Tool unifox-rvt p 6 1212509 phoenix contact

Rivet setting tool, for use with RVT-PA 6 plastic body-bound rivets (conrad.sk)

Rivet setting tool, for use with RVT-PA 4 plastic body-bound rivets (conrad.sk)

Water pump pliers, with groove joint, grip areas with dual notching, acc. to VDE ISO 8976 (conrad.sk)

Round-nose pliers, finely notched grip area, VDE 1000 V AC/1500 V DC tested (conrad.sk)

Flat-nose pliers, finely notched grip area, VDE 1000 V AC/1500 V DC tested (conrad.sk)

Needle-nose pliers with blade, angled 45°, notched grip area, VDE 1000 V AC/1500 V DC tested (conrad.sk)

Plastový rozpínací nit, pre priemer otvoru 6 mm a hrúbku materiálu 1,5 ... 6 MM Tento text bol preložený strojovo. (conrad.sk)

Needle-nose pliers, angled design, with opening spring and locking device, finely notched grip area, stripping possible for 1.5 mm² and 2.5 mm², integrated M8 - M10 ring wrench, VDE 1000 V AC/1500 V DC tested (conrad.sk)

Stripping tool, for 2.5 - 6 mm² solar cables, 8.5 mm stripping length, for MC3, MC4 and SOLARLOK contacts (conrad.sk)

Stripping tool, for standard 2.5, 4, and 6 mm² solar cables, with 15 mm length stop, for SUNCLIX field connectors (conrad.sk)

Plastic body-bound rivet, for hole diameter of 4 mm and a material thickness of 1.5 ... 6 mm (conrad.sk)

Tool bag, with document and laptop compartment, empty (conrad.sk)

Tool bag, empty (conrad.sk)

Toolbag case, equipped with: ferrule crimping pliers, stripping pliers, insulation stripper, cable cutterScrewdriver bladed: 0.6x3.5, 50 pcs. 5-pos. junction box connectors up to 2.5 mm²Tape measure, tool compartment (conrad.sk)

Odomykací nástroj, pre sústružené a valcované kontakty CK- 1,6 -... Tento text bol preložený strojovo. (conrad.sk)

Tool set, equipped (conrad.sk)

Set for stripping, crimping and screwing, equipped (conrad.sk)

Universal terminal block with bolt connection, with test socket screws and disconnect slide, cross section: 0.1 - 6 mm², width: 11 mm, color: Gray (conrad.sk)

Universal terminal block with bolt connection, with test socket screws, cross section: 0.1 - 6 mm², width: 11 mm, color: Gray (conrad.sk)

Stripping tool, for conductors and cables of 0 to 11 mm diameter (conrad.sk)

Polyamide Europe terminal strip, transparent, with wire protection, for connecting solid conductors and stranded conductors with and without ferrules with a cross section of 1 to 6 mm² (conrad.sk)

Test disconnect terminal block, Connection method: Screw connection, Cross section: 0.2 mm² -10 mm² , AWG: 24 - 8, Width: 8.2 mm, Mounting type: NS 35/7,5, NS 35/15, NS 32, Color: gray (conrad.sk)

Connector pliers, simplify removing the isolating connector from a closed row of terminal blocks (if installed individually) (conrad.sk)

Control cabinet keys made of metal for all the usual closures: Two-way key bit 3-5 mm, square 5,6,7-8,9-10 mm, triangle 7,8-9,10-11 mm, special 6 mm (conrad.sk)

Assortment box, metal, supplied with ferrules acc. to DIN 46228-4, 300 pces. AI 10-12 RD, 200 pcs. AI 16-12 BU, 100 pces. AI 25-16 YE, and KAMES 2 stripping knife, crimping pliers CRIMPFOX 25 (conrad.sk)

Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade (conrad.sk)

Stripping tool, for cables and conductors from 4 - 16 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade (conrad.sk)

Stripping tool, for cables and conductors (especially for rubber and silicone insulations) from 0.1 - 4 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade (conrad.sk)

Stripping tool, for conductors and cables with a conductor cross section from 0.08 to 2.5 mm, self-adjusting, stripping length adjustable up to 15 mm, cutting capacity up to 6 mm² stranded/1.5 mm² solid (conrad.sk)

One-hand bridge cutter, for fixed bridges FBI 10-6, FBI 10-8, FBI 10-10, FBI 10-12 (conrad.sk)

Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length (conrad.sk)

Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade (conrad.sk)

Cable duct cutter, for cutting plastic cable ducts, covers, and profiles, 45° limit stop also for bevel cuts, 75 mm cutting length (conrad.sk)

Connector hood, For use in Sensor/actuator box, Connection method: M12-SPEEDCON-socket Plastic, Number of slots: 6, Slot assignment: Single, Status indication: No; Master cable connection: Pluggable screw connection 180°, Cable length: 10 m, Shielding: No (conrad.sk)

Sensor/actuator box, Connection method: M12-SPEEDCON-socket Plastic, Number of slots: 6, Number of positions: 4, Slot assignment: Single, Status indication: Yes, pnp; Master cable connection: Fixed connection 180°, PUR/PVC, Cable length: 5 m, Shielding: No (conrad.sk)

Engraving tool with a point angle of 15°, tip diameter of 0.4 mm (conrad.sk)

Stripping tool, for stripping lines of Ø 8 - 28 mm (conrad.sk)

Cutting machine, for cables, litz wires, and shrink sleeves, 230 V mains voltage (conrad.sk)

Screwdriver range, consisting of the three small screwdrivers: SZS 1.0 x 4.0, SZS 1.0 x 6.5, SZG 0.9 x 6.5 (conrad.sk)

Nut for assembling SACC M8 connectors for free assembly with longitudinal knurl, excluding M8 connectors with QUICKON fast connection technology, for 4 mm hexagonal drive (conrad.sk)

Nut for assembling sensor/actuator cables with M8 connector and for M8 connectors with QUICKON fast connection technology, for 4 mm hexagonal drive (conrad.sk)

Stripping tool, for stripping installation lines of Ø 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping 0.2 mm² - 4 mm² , with longitudinal cut blade and sliding knife (conrad.sk)

Stripping tool, for stripping lines (specially for fiber optics lines) of Ø 4 - 16 mm (conrad.sk)

Pneumatic crimping pliers, for ferrules in accordance with DIN 46228-1: 1992-08 and DIN 46228-4: 1990-09, for conductor cross section 0.25 - 2.5 mm² (conrad.sk)

Two-hand ring cable cutter, with ratchet function, for copper and aluminum up to 52 mm diameter (up to 300 mm²) (conrad.sk)

Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm (conrad.sk)

Engraving tool with a point angle of 15°, tip diameter of 0.5 mm (conrad.sk)

Two-hand ring cable cutter, with ratchet function, for copper and aluminum up to 62 mm diameter (up to 750 mm²) (conrad.sk)

Toolbag belt, equipped with: cable cutter, diagonal cutter, stripping tool, combination pliers, control cabinet key, screwdriver, slit: 0.5 x3.0/1.0 x 4.0/1.0 x 5.5 crosshead: PH1/PH2, voltage tester, cutting knife, 3 m tape measure (conrad.sk)

Stripping pliers, for removing jackets from cables for cable cutouts, cable tap-offs, and shield connections with a diameter of 8 - 9 mm diameter, insulation thickness of up to 1.2 mm, stripping lengths of 20 mm and above (conrad.sk)