zebra tc8000 cart mount ram 2 5

TC8000 držiak na vozík RAM 2,5 guľová základňa

Objav podobné ako Zebra TC8000 cart mount RAM 2,5

Zebra PSS-3SH01-00R shopping cart mount

Objav podobné ako Zebra PSS-3SH01-00R shopping cart mount

TC8000 RAM Double Socket Rameno. Kompatibilné s držiakom na vozík TC8000

Objav podobné ako Zebra TC8000 Double Socket Arm

nerezový rošt s mriežkou zebra
rošt zebra vzor nerez
nerezový rošt s dekorom zebra
sprchový žľab zebra dekor šedá lesk
sprchový žľab s mriežkou zebra
lesklý sprchový žľab zebra
nerezový sprchový žľab lesklý zebra
sprchový žľab zebra 75 cm plast

Zebra KT-U-MOUNT-VC80-R, U-Mount

Objav podobné ako Zebra KT-U-MOUNT-VC80-R, U-Mount

Zebra MT4200 qrelease mount

Objav podobné ako Zebra MT4200 qrelease mount

This RAM Mounts Quick-Draw Form-Fit holder is suitable for Zebra TC8000 TC8300.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE9U:Spring-loaded design for easy insertion and removalAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE9U holder is supplied.

Objav podobné ako RAM Mounts Quick-Draw Form-Fit Holder for Zebra TC8300

prenosné zariadenie na zber dát, 2D, imager (SE4770), veľkosť obrazovky: 5.1 cm (2 ), Dotyková obrazovka, kapacitná, rozlíšenie: 460x460 pixelov, reproduktor, vibrácie, pripojenie: USB, Qualcomm Quad Core, 2.0 GHz, RAM: 3 GB, Flash: 32 GB, Android (14), vrátane.: batéria, 1300mAh, vyberateľná batéria, objednať samostatne: napájací kábel, napájací zdroj, IP65

Objav podobné ako Zebra WS501, Finger Mount, 2D, SE4770, USB, Android, RB

Rošt Alca LINE-850M je vyrobený z nerezovej ocele s šírkou 85 cm. Disponuje mriežkou v dekore zebra a je dostupný v matnom prevedení. Ide o praktický a odolný kuchynský doplnok.

• Vyrobený z odolnej nerezovej ocele.
• Matné povrchové spracovanie odolné proti škrabancom.
• Dekor mriežky zebra pre moderný vzhľad.
• Šírka 85 cm vhodná pre väčšie varné plochy.

Objav podobné ako Rošt Alca 85 cm nerez mat zebra LINE-850M

Rošt Alca PURE-1150M je vyrobený z nerezu s šírkou 115 cm. Povrch má matné spracovanie a dekor zebra. Ide o funkčný a estetický prvok do kuchyne.

• Vyrobený z kvalitnej nehrdzavejúcej ocele.
• Matné povrchové spracovanie je odolné a ľahko sa čistí.
• Dekor zebra dodáva roštu moderný a elegantný vzhľad.
• Štandardná šírka 115 cm je vhodná pre väčšinu kuchýň.

Objav podobné ako Rošt Alca 115 cm nerez mat zebra PURE-1150M

Rošt Alca vyrobený z nerezovej ocele so šírkou 39 cm. Povrch je matný s dekorom zebra. Vhodný pre bežné použitie v kuchyni.

• Vyrobený z kvalitnej nerezovej ocele
• Matné povrchové spracovanie odolné proti škrabancom
• Dekor zebra dodáva moderný vzhľad
• Šírka 39 cm ideálna pre väčšie panvice

Objav podobné ako Rošt Alca 39 cm nerez mat zebra TIME

Sprchový žľab z plastu s šírkou roštu 85 cm a dekorom zebra v šedej lesklej farbe. Má minimálnu stavebnú výšku 6,2 cm a odpad s priemerom DN 40. Balenie obsahuje sifón a montážne nohy.

