí adaptér (MGN13ZM/A)

This GDS Uni-Conn adapter is designed for selected IntelliSkin protective sleeves to make them compatible with the Uni-Conn system. The octagon-shaped adapter is easy to install before inserting the device into the protective sleeve. When it's time to upgrade your device fleet, simply replacing the IntelliSkin protective sleeve is all that’s needed. With its high compatibility, this adapter provides a reliable solution for seamless device integration into the Uni-Conn system. Product features RAM Mounts RAM-GDS-U1U-GRY: Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case series Easy insertion and removal Screw Set included Additional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as: Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+. For these device models, the adjustable adapter RAM-GDS-U1AU is recommended. Devices shown are not included in the delivery. Only the RAM-GDS-U1U-GRY adapter is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Adapter for IntelliSkin Protective Sleeves - Screw Set - Grey

The GDS Hand-Stand with Uni-Conn Adapter is a high-quality accessory for the Uni-Conn system that significantly improves tablet usability on flat surfaces.Designed for professional use in mobile environments, the Hand-Stand allows for stable positioning of the device, ensuring convenient and ergonomic operation.The Uni-Conn adapter is installed before inserting the tablet into the IntelliSkin protective sleeve.The result is a reliable and secure stand without compromising the mobility or protection of the device.Product features RAM Mounts RAM-GDS-U1HSKU:Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case seriesIncl. Uni-Conn AdapterEasy installationAdditional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as:Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+.Devices shown are not included in the delivery.Only the RAM-GDS-U1HSKU adapter is supplied.

Objav podobné ako RAM Mounts GDS Hand-Stand with Uni-Conn Adapter for IntelliSkin Next Gen Cases - Hard- and Thin-Case Series - Screw-Set - Gray

The GDS Hand-Stand with Uni-Conn Adapter is a high-quality accessory for the Uni-Conn system that significantly improves tablet usability on flat surfaces.Designed for professional use in mobile environments, the Hand-Stand allows for stable positioning of the device, ensuring convenient and ergonomic operation.The Uni-Conn adapter is installed before inserting the tablet into the IntelliSkin protective sleeve.The result is a reliable and secure stand without compromising the mobility or protection of the device.Product features RAM Mounts RAM-GDS-U1HSKU:Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case seriesIncl. Uni-Conn AdapterEasy installationAdditional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as:Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+.Devices shown are not included in the delivery.Only the RAM-GDS-U1HSKU adapter is supplied.

Objav podobné ako RAM Mounts GDS Hand-Stand with Uni-Conn Adapter for IntelliSkin Next Gen Cases - Hard- and Thin-Case Series - Screw-Set - Gray

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PD2KLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5mm DCOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PD2KLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PDU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PCLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingInput Connector: 5.5mm DCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PCLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PDCLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PDCLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PKLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5mm DCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PKLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PCLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingInput Connector: 5.5 mm DCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PCLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PKLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5mm DCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PKLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10CLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10CLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10KLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keysAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10KLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PDKLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5 mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PDKLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11KLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keysAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11KLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PDCLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingInput Connector: 5.5 mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PDCLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11CLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11CLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

Zebra ADP-MC32-CUP0-04 adapter cup

Objav podobné ako Zebra ADP-MC32-CUP0-04 adapter cup

Zebra ADP-MC93-CRDCUP-01 adapter cup

Objav podobné ako Zebra ADP-MC93-CRDCUP-01 adapter cup

Zebra ADP-RFD40-TC2X-1E adapter

Objav podobné ako Zebra ADP-RFD40-TC2X-1E adapter

Zebra ADP-RFD40-TC5X-1E adapter

Objav podobné ako Zebra ADP-RFD40-TC5X-1E adapter

Zebra CUP-SE-BTYADP1-01 Adapter cup

Objav podobné ako Zebra CUP-SE-BTYADP1-01 Adapter cup

Zebra CBL-TC8X-AUDQD-01 adapter kabel

Objav podobné ako Zebra CBL-TC8X-AUDQD-01 adapter kabel

Zebra MOD-MT2-EU1-01 adapter, ethernet

Objav podobné ako Zebra MOD-MT2-EU1-01 adapter, ethernet

Zebra P1063406-026 D-Ring Adapter Kit

Objav podobné ako Zebra P1063406-026 D-Ring Adapter Kit

Zebra P1080383-022 media core adapter

Objav podobné ako Zebra P1080383-022 media core adapter

Zebra P1080383-231, ribbon core adapter

Objav podobné ako Zebra P1080383-231, ribbon core adapter

Adaptér, Bluetooth sled adaptér pre Otterbix uniVERSE puzdrá, vhodný pre: RFD40 (Bluetooth zariadenia)

Objav podobné ako Zebra ADP-RFD40-BT-1R, Adapter

Media core adapter kit, 1.5', 2'', 3'' (sada 2 ks)), vhodné pre: ZD410, ZD420d, ZD620d

Objav podobné ako Zebra P1079903-033, media core adapter kit

Adaptér, umožňuje montáž TC3/TC58 na RFD40, vhodný pre: RFD40

Objav podobné ako Zebra ADP-RFD40-TC5X-2E, adapter

Adaptér umožňuje použitie VC80 s U-držiakom VC5090.

Objav podobné ako Zebra MNT-VC80-ADPA1-1 adapter