zebra sg et401 10exo 02 rugged boot 10

Toto je robustný ochranný rám pre mobilné terminály Zebra ET50 a ET55 s 8-palcovým displejom. Rám obsahuje odolný I/O konektor a chráni zariadenie pred mechanickým poškodením. Je určený pre priemyselné a logistické prostredia s náročnými podmienkami.

Robustná konštrukcia odolná voči nárazom a poškodeniam
Integrovaný odolný I/O konektor pre spoľahlivé pripojenie
Kompatibilita s modelmi Zebra ET50 a ET55 (8'')
Jednoduchá inštalácia a výmena pôvodného rámu

Objav podobné ako Zebra SG-ET5X-8RCSE2-02 rugged frame, 8''

290.49 €

Detail kúpiť

Zebra SG-EC5X-BOOT1-01 protective boot

Objav podobné ako Zebra SG-EC5X-BOOT1-01 protective boot

118.52 €

Detail kúpiť

Zebra SG-MC2X-RB1-01 rubber boot

Objav podobné ako Zebra SG-MC2X-RB1-01 rubber boot

19.72 €

Detail kúpiť

Zebra SG-MC2X-RBH2-01 rubber boot

Objav podobné ako Zebra SG-MC2X-RBH2-01 rubber boot

19.72 €

Detail kúpiť

Zebra SG-MC33-RBTG-01 rubber boot

Objav podobné ako Zebra SG-MC33-RBTG-01 rubber boot

14.94 €

Detail kúpiť

Zebra SG-MC33-RBTS-01 rubber boot

Objav podobné ako Zebra SG-MC33-RBTS-01 rubber boot

14.94 €

Detail kúpiť

Zebra SG-MC93-RBTG-01 rubber boot

Objav podobné ako Zebra SG-MC93-RBTG-01 rubber boot

14.94 €

Detail kúpiť

Zebra SG-TC5X-EXONHS-01 protection boot

Objav podobné ako Zebra SG-TC5X-EXONHS-01 protection boot

76.99 €

Detail kúpiť

Zebra SG-TC51-WMADP1-02 wrist mount adapter

Objav podobné ako Zebra SG-TC51-WMADP1-02 wrist mount adapter

338.63 €

Detail kúpiť

Zebra SG-TC7X-HLSTR1-02 holster

Objav podobné ako Zebra SG-TC7X-HLSTR1-02 holster

146.22 €

Detail kúpiť

Zebra SG-NGWT-WRMTL-02 wrist mount, M/L

Objav podobné ako Zebra SG-NGWT-WRMTL-02 wrist mount, M/L

186.78 €

Detail kúpiť

Zebra SG-NGWT-WRMTS-02 wrist mount, S/M

Objav podobné ako Zebra SG-NGWT-WRMTS-02 wrist mount, S/M

186.78 €

Detail kúpiť

Zebra SG-MC34-RBTG-01 rubber boot

Rubber boot, fits for: MC3400, MC3450 (with gun)

Objav podobné ako Zebra SG-MC34-RBTG-01 rubber boot

15.02 €

Detail kúpiť

Zebra SG-MC34-RBTS-01 Rubber Boot

Rubber boot, bottom section must be peeled back before inserting to cradle, fits for: MC34 (Brick)

Objav podobné ako Zebra SG-MC34-RBTS-01 Rubber Boot

15.15 €

Detail kúpiť

Zebra SG-WEAR-HNWPRS-02 hand strap

Zebra hand strap, fits for: RS5100, RS6100, WS50

Objav podobné ako Zebra SG-WEAR-HNWPRS-02 hand strap

64.16 €

Detail kúpiť

Zebra SG-WEAR-HNWPRS-02 hand strap

Zebra ručný popruh, vhodný pre: RS5100, RS6100, WS50

Objav podobné ako Zebra SG-WEAR-HNWPRS-02 hand strap

64.16 €

Detail kúpiť

Zebra SG-WS5X-BHMT-02 Back of Hand Mount

Zebra Back of Hand Mount, fits for: WS501

Objav podobné ako Zebra SG-WS5X-BHMT-02 Back of Hand Mount

124.05 €

Detail kúpiť

Zebra SG-NGTC5-WMADP1-02, Arm Mount

Ramenný držiak, otočný dizajn, vrátane. carrier, komfortná podložka a remienok na zápästie, vyžaduje Rugged Boot, vhodné pre: TC53, TC58

Objav podobné ako Zebra SG-NGTC5-WMADP1-02, Arm Mount

326.63 €

Detail kúpiť

RAM Mounts Form-Fit Holder (key-locking) for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PDKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Lockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.This dock is not compatible with IntelliSkin.For IntelliSkin ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Zebra ET40/45 (8")

205.63 €

Detail kúpiť

RAM Mounts EZ-Roll’r Holder (key-locking) for Zebra ET40/45 (8")

This RAM Mounts EZ-Roll‘r (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Lockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE20PKLU holder is supplied.

Objav podobné ako RAM Mounts EZ-Roll’r Holder (key-locking) for Zebra ET40/45 (8")

189.7 €

Detail kúpiť

RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (8")

This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional informations: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (8")

138.25 €

Detail kúpiť

RAM Mounts Form-Fit Holder (Latch) for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PNLLU:Compatible with PowerPack batterieEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE20PU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE20PNLLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET40/45 (8")

159.88 €

Detail kúpiť

Zebra SG-ET4X-10EXOSKL1-01, ET4X Rugged Boot

Objav podobné ako Zebra SG-ET4X-10EXOSKL1-01, ET4X Rugged Boot

133.17 €

Detail kúpiť

Zebra SG-ET4X-8EXOSKL1-01, ET4X Rugged Boot

Objav podobné ako Zebra SG-ET4X-8EXOSKL1-01, ET4X Rugged Boot

133.17 €

Detail kúpiť

Zebra SG-NGTC5EXO1-01, rugged boot

Objav podobné ako Zebra SG-NGTC5EXO1-01, rugged boot

79.35 €

Detail kúpiť

Zebra SG-NGTC5EXORED1-01 Rugged Boot, Red/Black

Rugged Boot, color: Red/Black, requires: Trigger Handle and RFID sled, fits for: TC53, 58

Objav podobné ako Zebra SG-NGTC5EXORED1-01 Rugged Boot, Red/Black

76.94 €

Detail kúpiť

Zebra ET401, 2D, SR500, 25.4 cm (10''), GPS, USB-C, BT, Wi-Fi (Wi-Fi 7), eSIM, 5G, NFC, Android, GMS, RB, black

Zebra ET401 je 10-palcový priemyselný tablet s operačným systémom Android a ochranou IP68. Disponuje 2D snímačom SR500, rýchlym 5G pripojením a odnímateľnou batériou. Vhodný pre terénne použitie v logistike, maloobchode alebo priemysle.