• Široký rošt 85 cm pre pohodlné sprchovanie
• Elegantný lesklý povrch v dekore zebra
• Kompletná sada vrátane sifónu a montážnych nôh
• Minimálna stavebná výška len 6,2 cm

Objav podobné ako Ravak Zebra sprchový žľab 85 cm plast šedá lesk x01434 OZZEBRA850PL

Sprchový žľab z plastu s šírkou roštu 75 cm a lesklým povrchom. Obsahuje mriežku v zebra dekore a odpad s priemerom DN 40. Súčasťou balenia je sifón a nohy.

• Dekoratívna mriežka v zebra vzore
• Minimálna stavebná výška len 6,2 cm
• Kompletná sada vrátane sifónu a nôh

Objav podobné ako Ravak Zebra sprchový žľab 75 cm plast šedá lesk x01433 OZZEBRA750PL

Rošt Alca vyrobený z nerezovej ocele so šírkou 55 cm. Disponuje dekorom zebra v matnom čiernom prevedení. Vhodný pre kuchynské použitie.

• Vyrobený z kvalitnej nerezovej ocele pre dlhú životnosť
• Štýlový zebra dekor v matnom čiernom prevedení
• Šírka 55 cm ideálna pre väčšie kuchynské spotrebiče
• Jednoduchá údržba a čistenie vďaka nerezovému materiálu

Objav podobné ako Rošt Alca 55 cm nerez černá mat zebra PURE-550BLACK

Rošt Alca LINE-750M je vyrobený z nerezovej ocele s matným povrchom. Disponuje mriežkou v dekore zebra a šírkou 75 cm. Je vhodný pre použitie v kuchyniach.

• Vyrobený z odolnej nerezovej ocele
• Matný povrch odolný proti škrabancom
• Dekor mriežky zebra pre lepšiu priľnavosť
• Šírka 75 cm vhodná pre väčšie variče

Objav podobné ako Rošt Alca 75 cm nerez mat zebra LINE-750M

Rošt Alca GAP-300M je vyrobený z nerezovej ocele s šírkou 30 cm. Disponuje matným povrchom a mriežkou v dekore zebra. Vhodný pre každodenné použitie v domácnosti.

• Vyrobený z odolnej nerezovej ocele
• Matné povrchové spracovanie odolné proti škrabancom
• Dekor mriežky zebra zlepšuje priľnavosť potravín
• Šírka 30 cm ideálna pre bežné použitie v kuchyni

Objav podobné ako Rošt Alca 30 cm nerez mat zebra GAP-300M

Sprchový žľab Tece Linus s dĺžkou 70 cm je vyrobený z nerezu v lesklom prevedení. Má mriežku v dekore zebra a priemer odpadu DN 50. Balenie obsahuje sifón a montážne nohy.

• Vyrobený z odolného nerezu v lesklom prevedení.
• Dodáva sa s mriežkou v modernom dekore zebra.
• Súčasťou balenia je sifón a montážne nohy.
• Minimálna stavebná výška len 7 cm pre ľahšiu inštaláciu.

Objav podobné ako Tece Linus sprchový žľab 70 cm nerez lesk zebra 15100079 15.100.070

Sprchový žľab Tece Linus je vyrobený z nerezu s lesklým povrchom a šírkou roštu 84 cm. Jeho celková dĺžka je 90 cm a minimálna stavebná výška 7 cm. Súčasťou balenia je mriežka v dekore zebra, sifón, montážne nohy a odpad s priemerom DN 50.

• Vyrobený z kvalitného nerezu v lesklom prevedení.
• Dodáva sa s mriežkou v modernom dekore zebra.
• Súčasťou balenia je sifón a montážne nohy.
• Minimálna stavebná výška len 7 cm.

Objav podobné ako Tece Linus sprchový žľab 90 cm nerez lesk zebra 15100099 15.100.090

Sprchový žľab Tece Linus je vyrobený z nerezu s lesklým povrchom a šírkou roštu 74 cm. Je dodávaný s mriežkou v dekore zebra a odpadom pre pripojenie DN 50. Balenie obsahuje sifón a montážne nohy.

