ram mounts tough dock cradle
RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Cradle for Zebra ET4x 8 Inch Tablets in Zebra Protective Frame - Power Connection 5.5 mm Jack Plug, Dual USB-A, AMPS and VESA Mounts
Objav podobné ako RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Cradle for Zebra ET4x 10 Inch Tablets in Zebra Protective Frame - Power/Data Connection, 5.5 mm Jack Plug, USB-A, AMPS and VESA Mounts
Objav podobné ako RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Cradle for Zebra ET4x 8 Inch Tablets in Zebra Protective Frame - lockable, power connection 5.5 mm jack plug, dual USB-A, AMPS and VESA mount
Objav podobné ako RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Cradle for Zebra ET4x 10 Inch Tablets in Zebra Protective Frame - with power supply 5.5 mm jack plug, AMPS and VESA mount
Objav podobné ako RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Cradle for Zebra ET4x 10 Inch Tablets in Zebra Protective Frame - lockable, power/data connection, 5.5 mm jack plug, USB-A, AMPS and VESA mount
Objav podobné ako RAM Mounts Tough-Dock Cradle
RAM Mounts Tough-Dock Bracket
RAM Mounts Tough-Dock Bracket for Zebra ET4x 10 Inch Tablets in Zebra Protective Frame - lockable, power connection 5.5 mm jack plug, dual USB-A, AMPS and VESA mount
Objav podobné ako RAM Mounts Tough-Dock Bracket
RAM Mounts Tough-Dock Bracket
RAM Mounts Tough-Dock Bracket for Zebra ET4x 10 inch tablets in Zebra protective frame - power connection 5.5 mm jack plug, dual USB-A, AMPS and VESA mount
Objav podobné ako RAM Mounts Tough-Dock Bracket
RAM Mounts Tough-Dock
Tough-Dock, Active Holder, AMPS, VESA 75x75, fits for: ET4X (8 )
Objav podobné ako RAM Mounts Tough-Dock
RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle for Zebra TC73/TC78 in IntelliSkin Charging/Protective Cases - USB-C Input, 2-Hole AMPS Mounts
Objav podobné ako RAM Mounts GDS Charging Cradle
RAM Mounts Tough-Tray
RAM Mounts Tough-Tray with Flat Side Arms - Universal Laptop Holder, AMPS Mounts
Objav podobné ako RAM Mounts Tough-Tray
RAM Mounts Tough-Tray II
RAM Mounts Tough-Tray II - Universal Holder for Laptops / Netbooks / Tablets, AMPS Mounts
Objav podobné ako RAM Mounts Tough-Tray II
RAM Mounts Tough-Claw Set
RAM Mounts Tough-Claw Set - C-Ball (1.5 inches), Tough-Claw Large (Diameter 25.4-55.9 mm), Center Link Arm (approx. 145 mm)
Objav podobné ako RAM Mounts Tough-Claw Set
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Honeywell CT40/45/47 - 5.5 mm jack input, 2-hole AMPS mount
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle for Zebra TC2x/TC5x in IntelliSkin Charging/Protective Cases - lockable (key), USB-A/-C input, 2-hole AMPS mount
Objav podobné ako RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle for Zebra TC2x/TC5x in IntelliSkin Charging/Protective Cases - lockable (key), USB-C input, 2-hole AMPS mount
Objav podobné ako RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle for Zebra TC73/TC78 in IntelliSkin Charging/Protective Cases - lockable (key), heated pins, USB-A/-C input, 2-hole AMPS mount
Objav podobné ako RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle for Zebra TC73/TC78 in IntelliSkin Charging/Protective Cases - lockable (key), USB-A/-C input, 2-hole AMPS mount
Objav podobné ako RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle for Zebra TC73/TC78 in IntelliSkin Charging/Protective Cases - lockable (key), USB-C input, 2-hole AMPS mount
Objav podobné ako RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle
RAM Mounts GDS Charging Cradle for Zebra TC73/TC78 in IntelliSkin Charging/Protective Cases - USB-A/-C input, 2-hole AMPS mount
Objav podobné ako RAM Mounts GDS Charging Cradle
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Zebra ET5x 10.1 Series - lockable (combination lock), 5.5 mm jack input, dual USB-A output, VESA 75x75 mount
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Zebra ET5x 10.1 Series - 5.5 mm jack input, VESA 75x75 mount
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Zebra ET5x 10.1 Series - lockable (key), 5.5 mm jack input, USB-A output, VESA 75x75 mount
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Zebra ET5x 10.1 Series - 5.5mm jack input, dual USB-A output, VESA 75x75 mount
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Zebra ET5x 10.1 Series - lockable (key), 5.5 mm jack input, dual USB,A output, VESA 75x75 mount
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Honeywell RT10 Tablets - 5.5 mm jack input, dual USB-A output, VESA 75x75 mount
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Zebra EC50 EC55 - USB-A, Form-Fit Cradle with 2-Hole AMPS Holder
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Honeywell RT10 Tablets - lockable (key), 5.5 mm jack input, dual USB-A output, VESA 75x75 mount
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts Charging Dock
RAM Mounts Charging Dock for Samsung Galaxy Tab Active4 Pro/Active Pro - USB-C input, 4-hole AMPS mount
