zebra et8x port expander with video

ET8X Port Expander s videom - Poľne inštalovateľný 9-portový expander so 4x USB (2x 3.0), 3x Ethernet RJ45, 2x HDMI. Pridať do Zebra Power Dock pre dokovaciu stanicu vozidla s HDMI videom

Objav podobné ako Zebra ET8X Port Expander with Video

Voliteľný poľný inštalovateľný kryt s pohodlným skrutkovaním pre dokovacie riešenia Zebra s rozšírením portov, ako je vozidlová dokovacia stanica alebo kancelárska dokovacia stanica

Objav podobné ako Zebra Port Expander Cover

ET8X Dock Fan Module - Pripája sa k doku a poskytuje ventiláciu pre extrémne klimatické podmienky. Odporúča sa iba pre zvýšené teploty s nadmerným solárnym zaťažením alebo neklimatizované vozidlá.

Objav podobné ako Zebra ET8X Dock Fan Module

košeľa pre čašníkov vo farbe port
červená port košeľa pre personál
košeľa pre čašníka vo farbe port
pánska košeľa port červená farba
červená port košeľa pre čašníkov
pánska čašnícka košeľa červená port
hadicový port pre kontajnery
profesionálna sada na niveláciu Rubi s video návodom
systém sous-vide hendi gn2/3
digitálne ovládanie sous-vide zariadenia
nerezové vložky pre sous-vide
sous-vide varič s objemom 13 litrov
sous vide vakuový varič 20 litrov
digitálny sous vide varič 45-95°C
sous vide prístroj s nerezovými vložkami
kompaktný sous vide 20l 600x330mm

Gril Expander je prídavný rošt pre keramický gril Kamado Joe Classic Joe, ktorý zvyšuje varnú plochu. Umožňuje prípravu viacerých jedál naraz alebo zeleniny ďalej od priameho tepla. Jeho konštrukcia zabezpečuje stabilitu a jednoduchú montáž.

• Zväčšuje varnú plochu až o 60%
• Umožňuje prípravu zeleniny mimo priameho ohňa
• Stabilná konštrukcia s otvormi na nožičkách
• Jednoduchá inštalácia priamo na existujúci rošt

Objav podobné ako KAMADO Gril Expander na keramický gril Kamado Joe Classic Joe

PORT Dokovacia stanica 11v1 Poskytuje výkon až 60W a spravuje až 11 periférií cez jeden port USB-C. Všeobecné vlastnosti Dokovacia stanica umožňuje pripojenie k notebooku a nabíjaniu až do výkonu 60W. Ponúka možnosť zobrazenia 3x 4K - HDMI a displejové porty a zobrazenia s vysokým rozlíšením až do 5k Ultra HD. Kompatibilita Stanica je kompatibilná s notebookmi USB 3.0/USB-C as notebookmi PC a Mac. Technické špecifikácie 3x obrazovka (HDMI a Display Porty): 1x HDMI, rozlíšenie videa až 3840x2160 @ 30Hz - 4K; 2x port displeja, rozlíšenie videa až 4096 x 2160 @ 60Hz - 5K. 1x sieť Ethernet LAN: Gigabitový ethernet 10/100/1000 Mb/s. 5x porty USB 3.0: 1 predný port podporuje rýchle nabíjanie; 4 ďalšie porty zdieľajú až 5V a 0.9A. 1x USB-C port pre nabíjanie: Napájanie až 60W. 1x konektor pre mikrofón. 1x audio konektor. Obsah balenia 1 Dokovacia stanica USB 3.0 / USB-C 1 Napájací adaptér 135 W 1 Kombinovaný kábel USB-C / USB 3.0 (100 cm) 1 Užívateľská príručka

Objav podobné ako PORT dokovacia stanica 11v1 s výkonom až 60 W

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2HU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU:Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC ReaderAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25LU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2U:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 900mAh per ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDHU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Heated Pogo-Pins Lockable with key Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Holder (Key-Locking) for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - Heated Pogo-Pins - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE2434CPDU holder is supplied.

Objav podobné ako RAM Mounts GDS Holder for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE16CPDU holder is supplied.

Objav podobné ako RAM Mounts GDS Holder for Zebra EC50 & EC55 in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

Sprchový žľab Tece Linus s dĺžkou 70 cm je vyrobený z nerezu v lesklom prevedení. Má mriežku v dekore zebra a priemer odpadu DN 50. Balenie obsahuje sifón a montážne nohy.

• Vyrobený z odolného nerezu v lesklom prevedení.
• Dodáva sa s mriežkou v modernom dekore zebra.
• Súčasťou balenia je sifón a montážne nohy.
• Minimálna stavebná výška len 7 cm pre ľahšiu inštaláciu.