• Nerezová konštrukcia v lesklom prevedení
• Mriežka v modernom dekore zebra
• Súčasťou balenia sú sifón a montážne nohy
• Minimálna stavebná výška len 7 cm

Objav podobné ako Tece Linus sprchový žľab 80 cm nerez lesk zebra 15100089 15.100.080

RAM Mounts univerzálny držiak na tablet 9" a 10" EAN: 793442933936 Popis produktu Univerzálny držiak na tablety 9" a 10". Kompatibilný s RAM úchytov a ramenami. Horná upínacia čeľusť pružinová. Zaisťuje spoľahlivosť a jednoduchosť uchytenia. Rozmery Súprava 1: Výška 209,55 – 273 mm, šírka do 172,72 mm, hĺbka do 12,7 mm. Súprava 2: Výška 215,9 – 273 mm, šírka do 196,85 mm, hĺbka do 14,2 mm. Materiál Nerez oceľ, vysokopevnostný plast. Prednosti Voľný prístup ku konektorom Jednoduché vloženie a vybratie zariadenia Kvalitný plast Dokonalé spracovanie Kompatibilný s RAM mount systémom Doživotná záruka RAM mount Upozornenie Držiak je časť trojdielneho riešenia. Na zostavenie je potrebné rameno a úchyt. Rady a nosnosti Séria „A“ pre zariadenia do hmotnosti 0,23 kg. Séria „B“ pre zariadenia do hmotnosti 0,91 kg. Séria „C“ pre zariadenia do hmotnosti 1,81 kg. Rad „D“ pre zariadenie do hmotnosti 2,72 kg. Séria „E“ pre zariadenia do hmotnosti 6,8 kg. O systéme držiakov RAM mount RAM poskytuje patentovaný systém guľových čapov a ramien so svorkami. Umožňuje zostaviť držiak podľa potreby. Kovový alebo plastový diel? RAM mount garantuje rovnaké pevnostné parametre a doživotnú záruku pre oboch. Plastové diely sú ľahšie a lacnejšie. Kovové diely majú prémiový vzhľad. O RAM mount Zaisťuje bezpečné uchytenie elektronických prístrojov. Vysoká kvalita a spoľahlivosť. Široké uplatnenie. Výrobca: National Products Inc., Seattle, USA.

Objav podobné ako RAM Mounts univerzálny držiak na tablet 9" a 10" bez alebo s puzdrom

Inštalačný rám je určený pre štvrťkruhové sprchové vaničky Kaldewei Arrondo. Rám je nastaviteľný a podporuje vaničky do veľkosti 100x100 cm. Umožňuje jednoduchú a stabilnú montáž vaničky.

• Nastaviteľný rám pre flexibilnú montáž
• Kompatibilný so štvrťkruhovými vaničkami Kaldewei Arrondo
• Maximálna podporovaná veľkosť 100x100 cm

Objav podobné ako Kaldewei Arrondo inštalačný rám štvrťkruh pre sprchové vaničky 530000170000 KW530017

Sprchový kanálek Geberit CleanLine80 s dĺžkou 130 cm je vyrobený z leštenej nehrdzavejúcej ocele. Poskytuje odtok sprchy na úrovni podlahy a je vhodný pre bezbariérovú výstavbu. Hrubá inštalačná sada nie je súčasťou dodávky a musí sa zakúpiť samostatne.

• Leštený rám a povrch z nehrdzavejúcej ocele pre odolnosť a estetický vzhľad
• Bezúrovňový odtok sprchy vhodný pre bezbariérovú výstavbu
• Možnosť inštalácie do podlahy alebo na stenu pre flexibilitu

Objav podobné ako Geberit CleanLine80 sprchový kanálek 130 cm, rám nerez ocel leštěná, 154.441.KS.1plocha nerez ocel kartáčovaná,

Dlažba Cir Metallo Rame je reštifikovaná dlažba s rozmermi 100x100 cm a hrúbkou 8,5 mm. Vyznačuje sa matným povrchom v kovovom dizajne s výraznými variáciami v odtieni, štruktúre a kresbe. Je mrazuvzdorná, odolná proti opotrebovaniu a vhodná do interiéru aj exteriéru, vrátane hál, obchodov a garáží.