Objav podobné ako RAM Mounts Charging Dock
RAM Mounts Tough-Ball
RAM Mounts Tough-Ball with M8 - 1.25 x 10 mm Threaded Pin - C-Ball (1.5 inches), in a poly bag
Objav podobné ako RAM Mounts Tough-Ball
RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Claw Retaining Clip (Medium) with Locking Screw - C-Ball (1.5 ), Diameter 25.4-40.6mm
Objav podobné ako RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Ball
RAM Mounts Tough-Ball with M10 - 1.5 in. x 25 mm Threaded Pin - B-Ball (1 Inch)
Objav podobné ako RAM Mounts Tough-Ball
RAM Mounts Tough-Ball
RAM Mounts Tough-Ball with M6-1 x 6 mm Threaded Pin - B-Ball (1 Inch), in Poly Bag
Objav podobné ako RAM Mounts Tough-Ball
RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Claw Retaining Clip (Small) with Locking Screw - B-Ball (1 inch), Diameter 15.9-29.0 mm
Objav podobné ako RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Claw
RAM Mounts Tough-Claw Retaining Clip (Small) with Locking Screw - B-Ball (1 inch), Additional C-Ball (1.5 Inch), Diameter 15.9-29.0 mm
Objav podobné ako RAM Mounts Tough-Claw
RAM Mounts Tough-Claw
RAM Mounts Tough-Claw Retaining Clip Base (Small) without Ball - Diameter 15.9-29.0 mm
Objav podobné ako RAM Mounts Tough-Claw
RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Claw Retaining Clip (Small) with Locking Screw - C-Ball (1.5 ), Diameter 15.9-29.0mm
Objav podobné ako RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Claw Retaining Clip (Large) with Locking Screw - C-Ball (1.5 ), Diameter 25.4-55.9mm
Objav podobné ako RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Claw Retaining Clip (Large) with Locking Screw - B-Ball (1 inch), Diameter 25.4-55.9 mm
Objav podobné ako RAM Mounts Tough-Claw Retaining Clip
RAM Mounts Tough-Tray
RAM Mounts Tough-Tray - Universal Laptop-Halter, AMPS-Aufnahme
Objav podobné ako RAM Mounts Tough-Tray
RAM Mounts Tough-Claw malá svorka s ručným upínaním pre priemer 15,9-38,1 mm, s 1
RAM svorka s ručným upínaním pre priemer 15,9 - 38,1 mm s 1" čapom sa dokonale hodí pre rýchle upnutie vášho zariadenia napríklad na riadidlá motocykla, barany v kokpite lietadla, sedlovku bicykla, madlá na kajaku atď. Bezpečne udrží napríklad mobilný telefón, GPS navigáciu, GPS navigáciu, GPS navigáciu chránia povrch pred poškodením a zaisťujú stabilitu. Čeľuste svorky sú navrhnuté pre guľaté, ploché aj nerovné povrchy. Pre priemer tyče: 0 – 28,9 mm Kompatibilný so systémom ramien a držiakov RAM mount Doživotná záruka RAM mount Materiál: Vysokopevnostný plast Nerez oceľ Veľkosť guľového čapu: Priemer 1\", veľkosť „B", gumový Váha: 159 g Poznámka: „U“ v čísle dielu znamená, že výrobok je balený v PU sáčku.
Objav podobné ako RAM Mounts Tough-Claw malá svorka s ručným upínaním pre priemer 15,9-38,1 mm, s 1
RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9
This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab A9 A7 Lite 8.7 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80-MMU holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9
RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3
This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU: Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CP-NFCU holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3
RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3
This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab Active2, Active3 Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62-MMU holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3
RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9
This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7, S9 S9 FE in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM76CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM76CPU holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9
RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3
This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the No Battery Mode function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3
RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+
This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ S10+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+
RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+- in IntelliSkin Next Gen Protective Sleeve - USB-C Connector
This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+- in IntelliSkin Next Gen Protective Sleeve - USB-C Connector
RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S8+, S9 FE+, S9+
This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S8+, S9 FE+, S9+
RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3
This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62C-CU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62C-CU holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3
RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“)
This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CPU holder is supplied.
Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“)