zebra rap 396u universal scanner holder

Zebra P1014125 universal roll holder

Objav podobné ako Zebra P1014125 universal roll holder

Datalogic 94ACC0156 scanner holder

Objav podobné ako Datalogic 94ACC0156 scanner holder

RAM Mounts scanner holder with magnetic Tough-Mag adapter

Objav podobné ako RAM Mounts scanner holder

Grohe Vitalio Universal sprchová tyč lepenie vŕtanie
Grohe Vitalio Universal sprchová tyč s držiakom
Hansgrohe iFrame universal 01022180
Hansgrohe uBox Universal nerez
modul na závesné WC Hansgrohe iFrame universal
podomietkové teleso Hansgrohe iBox universal 2
batéria s výškou 39,5 cm
bezpečnostné sandále Oden Medical Pink 39
biela WC doska s dĺžkou sedátka 39,5 cm
Blanco 39 l sivý odpadkový kôš
číre sklenené umývadlo priemer 39,5 cm
Daiwa broďáky D-VEC Flex Black 38/39
dámska pracovná obuv Suecos FRIDA čierna 39
dĺžka 39 cm
dĺžka sprchovej hlavice 39 cm
drez BSG 611-78/39 ónyx

Zebra prsteňový skener RS419 je 1D skener s HP Engine. Je určený na pripojenie k terminálom noseným na ruke WT4X90 a WT41N0 prostredníctvom kábla. Poskytuje efektívne skenovanie v priemyselných a logistických aplikáciách.

• Ergonomický prsteňový dizajn pre dlhodobé používanie
• Vysoký výkon 1D HP Engine pre rýchle skenovanie
• Káblové pripojenie k terminálu zabezpečuje spoľahlivý prenos dát
• Kompatibilita s terminálmi Zebra WT4X90 a WT41N0

Objav podobné ako Zebra ring scanner RS419

RAM Mounts Universal Scanner Bracket (Composite) - Diamond Side Attachment (Trapezoid), Screw Set, in Poly Bag

Objav podobné ako RAM Mounts Universal Scanner Bracket

Aktívny držiak Brodit je určený pre modely MC3400 a MC3450. Napája sa cez cigaretový zapalovač v aute a ponúka bezpečné uchytenie zariadenia. Je vhodný pre stabilné umiestnenie navigačných zariadení počas jazdy.

• Napájanie cez cigaretový zapalovač v aute
• Univerzálne uchytenie pre modely MC3400 a MC3450
• Bezpečné a stabilné držanie zariadenia
• Jednoduchá inštalácia a použitie

Objav podobné ako Brodit, active holder

Zebra OneCare Essential je 5-ročný servisný plán určený pre zariadenia Zebra ZC100. Plán je možné aktivovať do 30 dní od kúpy hardvéru. Poskytuje komplexné servisné pokrytie počas celej doby trvania.

• 5-ročné komplexné servisné pokrytie
• Možnosť aktivácie do 30 dní od nákupu zariadenia
• Špecializovaný servis pre Zebra ZC100 zariadenia
• Dlhoročná ochrana investície do hardvéru

Objav podobné ako Zebra service Z1AE-ZC1X-5C0, OneCare Essential, 5 years

Toto je 3-ročná servisná zmluva Zebra OneCare Select pre model FX9600 s kódom Z1AS-FX9600-3C03. Poskytuje komplexné servisné pokrytie vrátane technickej podpory a údržby. Slúži na zabezpečenie dlhodobej spoľahlivosti a výkonu zariadenia.

• 3-ročné servisné pokrytie pre spoľahlivosť
• Rýchla reakcia a odborná podpora
• Komplexná údržba a preventívne prehliadky
• Minimalizácia prestojov a zvýšenie produktivity

Objav podobné ako Zebra Z1AS-FX9600-3C03 service, OneCare Select, 3 years

Zebra OneCare Essential je 5-ročné servisné pokrytie pre tlačiare Zebra ZT421. Službu je možné zakúpiť do 30 dní od nákupu zariadenia. Poskytuje komplexnú servisnú starostlivosť počas celej doby trvania.