• Reštifikovaná dlažba s presnými rozmiermi pre jednoduchú pokládku.
• Mrazuvzdorná a vysoko odolná proti opotrebovaniu, vhodná do interiéru aj exteriéru.
• Matný povrch v kovovom dizajne s veľkými rozdielmi v odtieni, štruktúre a kresbe.
• Vhodná pre vysokopriepustné priestory ako hale hotelov, obchodov a garáže.

Objav podobné ako Dlažba Cir Metallo Rame 100x100 cm mat 1086616

Dlažba Cir Metallo Rame má rozmery 30x60 cm a hrúbku 9,5 mm s matným povrchom. Je reštifikovaná, mrazuvzdorná a vhodná do interiéru aj exteriéru. Vyznačuje sa veľkými rozdielmi v odtieni farieb, štruktúre povrchu a kresbe.

• Reštifikovaná a mrazuvzdorná, vhodná do exteriéru aj interiéru.
• Matný povrch s kovovým dizajnom a výraznými variáciami v odtieňoch a štruktúre.
• Vysoká odolnosť proti opotrebovaniu, vhodná do intenzívne využívaných priestorov ako hale, obchody alebo garáže.

Objav podobné ako Dlažba Cir Metallo Rame 30x60 cm mat 1086619

Zebra RAM Mount quick-release printer mount, fits for: ZQ630 series

Objav podobné ako Zebra RAM Mount Quick-Change Printer Mount

Zebra RAM-246U RAM Mount

Objav podobné ako Zebra RAM-246U RAM Mount

Zebra RAM-B-166U RAM Mount holder

Objav podobné ako Zebra RAM-B-166U RAM Mount holder

Zebra P1010338 RAM Mount

Objav podobné ako Zebra P1010338 RAM Mount

Zebra MT4510 RAM-Mount basis plate

Objav podobné ako Zebra MT4510 RAM-Mount basis plate

Zebra AK17463-002 RAM mount kit

Objav podobné ako Zebra AK17463-002 RAM mount kit

RAM mount, 12 rameno, vhodné pre: VC80, VH10.

Objav podobné ako Zebra MT4302 RAM mount, 12

MOUNT, XC6, RAM MONTÁŽNA SÚPRAVA NA VYSOKOZDVIŽNÝ VOZÍK

Objav podobné ako Zebra Ram-mount

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2HU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PD2HU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU:Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC ReaderAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25LU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2U:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PD2U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

Zebra P1050667-033 Handi Mount

Objav podobné ako Zebra P1050667-033 Handi Mount

Zebra 11-TM0077-04 Table mount

Objav podobné ako Zebra 11-TM0077-04 Table mount

Zebra BRKT-MM0093C-04 desk mount, black

Objav podobné ako Zebra BRKT-MM0093C-04 desk mount, black

Zebra BRKT-LM0093C-04 locking mount, black

Objav podobné ako Zebra BRKT-LM0093C-04 locking mount, black

Zebra BRKT-MM0093C-0W desk mount, white

Objav podobné ako Zebra BRKT-MM0093C-0W desk mount, white

Zebra MNT-MC93-FLCH-01 forklift mount

Objav podobné ako Zebra MNT-MC93-FLCH-01 forklift mount

Zebra 21-118517-01R Wall mount, kit

Objav podobné ako Zebra 21-118517-01R Wall mount, kit

Zebra KT-152097-03 wall mount, kit

Objav podobné ako Zebra KT-152097-03 wall mount, kit

Zebra MT4205 Quick Release Mount

Objav podobné ako Zebra MT4205 Quick Release Mount