ram mounts gds holder for zebra tc2x tc5x series in intelliskin protective sleeve usb c usb a connector

This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE2434CPDU holder is supplied.

Objav podobné ako RAM Mounts GDS Holder for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

RAM Mounts GDS Uni-Conn je pružinová dokovacia stanica navrhnutá pre zariadenia v IntelliSkin prípadoch s Uni-Conn adaptérom. Zabezpečuje bezpečné uchytenie a rýchle nabíjanie cez pogo piny s USB-C pripojením. Obsahuje aj USB-A port pre periférne zariadenia.

• Univerzálna dokovacia stanica s pružinovým mechanizmom pre rýchle a bezpečné uchytenie.
• Podpora rýchleho nabíjania cez integrované pogo piny s USB-C vstupom a výkonom 15W.
• Dodatočný USB-A port pre pripojenie periférneho zariadenia (napr. myš alebo klávesnica).
• Jednoduchá inštalácia a kompatibilita s IntelliSkin prípadmi a Uni-Conn adaptérom.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE16CPDU holder is supplied.

Objav podobné ako RAM Mounts GDS Holder for Zebra EC50 & EC55 in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

dokovacia stanica RAM Mounts Form-Fit pre Getac ZX10
RAM Mounts dokovacia stanica s VESA uchytením
univerzálna nabíjacia dokovacia stanica RAM Mounts
RAM Mounts nabíjacia stanica pre Honeywell RT10
upevnenie RAM Mounts pre Honeywell RT10
univerzálny držiak RAM Mounts do auta
RAM Mounts držiak s dvojitým otočným ramenom
stolík s USB a USB-C portami
RAM-GDS-DOCKL-SAM88CDU držiak s USB-C a USB-A konektorom
náhradný rám pre Zebra ET séria
nabíjacia stanica Zebra CRD1S0T-RFD40-TC2X-CHG-1R
RAM-GDS-DOCK-V12-U1CPDU
nabíjacia stanica Zebra CRD3S4T-RFD40-TC2X-CHG-1R
štítková tlačiareň USB a sériové rozhranie
walk-in sprchový kút SAT séria
Zebra tlačiareň s USB a Ethernetom

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-C port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C & USB-C (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V-12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CP-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPDHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Key locking Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock mit Schlüsselverriegelung - 2-Hole AMPS Pattern - USB-C Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Rechts) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDHU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Heated Pogo-Pins Lockable with key Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Holder (Key-Locking) for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - Heated Pogo-Pins - USB-C & USB-A Connector

Tento RAM Mounts GDS Tough-Dock držiak s kľúčovým zámkom je určený pre Samsung Tab A9+ v IntelliSkin Next Gen ochrannom obale. Držiak nabíja tablet cez USB-C konektor a poskytuje USB-A port pre pripojenie periférií. Spodná časť držiaka je prispôsobená na pripevnenie na guľovú základňu.

• Bezpečné pripevnenie tabletu pomocou kľúčového zámku
• Nabíjanie tabletu cez USB-C konektor s výkonom 15W
• Podpora periférnych zariadení cez USB-A port
• Jednoduchá inštalácia a vyberanie tabletu

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad 10 & 11 Gen. (A16) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP40-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP40-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad 10 & 11 Gen. (A16) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Air 11 (M2 & M3) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M2-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP45-M2-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Air 11 (M2 & M3) - GDS-Technology - External USB-C Connector

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2U: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC & USB-A Connector

The GDS Hand-Stand with Uni-Conn Adapter is a high-quality accessory for the Uni-Conn system that significantly improves tablet usability on flat surfaces.Designed for professional use in mobile environments, the Hand-Stand allows for stable positioning of the device, ensuring convenient and ergonomic operation.The Uni-Conn adapter is installed before inserting the tablet into the IntelliSkin protective sleeve.The result is a reliable and secure stand without compromising the mobility or protection of the device.Product features RAM Mounts RAM-GDS-U1HSKU:Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case seriesIncl. Uni-Conn AdapterEasy installationAdditional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as:Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+.Devices shown are not included in the delivery.Only the RAM-GDS-U1HSKU adapter is supplied.