• 5-ročné komplexné servisné pokrytie
• Možnosť zakúpenia do 30 dní od nákupu zariadenia
• Špecializované na model Zebra ZT421
• Profesionálna podpora a údržba

Objav podobné ako Zebra Z1AE-ZT421-5C0, Service

Toto je originálna náhradná batéria pre model Zebra P1080383-603. Poskytuje spoľahlivý výkon a dlhšiu výdrž pre vaše zariadenie. Je plne kompatibilná a určená na jednoduchú výmenu.

• Originálna kompatibilná batéria
• Dlhšia výdrž a spoľahlivosť
• Jednoduchá výmena a inštalácia
• Optimálny výkon pre zariadenie

Objav podobné ako Zebra P1080383-603 baterie

Zebra ZD611 je stolná tlačiareň štítkov s priamym termotlačom a rozlíšením 300 dpi. Disponuje integrovanou rezačkou a podporuje pripojenie cez USB, Ethernet a Bluetooth. Je vhodná pre logistiku, maloobchod a skladové aplikácie.

• Priamy termotlač bez farbiacej pásky znižuje prevádzkové náklady
• Vysoké rozlíšenie 300 dpi zabezpečuje ostrú tlač kódov a textov
• Integrovaná rezačka automaticky oddeľuje štítky pre plynulú prácu
• Flexibilné pripojenie cez USB, Ethernet a Bluetooth BLE

Objav podobné ako Zebra ZD611 ZD6A023-D2EE00EZ DT, 12 dots/mm (300 dpi), label printer, EPLII, ZPLII, USB, BT (BLE), Ethernet, cutter, grey (Successor GC420t)

Zebra OneCare Essential je trojročné servisné poistenie pre mobilný počítač TC56. Poskytuje komplexné pokrytie pre zariadenie, ale nezahŕňa ochranu pre kolísky. Toto riešenie je optimalizované pre model TC56 a zaisťuje jeho dlhodobú funkčnosť.

• Komplexné servisné pokrytie na 3 roky
• Špeciálne určené pre model TC56
• Zabezpečuje spoľahlivosť zariadenia
• Jednoduchá aktivácia a správa

Objav podobné ako Zebra service Z1AE-TC56XX-3C00, 3 years, TC56

Toto je 5-ročná servisná zmluva Zebra OneCare Select pre modely VC83XX. Poskytuje komplexné krytie údržby a oprav pre zariadenia Zebra. Služba zabezpečuje profesionálnu podporu počas celej doby trvania.

• 5-ročné komplexné servisné krytie
• rýchla reakcia na poruchy a opravy
• profesionálna podpora pre Zebra zariadenia
• predvídateľné náklady na údržbu

Objav podobné ako Zebra Service OneCare Select VC83XX Z1AS-VC83XX-5C03, 5 Years

Zebra TT ZD220d je kompaktná priemyselná tlačiareň štítkov s rozlíšením 203 dpi a rýchlosťou tlače až 102 mm/s. Ponúka dvojrežimovú tlač (priama termálna/termotransferová) a je vybavená integrovaným odlepovačom. Je vhodná pre logistiku, maloobchod a zdravotníctvo.

• Kompaktný a robustný dizajn vhodný pre náročné prostredie
• Dvojrežimová tlač (priama termálna a termotransferová) pre flexibilitu
• Vysoká rýchlosť tlače až 102 mm/s s rozlíšením 203 dpi
• Veľká vnútorná pamäť (256 MB Flash + 128 MB SDRAM) pre grafiku a písma

Objav podobné ako Zebra TT ZD220d, 8 dots/mm (203 dpi), odlepovač, EPLII, ZPLII, USB

Priemyselná tlačiareň Zebra ZT231 TT 300dpi EZPL ponúka vysokú rýchlosť a kvalitu tlače v kompaktnom dizajne. Podporuje rozšírenie o voliteľné funkcie ako RFID a bezdrôtové pripojenie. Zariadenie je vhodné pre náročné pracovné prostredia s potrebou spoľahlivej tlače štítkov.

