datalogic 4 slot charging and communication cradle

4-Slot Charging and Communication Cradle, Ethernet, order separately: Power Supply and Power Cord, for devices without rubber boot adapter is required, fits for: Memor 12, 17

Objav podobné ako Datalogic 4-Slot Charging and Communication Cradle

Single Slot Charging and Communication Cradle, ShareCradle, poskytuje USB komunikáciu, nabíja RFID-Reader a TC53/TC58, vhodné pre: RFD40, RFD90

Objav podobné ako Zebra Single Slot Charging and Communication Cradle

4-Slot Charging and Communication Cradle, incl.: Power Supply, order separately: Power Cord (C13), interface: 2x Ethernet, fits for: CK65

Objav podobné ako Honeywell 4-Slot Charging and Communication Cradle

Polysan ANDRA L čierna vaňa bez panelu
čierna moderná vaňa Polysan ANDRA
systém ovládania Up and Down
sprchový žľab s roštom DOUBLE FIT AND GO
pravá asymetrická vaňa Polysan Andra
Polysan ANDRA asymetrická vaňa

Charging and Communication Cradle, inclusive Micro-USB Cable and EU-Adapter, fits for: RS36

Objav podobné ako CipherLab Charging and Communication Cradle

Charge and Communication Cradle Cup for TC22R, fits for: Multi-Slot Cradle

Objav podobné ako Zebra CRDCUP-TC2R2E-01 Charge and Communication Cradle Cup

Datalogic Single Slot Nabíjacia Stanica, len na nabíjanie, vyžaduje: USB-C kábel/94ACC0327 Napájací Adaptér do Steny/94ACC0383, na nabíjanie bez gumového manžety potrebujete Adaptér pre kolísky/94ACC0395, vhodné pre: Memor 12-17 Memor 30-35.

Objav podobné ako Datalogic Single Slot Charging Dock

Datalogic BC9030-BT charging/transmitter cradle

Objav podobné ako Datalogic BC9030-BT charging/transmitter cradle

Datalogic BC9130-BT charging/transmitter cradle

Objav podobné ako Datalogic BC9130-BT charging/transmitter cradle

Datalogic BC9180-BT charging/transmitter cradle

Objav podobné ako Datalogic BC9180-BT charging/transmitter cradle

4-Slot Charging Cradle with 4-Slot Battery Charger, EU-Adapter, fits for: RS36

Objav podobné ako CipherLab 4-Slot Charging Cradle

Single Slot Dock, nabíjanie a komunikácia, rozhrania: USB-C, Ethernet, nabíja až jedno zariadenie a náhradnú batériu, objednáva sa samostatne: napájací zdroj a napájací kábel, vhodné pre: Memor 12/17

Objav podobné ako Datalogic Single Slot Dock, Charge and Communication

4-Slot Charging Cradle, incl. Power Supply and Power Cord (EU), fits for: RS38-HC

Objav podobné ako CipherLab 4-Slot Charging Cradle, EU, Healthcare

4-Slot Charging Cradle, for devices with rugged boot, order separately: power cord, fits for: CK67

Objav podobné ako Honeywell CK67-CB-UVB-0 4-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37 (non-booted)

Objav podobné ako Honeywell CT37-5CB-UVN-BAT-0 5-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37-HC (non-booted)

Objav podobné ako Honeywell CT37-5CB-UVN-HC0 5-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37-HC (booted)

Objav podobné ako Honeywell CT37-5CB-UVB-HC0 5-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37 (booted)

Objav podobné ako Honeywell CT37-5CB-UVB-BAT-0 5-Slot Charging Cradle

Single Slot Charging Cradle, incl.: spacer for devices without rugged boot, power supply and power cord (NA, UK, EU), fits for: Elo Pay M100

Objav podobné ako Elo 4-Slot Charging Cradle

4-Slot Charging Cradle, incl.: spacer for devices without rugged boot, power supply and power cord (NA, UK, EU), fits for: Elo Pay M100

Objav podobné ako Elo 4-Slot Charging Cradle

4-Slot Charging Cradle, 24V, 5A, 120W, incl.: power supply, power cord (NA, EU, UK), fits for: M51

Objav podobné ako Elo 4-Slot Charging Cradle

5-Slot Charging Cradle, incl.: Power Supply and Power Cord (UK), fits for: RS38

Objav podobné ako CipherLab 5-Slot Charging Cradle, UK

4-Slot Charging Cradle, fits for: TC22R

Objav podobné ako Zebra CRD-TC2R-BS4CG-01 4-Slot Charging Cradle

5-Slot Charging Cradle, charges up to 4x Devices and 4x spare batteries, incl.: power supply, order separately: power cord (C5), fits for: CK67 (with or without rugged boot)

