Accessories cms-p1-preplates 5145135 phoenix contact

50 prepare pen plates for the pen station of the P1 plotter (conrad.sk)

Accessories (conrad.sk)

4 replacement seals for the pen station of the P1 plotter and 10 prepare pen plates (conrad.sk)

Plastic magazine for CMS-P1 plotter. For accommodating 1 GPE lable sheet (conrad.sk)

Plastic magazine for CMS-P1 plotter. Accepts 22 Zack band strips (conrad.sk)

Plastic magazine for CMS-P1 plotter. Accepts 26 flat Zack strip or ZB strips (conrad.sk)

Plastic magazine for CMS-P1 plotter. Accepts 4 up to 6 PABA marker bars (conrad.sk)

Marker pen, incl. adapter, ink tank and reservoir, 0.35 mm nib (conrad.sk)

Marker pen, incl. adapter, ink tank and reservoir, 0.5 mm nib (conrad.sk)

Marker pen, incl. adapter, ink tank and reservoir, 0.25 mm nib (conrad.sk)

Ink cartridge, special black ink, 5 cartridges of 1 ml each, for high demands (conrad.sk)

Cleaning fluid, 30 ml cleaning fluid for CMS-INK-TR-C5 (conrad.sk)

Fully hard metal chisel, 1 cutting edge, cutting width: 0.3 mm (conrad.sk)

Cleaning cartridges with spare sealing caps, 2 cartridges with 10 ml each with sealing caps for CMS-PEN... (conrad.sk)

Fully hard metal chisel, 1 cutting edge, cutting width: 0.1 mm (conrad.sk)

Marker pen, Color: black (conrad.sk)

Fully hard metal chisel, 1 cutting edge, cutting width: 0.5 mm (conrad.sk)

Fully hard metal milling cutter, 2 cutting edges, milling width: 2.0 mm (conrad.sk)

Pair of guide rails, reinforced design with engagement catch, 100 mm high, the mounting hole has a diameter of 3.1 mm (conrad.sk)

Bend protection sleeve (conrad.sk)

Locking latch, red insulating material, for housings MSTB 2.5/...ST and MSTBT 2.5/...ST (conrad.sk)

Accessories, Number of positions: 10, Pitch: 5.08 mm, Color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08 (conrad.sk)

Accessories, Number of positions: 5, Pitch: 5.08 mm, Color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08 (conrad.sk)

Accessories, Number of positions: 16, Pitch: 5.08 mm, Color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08 (conrad.sk)

Accessories, Number of positions: 6, Pitch: 5.08 mm, Color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08 (conrad.sk)

Accessories, Number of positions: 3, Pitch: 5.08 mm, Color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08 (conrad.sk)

Magazine, for CMS-P1-PLOTTER, for accommodating UC-WMC 7,5... (conrad.sk)

Engraving tool with a point angle of 15°, tip diameter of 0.4 mm (conrad.sk)

Magazine, for CMS-P1-PLOTTER, for accommodating UC-TM..., UC-TMN..., UC-WMC 3,1..., UC-WMTBA... (conrad.sk)

Magazine, for CMS-P1-PLOTTER, for accommodating UC-TMF..., UC1-TMF..., UC-WMT... (conrad.sk)

Engraving tool with a point angle of 15°, tip diameter of 0.5 mm (conrad.sk)

Magazine, for CMS-P1-PLOTTER, for accommodating UC-EMP..., UC-EMLP... (conrad.sk)

Engraving tool with a point angle of 15°, tip diameter of 0.3 mm (conrad.sk)

Module male contact, is inserted into the ICC connector shell after the conductor has been crimped, for conductors from 1.5-2.5 mm² (conrad.sk)

Side cover, for closing the housing for IP20 protection (conrad.sk)

Accessories (conrad.sk)

Replacement centering fork (bottom), for the crimping device CF 3000-2,5 (conrad.sk)

Replacement centering fork (top), for the crimping device CF 3000-2,5 (conrad.sk)

Module female contact, is inserted into the plug housing MSTBC after crimping the conductor, for conductors from 1.5 to 2.5 mm² (conrad.sk)

Module socket contact, is inserted into the plug housing MSTBC after crimping the conductor, for conductors from 0.2 to 0.5 mm² (conrad.sk)

Engraving tool set, tool with a point angle of 15°, tip diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.7 mm, 1.0 mm (conrad.sk)

Module socket contact, is inserted into the plug housing MSTBC after crimping the conductor, for conductors from 0.2 to 0.5 mm² (conrad.sk)

Wire stopper, for the stripping pliers QUICK WIREFOX 6 (conrad.sk)

Konektor zbernice HBUS 107.6 bez hlavičky kolíka. Tento text bol preložený strojovo. (conrad.sk)

Contact insert module, for sleeve frames, with screw connection, 8-pos., 160 V / 10 A (conrad.sk)

Contact insert module, for panel mounting frames, with 90° PCB connection, 8-pos., 160 V / 10 A (conrad.sk)

Shield connection for two shielded cables on female contact carriers, without loose crimp contacts (conrad.sk)

Shield connection for one shielded cable on male contact carriers, without loose crimp contacts (conrad.sk)

Contact insert module, for panel mounting frames, with 180° PCB connection, 8-pos., 160 V / 10 A (conrad.sk)

Shield connection for one shielded cable on female contact carriers, without loose crimp contacts (conrad.sk)