• Vysoká rýchlosť tlače pre náročné pracovné prostredia
• Kvalitná 300dpi tlač s vysokým rozlíšením
• Veľká farebná dotyková obrazovka pre intuitívne ovládanie
• Možnosť rozšírenia o RFID a bezdrôtové funkcie

Objav podobné ako Zebra ZT231 TT 300dpi LAN EZPL

Zebra OneCare TSS Z1B5-EMH250-5000 poskytuje technickú a softvérovú podporu na obdobie 5 rokov. Služba zahŕňa telefonickú podporu a údržbu softvéru. Je určená pre konkrétne zariadenia značky Zebra.

• Komplexná technická a softvérová podpora na 5 rokov
• Telefonická podpora pre rýchle riešenie problémov
• Pravidelná údržba a aktualizácie softvéru
• Špecificky navrhnuté pre zariadenia Zebra

Objav podobné ako Zebra service TSS Z1B5-EMH250-5000, software support, 5 years

Dokovacia stanica Zebra CRD9101-4001CR je navrhnutá pre nabíjanie a synchronizáciu zariadení Zebra, najmä modelu TC52. Poskytuje spoľahlivé pripojenie v priemyselných a obchodných prostrediach. Jej konštrukcia zabezpečuje bezpečné umiestnenie zariadenia počas nabíjania.

• Robustná a odolná konštrukcia vhodná do priemyselných prostredí
• Jednoduché a spoľahlivé nabíjanie a synchronizácia zariadenia
• Kompatibilita s modelom Zebra TC52 a ďalšími príslušnými zariadeniami
• Jednoduchá inštalácia a pripojenie cez štandardné rozhrania

Objav podobné ako Zebra CRD9101-4001CR cradle

Zebra KYPD-MC9329NMR-01 je kompaktná 29-klávesová klávesnica určená pre priemyselné použitie. Poskytuje odolný dizajn vhodný pre skladové a logistické prostredia. Klávesnica umožňuje efektívne zadávanie údajov s jednoduchou integráciou do existujúcich systémov.

• Kompaktný dizajn s 29 klávesami pre efektívnu prácu
• Vysoká odolnosť pre náročné priemyselné prostredie
• Jednoduché pripojenie a kompatibilita so Zebra zariadeniami
• Ergonomické usporiadanie kláves pre rýchle zadávanie údajov

Objav podobné ako Zebra KYPD-MC9329NMR-01 keyboard, 29 keys

Nabíjacia stanica Zebra 3PTY-PCLIP-241424 je určená pre automatické nabíjanie viacerých ručných terminálov súčasne. Konštrukcia je navrhnutá pre jednoduchú integráciu do pracovných staníc v priemyselných a logistických prostrediach. Zariadenie zabezpečuje spoľahlivé nabíjanie a bezpečné uchopenie terminálov.

• Automatické nabíjanie bez potreby manuálneho pripájania
• Možnosť súčasného nabíjania viacerých zariadení
• Robustná konštrukcia vhodná do priemyselných prostredí
• Zabezpečené uchopenie zariadení počas nabíjania

Objav podobné ako Zebra 3PTY-PCLIP-241424 auto charging station

Nabíjacia stanica Zebra CRD1S0T-RFD40-TC2X-CHG-1R je určená pre bezdrôtové moduly Zebra RFD40 a TC2X. Poskytuje spoľahlivé nabíjanie v priemyselných podmienkach. Jej konštrukcia je navrhnutá pre jednoduchú integráciu do pracovného prostredia.