Objav podobné ako Honeywell 5-Slot Charging Cradle

Single Slot Wireless Charging Dock, order separately: power supply and power cord, fits for: Memor 30, 35

Objav podobné ako Datalogic Single Slot Wireless Charging Dock

4-Slot Wireless Charging Dock, order separately: Power Cord (C13) , Power Supply and adapter (4x each cradle), fits for: Memor 17

Objav podobné ako Datalogic 4-Slot Wireless Charging Dock

4-Slot Wireless Charging Dock, color: white, Healthcare, fits for: Memor 17-HC

Objav podobné ako Datalogic 4-Slot Wireless Charging Dock, White, HC

4-Slot Wireless Charging Dock, order separately: Power Supply and Power Cord, fits for: Memor 30, 35

Objav podobné ako Datalogic 4-Slot Wireless Charging Dock

1-Slot Device Communication Cradle, podpora pre TC22/27, HC20/50, objednáva sa samostatne: Napájací zdroj, AC- a DC-kábel, vhodné pre: RFD40

Objav podobné ako Zebra Communication Cradle

Datalogic 94ACC0192 baterie charging station, 4 slots

Objav podobné ako Datalogic 94ACC0192 baterie charging station, 4 slots

Datalogic 94A150097 auto charging station

Objav podobné ako Datalogic 94A150097 auto charging station

Datalogic 94ACC0246 battery charging station, 4 slots

Objav podobné ako Datalogic 94ACC0246 battery charging station, 4 slots

Datalogic 94A150105 vehicle charging station

Objav podobné ako Datalogic 94A150105 vehicle charging station

Datalogic CHR-P090 charging station

Objav podobné ako Datalogic CHR-P090 charging station

Datalogic 94ACC0274 battery charging station, 4 slots

Objav podobné ako Datalogic 94ACC0274 battery charging station, 4 slots

Cradle Adapter, pack of 1, adapter is required to use devices without protective boot in a 4-Slot charging cradle, fits for: Memor 12, 17

Objav podobné ako Datalogic Cradle Adapter, pack of 1

Datalogic Single Slot Dock, order separately: Power supply 94ACC0383 or 94ACC0390 and USB Type-C cable 94A050044, fits for: Memor K20-K25

Objav podobné ako Datalogic Single Slot Dock

Multi-Slot Charging ShareCradle, nabíja RFD40 samostatne, TC22/TC27 alebo HC20/HC50 nabíjanie samostatne, oboje RFD40 a TC22/TC27 alebo HC20/HC50, keď sú pripojené spolu, nabíja až 4 náhradné batérie RFD40

Objav podobné ako Zebra Multi-Slot Charging ShareCradle

Multi-Slot Charging ShareCradle, nabíja až tri zariadenia RFD40 a TC5X a štyri náhradné batérie RFD40, objednáva sa samostatne: Napájací zdroj, AC a DC-kábel, vhodné pre: RFD40, TC51, TC52, TC56, TC57

Objav podobné ako Zebra Multi-Slot Charging ShareCradle

4-Slot Charging Base, requires: protective boot, incl.: power supply, order separately: power cord, fits for: CT32 (with rugged boot)

Objav podobné ako Honeywell 4-Slot Charging Base

Single Slot Charging ShareCradle, nabíja obe zariadenia: RFD40 + TC5X, vhodné pre: RFD40, TC51, TC52, TC52x, TC52ax, TC56, TC57x

Objav podobné ako Zebra CR40-1S0T-TC5-G-01, Charging Cradle

Single Slot Dock, iba nabíjanie, objednáva sa samostatne: USB-C kábel, napájací adaptér, vhodné pre: Memor 30/35

Objav podobné ako Datalogic Single Slot Dock

Singe Slot Dock, nabíja jedno zariadenie a jednu náhradnú batériu, objednáva sa samostatne: Napájací zdroj a Napájací kábel, vhodné pre: Memor 30/35

Objav podobné ako Datalogic Single Slot Dock

5-slot charging station for charging up to four CK62 devices and four CK62 batteries (CK67-BTSC-001), the kit includes a universal docking station with 5 slots, four CK62 universal charging cradles (CK62-UCP-N) and a quad battery cradle (CK6X-UCBC-4B), as well as a power supply unit, fits for: CK62

Objav podobné ako 5 Bay Charging Base

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CD2U: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per port) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 362 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLL-U1CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CDU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 322 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLL-U1CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CP-CU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5 - 12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 317 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLL-U1CP-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CPU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 322 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLL-U1CPU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CD2U: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per port) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 362 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLR-U1CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Rechts) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CDU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 322 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLR-U1CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CP-CU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5 - 12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 317 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLR-U1CP-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C