Objav podobné ako RAM Mounts GDS Hand-Stand with Uni-Conn Adapter for IntelliSkin Next Gen Cases - Hard- and Thin-Case Series - Screw-Set - Gray

The GDS Hand-Stand with Uni-Conn Adapter is a high-quality accessory for the Uni-Conn system that significantly improves tablet usability on flat surfaces.Designed for professional use in mobile environments, the Hand-Stand allows for stable positioning of the device, ensuring convenient and ergonomic operation.The Uni-Conn adapter is installed before inserting the tablet into the IntelliSkin protective sleeve.The result is a reliable and secure stand without compromising the mobility or protection of the device.Product features RAM Mounts RAM-GDS-U1HSKU:Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case seriesIncl. Uni-Conn AdapterEasy installationAdditional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as:Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+.Devices shown are not included in the delivery.Only the RAM-GDS-U1HSKU adapter is supplied.

Objav podobné ako RAM Mounts GDS Hand-Stand with Uni-Conn Adapter for IntelliSkin Next Gen Cases - Hard- and Thin-Case Series - Screw-Set - Gray

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5 - 12V ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power Output: 15W Output voltage: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPHU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V-12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Screw-Set

The GDS® Uni-Conn™ Powered Snap-In Kiosk Dock with USB-C - Gray (RAM-GDS-DOCK-D10K-U3-C-GRY) is a free-standing, powered dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads. Securely dock and undock your device with the assistance of the mechanical attachment mechanism. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via USB-C connection. This dock features a weighted base and rubber pads that offer theft deterrence and prevent it from sliding around on surfaces. The light gray aesthetic is ideal for sophisticated, bright workplaces. One Dock to Connect Them All™ Always Protected. Always Connected.® Features Light gray, free-standing, powered Kiosk dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads GDS® connector and pogo pins provide charging via USB-C Weighted base with rubber pads prevents kiosk from moving Mechanical attachment mechanism allows for secure docking and undocking Product dimensions - Overall Width 5.1", Overall Height 6.71", Overall Depth 6.6" Material(s) - High strength composite Output voltage - 5V-20V @ 3A max Power output - 60W max Input connector - USB Type-C female Input cable length - 480 mm

Objav podobné ako RAM Mounts GDS Uni-Conn Powered Snap-In Kiosk Dock - Rear Pogo-Pins - USB-C Connector - Light Gray

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more. The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCK-D14-U1C-2A: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station - Rotatable & Tiltable - USB-C & Dual USB-A Connector

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more. The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCK-D14-U1C-2A-GRY: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station - Rotatable & Tiltable - USB-C & Dual USB-A Connector - Light Gray

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more. The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. Product features RAM-GDS-DOCK-D14-U3C-2A: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Easy insertion and removal Charging function Output Voltage: 5V-20V @ 3A max (USB-C Tablets) Power Output: 60W max Input Connector: USB-C / 2x USB-A (Pheripheral) Input ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station - Rotatable & Tiltable - USB-C & Dual USB-A Connector - Rear Pogo Pads

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more. The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. Product features RAM-GDS-DOCK-D14-U3C-2A-GRY: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Easy insertion and removal Charging function Output Voltage: 5V-20V @ 3A max (USB-C Tablets) Power Output: 60W max Input Connector: USB-C / 2x USB-A (Pheripheral) Input ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station - Rotatable & Tiltable - USB-C & Dual USB-A Connector - Rear Pogo Pads - Light Gray

The GDS® Uni-Conn™ Powered Locking Snap-In Wall Dock with PoE (RAM-GDS-DOCKL-W5-U3-POEU) is a versatile snap-in wall docking solution for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads and features a key lock for additional theft deterrence. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via the JST connector and PoE Adapter. This dock installs directly over a standard rectangular electrical outlet box. The snap-in attachment method makes this wall dock ideal for high-traffic environments. One Dock to Connect Them All™ Always Protected. Always Connected.® Features Snap-in dock featuring GDS® Technology™ uses an integrated pogo pin connector to provide high-speed charging; right side key lock provides additional theft deterrence Designed for devices enclosed in the IntelliSkin® Thin-Case™ with Rear Pogo Pads JST connector enables high-speed charging capabilities Installs directly over standard outlet boxes Hole pattern - 2-Hole 3.281" (Standard Electrical Box) Material(s) - High strength composite Output voltage - USB PD 3.0: 5V @ 3A, 9V @ 2.2A, 12V @ 1.67A Power output - 20 W max Input connector - JST Connector Input cable length - 800 mm

Objav podobné ako RAM Mounts GDS Uni-Conn Powered Locking Snap-In Wall Dock with PoE - Rear Pogo Pads - JST Connector

The RAM Mounts GDS Uni-Conn docking station is a free-standing 7" dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied via a USB-C connection to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCK-D11-7-U3C: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: 60W max Input Connector: USB-C Input Cable Length: ca. 150 cm Product Dimensions: Height from base to tilt bolt: 18.4 cm Base Width: 9.7 cm Base Depth: 9.7 cm Weight: approx. 925 g Additional information: The Lever Stop included with this dock is required in order to function properly. ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station (7") for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection

The RAM Mounts GDS Uni-Conn docking station is a free-standing 7" dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied via a USB-C connection to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCK-D11-7-U3C-GRY: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: 60W max Input Connector: USB-C Input Cable Length: ca. 150 cm Product Dimensions: Height from base to tilt bolt: 18.4 cm Base Width: 9.7 cm Base Depth: 9.7 cm Weight: approx. 925 g Additional information: The Lever Stop included with this dock is required in order to function properly. ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station (7") for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection - Gray

The GDS® Uni-Conn™ Powered Snap-In Kiosk Dock with USB-C (RAM-GDS-DOCK-D10K-U3-C) is a free-standing, powered dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads. Securely dock and undock your device with the assistance of the mechanical attachment mechanism. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via USB-C connection. This dock features a weighted base and rubber pads that provide theft deterrence and prevent it from sliding around on surfaces. One Dock to Connect Them All™ Always Protected. Always Connected.® Features Free-standing, powered Kiosk dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads GDS® connector and pogo pins provide charging via USB-C Weighted base with rubber pads prevents kiosk from moving Mechanic attachment mechanism allows for secure docking and undocking Product dimensions - Overall Width 5.1", Overall Height 6.71", Overall Depth 6.6" Material(s) - High strength composite Output voltage - 5V-20V @ 3A max Power output - 60W max Input connector - USB Type-C female Input cable length - 480 mm

Objav podobné ako RAM Mounts GDS Uni-Conn Powered Snap-In Kiosk Dock - Rear Pogo-Pins, USB-C

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more. The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCK-D14-U1E-2A: Only ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station - Rotatable & Tiltable - RJ45 Connection & Dual USB-A - PoE (Power over Ethernet)

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more. The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCK-D14-U1E-2A-GRY: Only ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station - Rotatable & Tiltable - RJ45 Connection & Dual USB-A - PoE (Power over Ethernet) - Light Gray

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-7-U1C-GRY: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station (7“) with Key Locking (Right) - Rotatable & Tiltable - USB-C Connection - Gray

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-14-U1C: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station (14“) with Key Locking (Right) - Rotatable & Tiltable - USB-C Connection

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-14-U1C-GRY: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station (14“) with Key Locking (Right) - Rotatable & Tiltable - USB-C Connection - Gray

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-7-U1C: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station (7“) with Key Locking (Right) - Rotatable & Tiltable - USB-C Connection

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more. The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. Product features RAM-GDS-DOCK-D14-U3E-2A: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Easy insertion and removal Charging function Output Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station - Rotatable & Tiltable - RJ45 Connection & Dual USB-A - PoE (Power over Ethernet) - Rear Pogo Pads

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more. The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. Product features RAM-GDS-DOCK-D14-U3E-2A-GRY: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Easy insertion and removal Charging function Output Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Stand Docking Station - Rotatable & Tiltable - RJ45 Connection & Dual USB-A - PoE (Power over Ethernet) - Rear Pogo Pads - Lig

The RAM® Safe-Case™ for Zebra ET4x 8" Tablet (RAM-TE-ZE20) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Zebra ET4x 8", the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Zebra ET4x 8" Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 10.42", Overall Width 6.63", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Zebra ET4x 8" Tablet - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Zebra ET4x 8" Tablet - Gray (RAM-TE-ZE20-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Zebra ET4x 8", the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock (look for the octagon icon on product listings). Features Key-locking, 2-piece enclosure for Zebra ET4x 8" Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray Product dimensions - ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Zebra ET4x 8" Tablet - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Zebra ET4x 10" Tablet (RAM-TE-ZE21) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions ideal for demanding field or industrial applications. Custom-fit for the Zebra ET4x 10", the Safe-Case™ provides precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Zebra ET4x 10" Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 12.16", Overall Width 7.72", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Zebra ET4x 10" Tablet - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Zebra ET4x 10" Tablet - Gray (RAM-TE-ZE21-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Zebra ET4x 10", the Safe-Case™ provides precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Zebra ET4x 10" Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray Product dimensions - Overall Height 12.16", Overall Width 7.72", Overall Thickness ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Safe-Caseâ„¢ for Zebra ET4x 10" Tablet - Key-Lock, several Hole Pattern, light gray

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9 & A7 Lite 8.7" in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9 & A7 Lite 8.7" - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the "No Battery Mode" function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM83CDU holder is supplied.

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector