honeywell 4 slot charging and communication cradle

4-Slot Charging and Communication Cradle, incl.: Power Supply, order separately: Power Cord (C13), interface: 2x Ethernet, fits for: CK65

Objav podobné ako Honeywell 4-Slot Charging and Communication Cradle

4-Slot Charging and Communication Cradle, Ethernet, order separately: Power Supply and Power Cord, for devices without rubber boot adapter is required, fits for: Memor 12, 17

Objav podobné ako Datalogic 4-Slot Charging and Communication Cradle

Single Slot Charging and Communication Cradle, ShareCradle, poskytuje USB komunikáciu, nabíja RFID-Reader a TC53/TC58, vhodné pre: RFD40, RFD90

Objav podobné ako Zebra Single Slot Charging and Communication Cradle

Honeywell Lyric T6R pre Smart Home
digitálny termostat Honeywell DT4
Honeywell DT4 termostat
pravá orientácia vane Polysan ANDRA R SLIM
Polysan ANDRA R SLIM pravá 78771S
Polysan Andra vaňa 170x90 objem 258 litrov
Polysan Andra 81111 asymetrická vaňa
Polysan ANDRA L čierna vaňa bez panelu

Charging and Communication Cradle, inclusive Micro-USB Cable and EU-Adapter, fits for: RS36

Objav podobné ako CipherLab Charging and Communication Cradle

5-Slot Charging Cradle, charges up to 4x Devices and 4x spare batteries, incl.: power supply, order separately: power cord (C5), fits for: CK67 (with or without rugged boot)

Objav podobné ako Honeywell 5-Slot Charging Cradle

Charge and Communication Cradle Cup for TC22R, fits for: Multi-Slot Cradle

Objav podobné ako Zebra CRDCUP-TC2R2E-01 Charge and Communication Cradle Cup

4-Slot Charging Base, requires: protective boot, incl.: power supply, order separately: power cord, fits for: CT32 (with rugged boot)

Objav podobné ako Honeywell 4-Slot Charging Base

4-Slot Charging Cradle, for devices with rugged boot, order separately: power cord, fits for: CK67

Objav podobné ako Honeywell CK67-CB-UVB-0 4-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37 (non-booted)

Objav podobné ako Honeywell CT37-5CB-UVN-BAT-0 5-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37-HC (non-booted)

Objav podobné ako Honeywell CT37-5CB-UVN-HC0 5-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37-HC (booted)

Objav podobné ako Honeywell CT37-5CB-UVB-HC0 5-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37 (booted)

Objav podobné ako Honeywell CT37-5CB-UVB-BAT-0 5-Slot Charging Cradle

5-Slot Device Charging Cradle, incl.: Power Supply and Power Cord (EU), order separately: Protective Boot, fits for: CT37, CT30 XP

Objav podobné ako Honeywell 5-Slot Device Charging Cradle, EU

Honeywell MB1-SCN10, charging-/communication snap on

Objav podobné ako Honeywell MB1-SCN10, charging-/communication snap on

4-Slot Charging Cradle with 4-Slot Battery Charger, EU-Adapter, fits for: RS36

Objav podobné ako CipherLab 4-Slot Charging Cradle

4-Slot Charging Cradle, incl. Power Supply and Power Cord (EU), fits for: RS38-HC

Objav podobné ako CipherLab 4-Slot Charging Cradle, EU, Healthcare

Single Slot Charging Cradle, incl.: spacer for devices without rugged boot, power supply and power cord (NA, UK, EU), fits for: Elo Pay M100

Objav podobné ako Elo 4-Slot Charging Cradle

4-Slot Charging Cradle, incl.: spacer for devices without rugged boot, power supply and power cord (NA, UK, EU), fits for: Elo Pay M100

Objav podobné ako Elo 4-Slot Charging Cradle

4-Slot Charging Cradle, 24V, 5A, 120W, incl.: power supply, power cord (NA, EU, UK), fits for: M51

Objav podobné ako Elo 4-Slot Charging Cradle

5-Slot Charging Cradle, incl.: Power Supply and Power Cord (UK), fits for: RS38

Objav podobné ako CipherLab 5-Slot Charging Cradle, UK

4-Slot Charging Cradle, fits for: TC22R

Objav podobné ako Zebra CRD-TC2R-BS4CG-01 4-Slot Charging Cradle

4-Slot Device Charging Base, charges up to 4x non-booted devices, incl.: Power Supply, order separately: Power Cord, fits for: CT32

Objav podobné ako Honeywell 4-Slot Device Charging Base

1-Slot Device Communication Cradle, podpora pre TC22/27, HC20/50, objednáva sa samostatne: Napájací zdroj, AC- a DC-kábel, vhodné pre: RFD40

Objav podobné ako Zebra Communication Cradle

Single Slot Dock, nabíjanie a komunikácia, rozhrania: USB-C, Ethernet, nabíja až jedno zariadenie a náhradnú batériu, objednáva sa samostatne: napájací zdroj a napájací kábel, vhodné pre: Memor 12/17

Objav podobné ako Datalogic Single Slot Dock, Charge and Communication

Multi-Slot Charging ShareCradle, nabíja RFD40 samostatne, TC22/TC27 alebo HC20/HC50 nabíjanie samostatne, oboje RFD40 a TC22/TC27 alebo HC20/HC50, keď sú pripojené spolu, nabíja až 4 náhradné batérie RFD40

Objav podobné ako Zebra Multi-Slot Charging ShareCradle

Multi-Slot Charging ShareCradle, nabíja až tri zariadenia RFD40 a TC5X a štyri náhradné batérie RFD40, objednáva sa samostatne: Napájací zdroj, AC a DC-kábel, vhodné pre: RFD40, TC51, TC52, TC56, TC57

