Emc cable catch rail kel-emv-f 3063523 phoenix contact

EMC cable catch rail (conrad.sk)

EMC cable catch rail (conrad.sk)

EMC cable catch rail (conrad.sk)

D-SUB EMC shroud, for panel mounting frame VS-09-..., shell size 1, shielded (conrad.sk)

HEAVYCON ADVANCE EMV sleeve housing B6, with bayonet locking, height 100 mm, with 1xM25 thread, lateral cable outlet (conrad.sk)

EMC half screw connection Pg21, for metal housings of sizes 2-4, consisting of rubber seal, iris spring, cone disks and pressure screw, for size 1 housings, cable shielding range [mm] 10.5 - 14.5, cable [mm] 14-18 (conrad.sk)

Shielded cable with a 9-pos. D-SUB female connector and one open end. The individual wires are labeled 1 to 9 and fitted with ferrules. The braided shield is routed to a separate cable end. Cable length: 1 m. (conrad.sk)

Shielded cable with a 37-pos. D-SUB female connector and one open end. The individual wires are labeled 1 to 37 and fitted with ferrules. The braided shield is routed to a separate cable end. Cable length: 2 m. (conrad.sk)

Shielded cable with a 15-pos. D-SUB female connector and one open end. The individual wires are labeled 1 to 15 and fitted with ferrules. The braided shield is routed to a separate cable end. Cable length: 2 m. (conrad.sk)

Shielded cable with a 25-pos. D-SUB female connector and one open end. The individual wires are labeled 1 to 25 and fitted with ferrules. The braided shield is routed to a separate cable end. Cable length: 1 m. (conrad.sk)

Shielded cable with a 9-pos. D-SUB female connector and one open end. The individual wires are labeled 1 to 9 and fitted with ferrules. The braided shield is routed to a separate cable end. Cable length: 2 m. (conrad.sk)

HEAVYCON EMC plug-in connector, pin version, 4-pos., for connecting shielded conductors with 3 - 9.5 mm external conductor diameter. For use in the HC-M-EMV-MOD-ST plastic module (conrad.sk)

HEAVYCON EMC plug-in connector, socket version, 4-pos., for connecting shielded conductors with 3 - 9.5 mm external conductor diameter. For use in the HC-M-EMV-MOD-BU plastic module (conrad.sk)

EMC shield adapter, for EMC plug-in connector, type 2, number of insert modules 3 (conrad.sk)

EMC shield adapter, for EMC plug-in connector, type 1, number of insert modules 2 (conrad.sk)

EMC shield adapter, for EMC plug-in connector, type 3, number of insert modules 4 (conrad.sk)

Slide nut, for DIN rail NS 35/15-AL, with M5 thread, for mounting equipment, material: Steel (conrad.sk)

EMC nut M12 is required for shield contacting on coated housing surfaces. (conrad.sk)

EMV nut M16 is required for shield contacting on coated housing surfaces. (conrad.sk)

Mounting frame, for one front plate or socket, metal frame, matt nickel-plated, electrically conductive, transparent cover (conrad.sk)

Universal DIN rail adapter for screwing on switchgear (conrad.sk)

Mains interference filter, with universal foot for mounting on NS 32 and NS 35/7.5, nominal current: 6 A (conrad.sk)

Adaptér V, aplikácia: adaptér štítu Tento text bol preložený strojovo. (conrad.sk)

Double hinged carrier, for mounting two NS 35/7.5 DIN rails above each other. If the top DIN rail is used as a grounding busbar, an additional PE conductor connection must be established to the lower rail. They are delivered in pairs (conrad.sk)

EMC seal for HC-ALU panel mounting base (conrad.sk)

EMC seal for HC-ALU panel mounting base (conrad.sk)

EMC seal for HC-ALU panel mounting base (conrad.sk)

EMC seal for HC-ALU panel mounting base (conrad.sk)

DIN rail, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver (conrad.sk)

DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 755 mm (conrad.sk)

NS 35 DIN rail, according to customer specifications, perforated, height: 7,5 mm, width: 35 mm (conrad.sk)

DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m (conrad.sk)

NS 35 DIN rail, according to customer specifications, height: 15 mm, width: 35 mm (conrad.sk)

DIN rail 35 mm (NS 35) (conrad.sk)

DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 755 mm (conrad.sk)

Modular terminal block with radio interference suppression capacitor between clamping connector and DIN rail, separate ground connection, nominal voltage: 3.3 nF, for mounting on NS 35/7.5, terminal width: 6.2 mm, terminal height: 69 mm (conrad.sk)

DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm (conrad.sk)

Device surge protection filter to limit powerful surge voltages, mounting on NS 35. (conrad.sk)

Round cable assembled with a 50-pos. socket strip and an open end. On the open end, the wires are labeled with 1 to 50 and have ferrules, cable length: 3 m (conrad.sk)

Round cable assembled with a 20-pos. socket strip and an open end. On the open end, the wires are labeled with 1 to 20 and have ferrules, cable length: 1.5 m (conrad.sk)

Round cable assembled with a 20-pos. socket strip and an open end. On the open end, the wires are labeled with 1 to 20 and have ferrules, cable length: 2 m (conrad.sk)

Round cable assembled with a 14-pos. socket strip and an open end. On the open end, the wires are labeled with 1 to 14 and have ferrules, cable length: 1 m (conrad.sk)

Puzdro puzdra HEAVYCON ADVANCE B6, so skrutkovým zaistením (šesťhranný hrdlo) vyrobené z nehrdzavejúcej ocele, hliníka odolného voči morskej vode, výška 74 mm, so závitom 1x M25, bočným káblovým vývodom, bez povrchu; vodivé tesnenie (vlastnosti EMC) Tento text bol preložený strojovo. (conrad.sk)

Puzdro puzdra HEAVYCON ADVANCE, B10, so skrutkovým zámkom (šesťhranný hrdlo) z nehrdzavejúcej ocele, hliník odolný voči morskej vode, výška 74 mm, so závitom 1x M25, bočný káblový vývod, bez povrchu; vodivé tesnenie (vlastnosti EMC) Tento text bol preložený strojovo. (conrad.sk)

Puzdro puzdra HEAVYCON ADVANCE, B10, so skrutkovým zámkom (šesťhranný hrdlo) z nehrdzavejúcej ocele, hliník odolný voči morskej vode, výška 74 mm, so závitom 1x M20, priamy káblový vývod, bez povrchu; vodivé tesnenie (vlastnosti EMC) Tento text bol preložený strojovo. (conrad.sk)

Puzdro puzdra HEAVYCON ADVANCE, B16, so skrutkovým zámkom (šesťhranný hrdlo) z nehrdzavejúcej ocele, hliník odolný voči morskej vode, výška 74 mm, so závitom, 1x M25, priamy káblový vývod, bez povrchu, vodivé tesnenie (vlastnosti EMC) Tento text bol preložený strojovo. (conrad.sk)

Puzdro puzdra HEAVYCON ADVANCE, B6, so skrutkovým zaistením (šesťhranný hrdlo) z nehrdzavejúcej ocele, hliník odolný voči morskej vode, výška 74 mm, so závitom 1x M25, priamy káblový vývod, bez povrchu, vodivé tesnenie (vlastnosti EMC) Tento text bol preložený strojovo. (conrad.sk)

Puzdro puzdra HEAVYCON ADVANCE, B24, so skrutkovým zámkom (šesťhranný hrdlo) z nehrdzavejúcej ocele, hliník odolný voči morskej vode, výška 93,7 mm, so závitom, 1x M25, priamy káblový vývod, bez povrchu, vodivé tesnenie (vlastnosti EMC) Tento text bol preložený strojovo. (conrad.sk)

Puzdro puzdra HEAVYCON ADVANCE, B24, so skrutkovým zaistením (šesťhranný hrdlo) z nehrdzavejúcej ocele, hliník odolný voči morskej vode, výška 74 mm, so závitom, 1x M25, priamy káblový vývod, bez povrchu, vodivé tesnenie (vlastnosti EMC) Tento text bol preložený strojovo. (conrad.sk)

Puzdro puzdra HEAVYCON ADVANCE, B16, so skrutkovým zaistením (šesťhranný hrdlo) z nehrdzavejúcej ocele, hliník odolný voči morskej vode, výška 74 mm, so závitom, 1x M25, bočný káblový vývod, bez povrchu, vodivé tesnenie (vlastnosti EMC) Tento text bol preložený strojovo. (conrad.sk)