honeywell ih21 epl ct40 ih21 adapter holder ct40

IH21 držiak, iba nabíjanie, ePop-Loq, vhodný pre: CT40.

Objav podobné ako Honeywell IH21-EPL-CT40 IH21 adapter holder, CT40

Honeywell IH21-EPL-EDA50 IH21 adapter holder, EDA50, EDA51

Objav podobné ako Honeywell IH21-EPL-EDA50 IH21 adapter holder, EDA50, EDA51

Nabíjacia stanica Honeywell CT40-QBC-2 je 4-slotové zariadenie určené na nabíjanie batérií typu CT40. Súčasťou balenia je napájací zdroj a napájací kábel s EU zástrčkou. Stanica poskytuje základnú funkciu nabíjania pre uvedený typ batérií.

• 4 samostatné nabíjacie sloty pre efektívne nabíjanie viacerých batérií naraz
• kompletná sada vrátane napájacieho zdroja a napájacieho kábla s EU zástrčkou
• špeciálne navrhnutá pre batérie Honeywell CT40
• jednoduchá a spoľahlivá konštrukcia pre každodenné použitie

Objav podobné ako Honeywell battery charging station CT40-QBC-2, 4 slots

EPL štítky odolné proti oderu
tlačiareň štítkov s podporou ZPL a EPL jazykov
tlačiareň štítkov s podporou ZPL a EPL
4-slotová nabíječka pre batérie CT40
nabíjanie batérií CT40-QBC-2
nabíjacia jednotka pre batérie CT40
montáž 2-otvorový AMPS pre CT40/45/47
napájací adaptér pre výrobky Sanela
tesa ekkro wc kefa adaptér bk20
adaptér bk20 pre wc držiak
predlžovací adaptér pre sprchovú hlavicu
tesa elegaant adaptér BK20
adaptér Hansa Electra 64490900
vstup 100-240 V adaptér
tesa smooz lepidlo adaptér BK20
batériový adaptér 4x AA napájanie

Nabíjacia stanica, 4 sloty, vrátane.: napájací zdroj, napájací kábel (EU), vhodný pre: CT40.

Objav podobné ako Honeywell charging station CT40-CB-UVN-2, 4 slots

Nabíjacia stanica, 4 sloty, vrátane.: napájací zdroj, napájací kábel (UK), vhodný pre: CT40.

Objav podobné ako Honeywell charging station CT40-CB-UVN-3, 4 slots

Nabíjacia stanica, 4 sloty, vrátane.: napájací zdroj, objednáva sa samostatne: napájací kábel, vhodný pre: CT40/XP, CT45/XP.

Objav podobné ako Honeywell charging station CT40-CB-UVN-0, 4 slot

External Media Holder, fits for: PC45

Objav podobné ako Honeywell 205-190-005 External Media Holder

Honeywell IH40-ADP-SLV, IH40 Adapter Sleeve

Objav podobné ako Honeywell IH40-ADP-SLV, IH40 Adapter Sleeve

Honeywell RT10-VM-POWER-CVRT, adapter cable

Objav podobné ako Honeywell RT10-VM-POWER-CVRT, adapter cable

Honeywell 852-073-001, USB Adapter

Objav podobné ako Honeywell 852-073-001, USB Adapter

Honeywell 225-781-001, Ribbon Adapter

Objav podobné ako Honeywell 225-781-001, Ribbon Adapter

CT40 booted homebase. Kit zahŕňa homebase, power supply a EÚ power cord. Pre recharging počítač s protective boot (CT40-PB-00 alebo CT40-PB-XP) attach and a spare battery. Support USB client via USB Type B connector.

Objav podobné ako CT40 booted homebase. Kit zahŕňa homebase, power supply a EÚ power cord.

Napájací adaptér, vhodný pre: PC23, PC42, PC43

Objav podobné ako Honeywell 203-186-201, Power Adapter

TSC DA210 je priama termálna tlačiareň štítkov s rozlíšením 203 dpi. Podporuje šírku média do 114 mm a dosahuje maximálnu rýchlosť tlače 152 mm/s. Tlačiareň je vybavená USB pripojením a podporuje viaceré jazyky tlače vrátane ZPL a EPL.