• Kompatibilita s modulmi Zebra RFD40 a TC2X
• Jednoduchá inštalácia a používanie
• Robustná konštrukcia pre priemyselné prostredie
• Efektívne nabíjanie s jedným slotom

Objav podobné ako Zebra CRD1S0T-RFD40-TC2X-CHG-1R charging station

Tlačová hlava Zebra P1115687 je originálny náhradný diel s rozlíšením 8 bodov/mm (203 dpi). Je určená pre vybrané modely tlačiarní Zebra. Balenie obsahuje 10 kusov.

• Vysoká kvalita a spoľahlivosť
• Originálny výrobok od Zebra
• Optimálne pre tlač s rozlíšením 203 dpi
• Vhodné pre viacero modelov tlačiarní Zebra

Objav podobné ako Zebra P1115687 print head, 8 dots/mm (203 dpi), pack of 10

Zebra RFD40 RFD4030-G00B700-E8 je ručná UHF RFID čítačka navrhnutá pre priemyselné a logistické aplikácie. Zariadenie ponúka vysokú odolnosť, dlhú výdrž batérie a efektívne skenovanie RFID tagov. Je vybavené dotykovým displejom a operačným systémom Android pre jednoduchú integráciu a ovládanie.

• Vysoká odolnosť pre náročné priemyselné prostredie (IP65 a odolnosť proti pádu)
• Dlhá výdrž batérie pre celodenné používanie
• Rýchle a presné skenovanie UHF RFID tagov na vzdialenosť
• Intuitívne ovládanie s dotykovým displejom a Android OS

Objav podobné ako Zebra RFD40 RFD4030-G00B700-E8, RFID (UHF)

Zebra OneCare Essential je 5-ročné predĺžené záručné poistenie pre mobilné terminály TC77XX. Služba ponúka komplexné pokrytie vrátane 3-dňovej výmeny zariadenia a expedičného odberu. Je dostupné len pre zariadenia zakúpené do 30 dní a platí v EÚ.

• 5-ročné poistenie s komplexným pokrytím
• 3-dňová výmena zariadenia (TAT)
• Expedite Collection – rýchly odber poškodeného zariadenia
• Dostupné pre zariadenia zakúpené do 30 dní

Objav podobné ako Zebra Service

Zebra DT ZD230d je priemyselná tlačiareň štítkov, ktorá nahrádza model GC420d. Ponúka rozlíšenie 203 dpi, maximálnu šírku tlače 104 mm a rýchlosť tlače až 152 mm/s. Vybavená je USB a Ethernet konektivitou a podporuje emulácie EPLII a ZPLII.

• Vysoká tlačová kvalita s rozlíšením 203 dpi (8 bodov/mm)
• Rýchlosť tlače až 152 mm/s pre efektívnu prácu
• Flexibilná konektivita cez USB a Ethernet port
• Kompatibilita s populárnymi emuláciami EPLII a ZPLII

Objav podobné ako Zebra DT ZD230d, 8 dots/mm (203 dpi), EPLII, ZPLII, USB, Ethernet, black (nástupca GC420d)

Ručný snímač čiarových kódov Zebra DS8178-SR z radu DS8100 poskytuje vysoký výkon na skenovanie takmer akýchkoľvek 1D a 2D čiarových kódov. Je navrhnutý na zrýchlenie pokladničných procesov a zníženie čakacích radov. Súčasťou balenia je USB KIT a prezentátor.

• Bezprecedentný výkon skenovania 1D a 2D čiarových kódov
• Inovatívne funkcie nad rámec základného snímania
• Neprekonateľné možnosti správy s bezplatnými nástrojmi
• Optimalizuje pokladničné procesy pre osobnejší zážitok zákazníkov

Objav podobné ako Zebra barcode reader DS8178-SR 2D black FIPS presentation stand DS8178-SR7U2100PFW, USB KIT

Rolka polyesterových etikiet Zebra Z-Ultimate 2500T s rozmermi 76x25 mm a permanentným lepidlom. Etikety obsahujú RFID technológiu a na jednej rolke je 1015 kusov. Vhodné pre priemyselné a logistické aplikácie vyžadujúce odolnosť a pokročilé sledovanie.