Objav podobné ako Zebra Multi-Slot Charging ShareCradle

Single Slot Charging ShareCradle, nabíja obe zariadenia: RFD40 + TC5X, vhodné pre: RFD40, TC51, TC52, TC52x, TC52ax, TC56, TC57x

Objav podobné ako Zebra CR40-1S0T-TC5-G-01, Charging Cradle

Single Cradle Charger, incl.: USB-C cable, order separately: Power Supply, compatible with scan handle, fits for: CT32 (non-booted)

Objav podobné ako Honeywell CT32-SC-UVN-0 Single Cradle Charger

Datalogic Single Slot Nabíjacia Stanica, len na nabíjanie, vyžaduje: USB-C kábel/94ACC0327 Napájací Adaptér do Steny/94ACC0383, na nabíjanie bez gumového manžety potrebujete Adaptér pre kolísky/94ACC0395, vhodné pre: Memor 12-17 Memor 30-35.

Objav podobné ako Datalogic Single Slot Charging Dock

EU kit, 4-slot nabíjačka batérií, vrátane.: napájací zdroj a napájací kábel

Objav podobné ako Honeywell 4-slot battery charger COMMON-QC-2, EU

Termostat Honeywell T3 umožňuje Wi-Fi pripojenie na internet a je kompatibilný s Apple HomeKit. Cez mobilnú aplikáciu Honeywell Home možno diaľkovo kontrolovať stav, meniť časový program vykurovania a využívať geofencing. Je vhodný pre inteligentné domácnosti.

• Wi-Fi pripojenie na internet pre vzdialený prístup
• Kompatibilita s Apple HomeKit a Smart Home systémami
• Geofencing na automatické úpravy teploty podľa polohy
• Jednoduchá kontrola a úprava cez mobilnú aplikáciu

Objav podobné ako Honeywell T3 termostat lyric t6 inteligentný digitálny s wifi Y6H810WF1034

Cradle Adapter, pack of 1, adapter is required to use devices without protective boot in a 4-Slot charging cradle, fits for: Memor 12, 17

Objav podobné ako Datalogic Cradle Adapter, pack of 1

5-slot charging station for charging up to four CK62 devices and four CK62 batteries (CK67-BTSC-001), the kit includes a universal docking station with 5 slots, four CK62 universal charging cradles (CK62-UCP-N) and a quad battery cradle (CK6X-UCBC-4B), as well as a power supply unit, fits for: CK62

Objav podobné ako 5 Bay Charging Base

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CD2U: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per port) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 362 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLL-U1CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CDU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 322 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLL-U1CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CP-CU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5 - 12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 317 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLL-U1CP-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CPU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 322 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLL-U1CPU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CD2U: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per port) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 362 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLR-U1CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Rechts) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CDU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 322 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLR-U1CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CP-CU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5 - 12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 317 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLR-U1CP-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CD2U: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 8,02 cm Overall Height: 21,44 cm Overall Depth: 7,70 cm Weight: ca. 223 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-U1CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CP-CU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5 - 12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 8,02 cm Overall Height: 21,44 cm Overall Depth: 7,70 cm Weight: ca. 223 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-U1CP-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Rechts) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CPU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product dimensions: Overall Width: 10.85 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 322 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLR-U1CPU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CDU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Easy insertion and removal Charging function data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 8,02 cm Overall Height: 21,44 cm Overall Depth: 7,70 cm Weight: ca. 223 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-U1CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CPU: Only compatible with IntelliSkin Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product dimensions: Overall Width: 8,02 cm Overall Height: 21,44 cm Overall Depth: 7,70 cm Weight: ca. 223 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-U1CPU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

Termostat Honeywell Lyric T6R je bezdrôtový digitálny termostat s Wi-Fi pripojením. Umožňuje vzdialené ovládanie a programovanie vykurovania cez mobilnú aplikáciu Honeywell Home. Podporuje funkcie ako geofencing a je kompatibilný s Apple HomeKit a Smart Home systémami.

• Wi-Fi pripojenie pre vzdialený prístup a ovládanie
• Kompatibilita s Apple HomeKit a Smart Home systémami
• Geofencing – automatická regulácia teploty podľa polohy
• Jednoduchá inštalácia a nastavenie cez mobilnú aplikáciu

Objav podobné ako Termostat Honeywell Lyric T6R inteligentný digitálny bezdrôtový s WIFI Y6H910RW4055

Digitálny izbový termostat Honeywell DT4 (DT40WT20) je určený na reguláciu teploty v domácnosti. Vyrába sa v bielom prevedení a vyžaduje drôtové pripojenie. Umožňuje presné nastavenie a úsporu energie.

• Digitálne programovanie teploty
• Jednoduchá inštalácia s drôtovým pripojením
• Moderný biely dizajn
• Presná regulácia teploty v miestnosti

Objav podobné ako Digitálny termostat drôtový Honeywell DT4, biely DT40WT20

16-slot charging station for up to 16 CT70 standard batteries, wireless batteries, or extended batteriesScope of delivery: Charging station, power supplyOrder separately: Power cord

Objav podobné ako Charging Station, 16 slots

16-slot charging station for up to 16 CT70 standard batteries, wireless batteries, or extended batteriesScope of delivery: Charging station, power supply; power cord EU

Objav podobné ako Battery charging station, 16 slots

5-slot charging station for up to 4 CT70, with or without protective cover and 4 batteries.Scope of delivery: Charging station; holder with insert adapter; power supply unitOrder separately: Power cord

Objav podobné ako Charging station, 5 slots