• Vysoká rýchlosť tlače až 152 mm/s
• Podpora viacerých jazykov tlače (EPL, ZPL, ZPLII, TSPL-EZ, DPL)
• Zabudované senzory Gap a Black Mark pre presnú detekciu štítkov
• Kompletná výbava vrátane softvéru na návrh štítkov

Objav podobné ako TSC DA210 99-158A001-0002, 8 dots/mm (203 dpi), EPL, ZPL, ZPLII, TSPL-EZ, USB, tlačiareň štítkov

TSC DA210 je priama termálna tlačiareň štítkov s rozlíšením 203 dpi a maximálnou šírkou potlačovania 108 mm. Podporuje viaceré programovacie jazyky a komunikáciu cez USB aj Bluetooth pre iOS. Je vhodná pre rýchle a spoľahlivé označovanie v priemyselných a obchodných podmienkach.

• Vysoká rýchlosť potlačovania až 152 mm/s pre efektívnu prácu.
• Univerzálna kompatibilita s viacerými programovacími jazykmi (EPL, ZPL, ZPLII, TSPL-EZ, DPL).
• Bezkontaktné tlačenie cez Bluetooth pre iOS zariadenia.
• Robustná konštrukcia s veľkým maximálnym priemerom kotúča 127 mm.

Objav podobné ako TSC DA210 99-158A005-0202, 8 dots/mm (203 dpi), EPL, ZPL, ZPLII, TSPL-EZ, USB, BT (iOS), tlačiareň štítkov

TSC DA310 je priama termálna tlačiareň štítkov s rozlíšením 300 dpi a maximálnou šírkou tlače 105 mm. Ponúka maximálnu rýchlosť tlače 102 mm/s a podporuje viaceré jazyky tlače vrátane ZPL a EPL. Súčasťou balenia je napájací zdroj, USB kábel, softvér na návrh štítkov a príručka.

• Vysoká kvalita potlače s rozlíšením 300 dpi
• Rýchla tlač až do 102 mm/s pre efektívnu prácu
• Podpora viacerých jazykov tlače (EPL, ZPL, ZPLII, TSPL-EZ, DPL)
• Kompletná výbava vrátane softvéru na návrh štítkov

Objav podobné ako TSC DA310 99-158A002-0002, 12 dots/mm (300 dpi), EPL, ZPL, ZPLII, TSPL-EZ, DPL, USB, tlačiareň štítkov

Poskytujeme servisné služby pre zariadenie Honeywell SVCEDA51-SG3N. Služba zahŕňa diagnostiku, opravu a údržbu zariadenia. Využívame originálne náhradné diely a poskytujeme záruku na prácu.

• Odborná diagnostika zariadenia
• Použitie originálnych náhradných dielov
• Rýchla a spoľahlivá oprava
• Garancia na vykonané servisné práce

Objav podobné ako Honeywell SVCEDA51-SG3N, service

Honeywell CK65 je robustný mobilný počítač postavený na platforme Mobility Edge s odolnosťou IP64 a odolnosťou voči pádu z výšky 3 metrov. Vybavený je výkonným procesorom Qualcomm Snapdragon, 4GB RAM, 32GB úložiskom a batériou s výdržou až 28 hodín. Ponúka pokročilý skener 1D/2D, jasný dotykový displej funkčný s rukavicami a pokročilé sieťové pripojenie.

• Odolnosť IP64 a pád z 3 metrov na betón
• Dlhý výkon batérie až 28 hodín
• Výkonný skener 1D/2D 6803FR FlexRange Slim
• Dotykový displej funkčný s rukavicami

Objav podobné ako Honeywell CK65 /ALNUM/4GB/6803/Cam

Sada rezačky Honeywell OPT78-2738-01 je určená pre tlačiarne rady M-Class. Umožňuje presné rezanie etikiet na požadovanú veľkosť. Ide o originálny výrobok od spoločnosti Honeywell.

• Kompatibilná s Honeywell M-Class tlačiareňami
• Presné a čisté rezanie etikiet
• Jednoduchá výmena a údržba
• Odolná konštrukcia pre dlhú životnosť

Objav podobné ako Honeywell OPT78-2738-01, Cutter

Honeywell Xenon 1960g - SR je priemyselný 1D/2D skener s rozlíšením senzora 1280x1080 pixelov. Zariadenie disponuje odolnosťou voči pádom a pracuje v teplotnom rozsahu 0-50°C. Podporuje viaceré rozhrania vrátane USB, klávesnicového wedge a RS-232.

• Vysoká odolnosť voči pádom z výšky 1,8 m na betón
• Rýchle skenovanie s toleranciou pohybu až 13 m/s
• Univerzálna podpora formátov (1D, 2D, PDF, OCR)
• Široké prevádzkové rozsahy teplôt a vlhkosti

Objav podobné ako Honeywell Xenon 1960g - SR, 1D/2D

Tlačiaca hlava Honeywell ENM533529 poskytuje rozlíšenie 8 bodov/mm (203 dpi) pre kvalitný tlač. Je určená ako náhradný diel pre kompatibilné tlačiarne Honeywell. Zaisťuje spoľahlivý výkon a dlhú životnosť.

• Vysoká rozlíšenie 203 dpi pre ostrý tlač
• Kompatibilita s vybranými Honeywell tlačiarnami
• Odolný dizajn pre dlhú životnosť
• Jednoduchá inštalácia a výmena

Objav podobné ako Honeywell ENM533529 tisková hlava, 8 dots/mm (203dpi)

Rezačka Honeywell 213-036-001 je automatické zariadenie určené na rezanie štítkov pre tlačiarňu Honeywell PD43. Využíva optický snímač na detekciu odobratia štítku, čo zabezpečuje presné a včasné rezanie. Ide o oficiálne príslušenstvo, ktoré zvyšuje efektivitu práce so štítkovacím systémom.

• Automatická rezačka s optickým snímačom odobratia štítku
• Kompatibilná s tlačiarňou štítkov Honeywell PD43
• Presné a rýchle rezanie štítkov
• Jednoduchá inštalácia a výmena

Objav podobné ako Honeywell 213-036-001, Cutter

Aktívny držiak Brodit je určený pre modely MC3400 a MC3450. Napája sa cez cigaretový zapalovač v aute a ponúka bezpečné uchytenie zariadenia. Je vhodný pre stabilné umiestnenie navigačných zariadení počas jazdy.

• Napájanie cez cigaretový zapalovač v aute
• Univerzálne uchytenie pre modely MC3400 a MC3450
• Bezpečné a stabilné držanie zariadenia
• Jednoduchá inštalácia a použitie

Objav podobné ako Brodit, active holder

Tlačová hlava Honeywell 50180238-001 je originálny náhradný diel s rozlíšením 406 dpi. Je určená pre štítkovacie tlačiarne Honeywell na tlač čiarových kódov a textu. Zaisťuje spoľahlivý výkon a kompatibilitu s pôvodným vybavením.

• Vysoké rozlíšenie 406 dpi (16 bodov/mm) pre ostrý tlač
• Originálny náhradný diel Honeywell so spoľahlivosťou OEM
• Kompatibilita s radom štítkovacích tlačiarní Honeywell
• Dlhšia životnosť a konzistentná kvalita potlačenej čiarového kódu

Objav podobné ako Honeywell print head 50180238-001, 16 dots/mm (406dpi)

Termotransferová páska Honeywell Intermec 1-970649-47-0 je vyrobená zo zmesi vosku a živice, čo zabezpečuje odolnú potlač. Šírka rolky je 154 mm s dĺžkou 420 metrov a vnútorným navíjaním na jadro 25,4 mm. Balenie obsahuje 10 roliek čiernej farby vhodných pre tlačiarne TMX 2010 a HP06.

• Vysoká kvalita potlače na rôznych povrchoch
• Dlhšia životnosť tlačových hláv
• Optimálna kompatibilita s tlačiareňami TMX 2010 a HP06
• Vhodné pre priemyselné a skladové prostredie

Objav podobné ako Honeywell Intermec 1-970649-47-0 thermal transfer ribbon, TMX 2010 / HP06 wax/resin, 154mm, 10 rolls/box, black

Termotransferová páska Honeywell TMX 2060/HP66 je vyrobená zo zmesi vosku a živice. Má šírku 165mm, dĺžku 450m a vnútorné navíjanie na jadro 25,4mm. Dodáva sa v balení 5 roliek čiernej farby.

• Vysoká kvalita potlače na rôznych povrchoch
• Dlhšia životnosť vďaka vosk/živica zloženiu
• Optimálna šírka 165mm pre bežné tlačiarne
• Balenie 5 roliek pre ekonomické nakupovanie

Objav podobné ako Honeywell Intermec 1-970646-60 thermal transfer ribbon, TMX 2060 / HP66 wax/resin, 165mm, 5 rolls/box, black

Termostat Honeywell T3 umožňuje Wi-Fi pripojenie na internet a je kompatibilný s Apple HomeKit. Cez mobilnú aplikáciu Honeywell Home možno diaľkovo kontrolovať stav, meniť časový program vykurovania a využívať geofencing. Je vhodný pre inteligentné domácnosti.

• Wi-Fi pripojenie na internet pre vzdialený prístup
• Kompatibilita s Apple HomeKit a Smart Home systémami
• Geofencing na automatické úpravy teploty podľa polohy
• Jednoduchá kontrola a úprava cez mobilnú aplikáciu

Objav podobné ako Honeywell T3 termostat lyric t6 inteligentný digitálny s wifi Y6H810WF1034

Tlačiaca hlava Honeywell PHD20-2241-01 poskytuje rozlíšenie 12 bodov/mm (300 DPI). Je určená pre vybrané modely tlačiarní Honeywell. Zaisťuje kvalitný tlač na štítky a iné materiály.

• Vysoké rozlíšenie 300 DPI pre ostrý tlač
• Kompatibilita s vybranými Honeywell tlačiarmi
• Odolnosť pre dlhú životnosť
• Jednoduchá výmena a inštalácia

Objav podobné ako Honeywell PHD20-2241-01 tisková hlava, 12 dots/mm (300 dpi)

Termotransferová páska Honeywell Intermec I90679-0 s označením TMX 3710/HR03 je živicová páska určená pre termotransferovú tlač. Rolka má šírku 60 mm, vnútorný priemer jadra 25,4 mm a dĺžku 300 metrov. Balenie obsahuje 10 roliek.

• Vysoká odolnosť proti treniu a chemikáliám
• Dokonalá kompatibilita s tlačiarmi TMX 3710
• Dlhšia životnosť vytlačených štítkov
• Konzistentná kvalita celej rolky

Objav podobné ako Honeywell Intermec I90679-0 thermal transfer ribbon, TMX 3710 / HR03 resin, 60mm, 10 rolls/box, black

Termotransferová páska Honeywell Intermec 1-130647-01-0 je živicový typ určený pre tlačiareň TMX 3710. Má šírku 110mm, dĺžku 220 metrov a je dodávaná v balení po 10 roliek. Páska využíva vnútorné navíjanie a poskytuje vysokú odolnosť potlačeného textu.

• Vysoká odolnosť proti treniu a chemikáliám
• Dokonalá kompatibilita s tlačiareňou TMX 3710
• Dlhšia životnosť vďaka HR03 živicovej vrstve
• Optimálna šírka 110mm pre štandardné štítky

Objav podobné ako Honeywell Intermec 1-130647-01-0 thermal transfer ribbon, TMX 3710 / HR03 resin, 110mm, 10 rolls/box, black

Tento ProClip adapter umožňuje montáž zariadenia Zebra Xcover Pro v Otterbox uniVERSE prípade na čítačku RFD40. Zabezpečuje komunikáciu cez eConnex alebo USB-C konektor. Ide o špecializovaný príslušenstvo pre profesionálne použitie.

• Umožňuje bezpečnú montáž Xcover Pro v Otterbox uniVERSE prípade na Zebra RFD40
• Komunikácia cez eConnex/USB-C konektor zabezpečuje spoľahlivé pripojenie
• Špeciálne navrhnutý pre profesionálne použitie v priemyselných podmienkach
• Jednoduchá inštalácia a kompatibilita s existujúcim hardvérom

Objav podobné ako Zebra 3PTY-PCLIP-216390 ProClip adapter, Xcover Pro, Otterbox uniVERSE case

Dell HBA355e je SAS adaptér s PCI-Express x8 rozhraním a štyrmi Mini-SAS konektormi. Poskytuje pripojenie pre až štyri externé SAS zariadenia s priepustnosťou 12Gbps. Karta je kompatibilná s radom serverov Dell PowerEdge a PowerVault úložiskových systémov.

• Podpora pre 4 externé SAS zariadenia s priepustnosťou 12Gbps
• Kompatibilita s širokým spektrom serverov Dell PowerEdge a PowerVault
• Možnosť inštalácie v low profile aj full height konfiguráciách
• Vysoká spoľahlivosť a stabilita pre kritické úlohy

Objav podobné ako Dell HBA355e SAS Adapter Low Profile/Full Height

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDHLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

Honeywell CT40-CIGR-0, vehicle adapter

Objav podobné ako Honeywell CT40-CIGR-0, vehicle adapter

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub-Anschluss

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: RoHS, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11U: Compatible with OEM hand strap Easy insertion and removal With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot

Honeywell IH25-BR-2 bracket, CT40

Objav podobné ako Honeywell IH25-BR-2 bracket, CT40

This RAM Mounts Form Fit (combo-locking) holder is suitable for the Honeywell RT10 Rugged Tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a hand strap or extended battery pack can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON9PD2CLU:Compatible with accessories e.g. hand strap or extended battery Easy insertion and removalCharging functionLockable with comboPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transferspeed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON9PD2CLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Combo-locking) for Honeywell RT10