• Vysokoodolný polyesterový materiál vhodný pre náročné podmienky
• Permanentné lepidlo zabezpečuje dlhodobú priľnavosť na rôzne povrchy
• Integrovaná RFID technológia pre pokročilé sledovanie a identifikáciu
• Veľký počet 1015 etikiet na jednej rolke pre efektívnu prácu

Objav podobné ako Zebra ZIPRD3017407 Z-Ultimate 2500T, label roll, RFID, 76x25mm, 1015 etikiet, biele

Zebra DS8108 je ručný 2D skener s imagerom štandardného dosahu. Podporuje viacero rozhraní vrátane RS232, KBW a USB. Má ochrannú triedu IP42 a je dostupný v bielej farbe.

• 2D skener s imagerom pre štandardný dosah
• Podpora viacerých rozhraní (RS232, KBW, USB)
• Odolnosť triedy IP42 proti prachu a kvapkám vody
• Ergonomický ručný dizajn v bielej farbe

Objav podobné ako Zebra DS8108 DS8108-SR00006ZZWW, 2D, SR, multi-IF, white

Sprchový žľab Tece Linus s dĺžkou 70 cm je vyrobený z nerezu v lesklom prevedení. Má mriežku v dekore zebra a priemer odpadu DN 50. Balenie obsahuje sifón a montážne nohy.

• Vyrobený z odolného nerezu v lesklom prevedení.
• Dodáva sa s mriežkou v modernom dekore zebra.
• Súčasťou balenia je sifón a montážne nohy.
• Minimálna stavebná výška len 7 cm pre ľahšiu inštaláciu.

Objav podobné ako Tece Linus sprchový žľab 70 cm nerez lesk zebra 15100079 15.100.070

Sprchový žľab Tece Linus je vyrobený z nerezu s lesklým povrchom a šírkou roštu 84 cm. Jeho celková dĺžka je 90 cm a minimálna stavebná výška 7 cm. Súčasťou balenia je mriežka v dekore zebra, sifón, montážne nohy a odpad s priemerom DN 50.

• Vyrobený z kvalitného nerezu v lesklom prevedení.
• Dodáva sa s mriežkou v modernom dekore zebra.
• Súčasťou balenia je sifón a montážne nohy.
• Minimálna stavebná výška len 7 cm.

Objav podobné ako Tece Linus sprchový žľab 90 cm nerez lesk zebra 15100099 15.100.090

SAPHO MARAGUA je sklenené umývadlo na dosku s priemerom 39,5 cm vyrobené z číreho skla. Povrch je opatrený trvanlivým gravírovaním. Umývadlo je určené pre moderné kúpeľne.

• Vysokokvalitné číre sklo s odolným gravírovaním
• Moderný dizajn vhodný pre súčasné interiéry
• Jednoduchá inštalácia na dosku
• Odolný povrch odolný voči škrabancom a vodnému kameňu

Objav podobné ako SAPHO - MARAGUA gravírované sklenené umývadlo na dosku priemer 39,5cm, číre sklo TY214CL

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDHU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Heated Pogo-Pins Lockable with key Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Holder (Key-Locking) for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - Heated Pogo-Pins - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE2434CPDU holder is supplied.

Objav podobné ako RAM Mounts GDS Holder for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE16CPDU holder is supplied.

Objav podobné ako RAM Mounts GDS Holder for Zebra EC50 & EC55 in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2HU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2U:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 900mAh per ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 with Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PLU:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with KeysInput Connector: USB-A Input Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 without Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PL-1U:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with keyInput Connector: USB-AInput Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PL-1U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU:Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC ReaderAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25LU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PD2KLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5mm DCOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PD2KLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET80/85

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PDU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PDU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE21PNLLU:Compatible with PowerPack batterieEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE21PU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE21PNLLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET40/45 (10")

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PCLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingInput Connector: 5.5mm DCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PCLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")