Objav podobné ako Tece Linus sprchový žľab 70 cm nerez lesk zebra 15100079 15.100.070

Sprchový žľab Tece Linus je vyrobený z nerezu s lesklým povrchom a šírkou roštu 84 cm. Jeho celková dĺžka je 90 cm a minimálna stavebná výška 7 cm. Súčasťou balenia je mriežka v dekore zebra, sifón, montážne nohy a odpad s priemerom DN 50.

• Vyrobený z kvalitného nerezu v lesklom prevedení.
• Dodáva sa s mriežkou v modernom dekore zebra.
• Súčasťou balenia je sifón a montážne nohy.
• Minimálna stavebná výška len 7 cm.

Objav podobné ako Tece Linus sprchový žľab 90 cm nerez lesk zebra 15100099 15.100.090

This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE21PNLLU:Compatible with PowerPack batterieEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE21PU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE21PNLLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET40/45 (10")

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PD2U:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp- Right or NFC-RepeaterInput Connector: 5.5mm DCOutput ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PDLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCOutput ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PDKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Lockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.This dock is not compatible with IntelliSkin.For IntelliSkin ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Zebra ET40/45 (8")

This RAM Mounts EZ-Roll‘r (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Lockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE20PKLU holder is supplied.

Objav podobné ako RAM Mounts EZ-Roll’r Holder (key-locking) for Zebra ET40/45 (8")

This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional informations: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PNLLU:Compatible with PowerPack batterieEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE20PU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE20PNLLU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Zebra ET40/45 (8")

Lock module / 2 keys Zebra ET401 8“, 10” with rugged frame + expansion back

Objav podobné ako Lock Module with 2 Keys, ET401 8" & 10"

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.

Objav podobné ako RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE20PU holder is supplied.

Objav podobné ako RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.Devices ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

This RAM Mounts form-fit holder is suitable for Zebra MC3300/3400/3450 with or without rugged boot. To insert the device, press the upper part of the holder with the device facing upwards and insert the appropriate device.Thanks to the spring-loaded design, the device sits firmly and securely in the holder.The back of the device holder is designed to accommodate a round base plate (not included).Product features RAM Mounts RAM-HOL-ZE33PUSpring-loaded design for easy insertion and removalScanning function possible in holderAdditional note: Devices shown are not included in delivery.Only the RAM-HOL-ZE33PU holder is supplied.

Objav podobné ako RAM Mounts holder for Zebra MC3300/3400/3450

TP-Link TL-SG3210XHP-M2 JetStream 8-Port 2.5GBASE-T a 2-Port 10GE SFP+ L2+ Manažérsky switch with 8-Port PoE+, OMADA SDN Hlavné vlastnosti 8× 2.5 Gbps portov pre WiFi 6. Zaisťujú vysokorýchlostné pripojenie. 2× 10 Gbps SFP+ sloty pre rýchle dátové prenosy a nezdieľanú prepínaciu kapacitu. Celkový výkon PoE 240 W na 8× 802.3at/af-compliant PoE+ portoch. Integrácia do Omada SDN pre jednoduché a centralizované správu siete. Statické smerovanie pre efektívnejšie využitie sieťových zdrojov. Robustná bezpečnostná stratégia vrátane IP-MAC-Port Binding, ACL, Port Security, DoS Defense a ďalších. Hardwarové špecifikácie 8× 100/1000/2500 Mbps RJ45 porty 2× 10G SFP+ sloty 1× RJ45 konzolový port 1× Micro-USB konzolový port Ventilátor: 2 Napájanie: 100-240 V AC~50/60 Hz Rozmery: 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Montáž: Rack Mountable Výkon Prepínacia kapacita: 80 Gbps Rýchlosť odovzdávania paketov: 59.52 Mpps MAC adresa: 16 K Jumbo Frame: 9 KB Bezpečnostné funkcie IP-MAC-Port Binding ACL Port Security DoS Defense 802.1X Radius Authentication Balíček obsahuje TL-SG3210XHP-M2 switch Napájací kábel Rýchly inštalačný sprievodca Súprava na montáž do racku Gumové nohy

Objav podobné ako TP-Link TL-SG3210XHP-M2 JetStream 8-Port 2.5GBASE-T a 2-Port 10GE SFP+ L2+ Manažérsky switch with 8-Port PoE+, OMADA SDN

Dokovacia stanica – pripojenie cez USB-A, ďalšie konektory: 3ks USB-A USB 3.2 Gen 2 , 1ksUSB-C , 1ksRJ-45 , 2ksHDMI , 1ksJack 3.5 mm , power delivery 85W Dokovacia stanica PORT CONNECT Dokovacia stanica 8 v 1 USB-C, USB-A, dual video, HDMI, Ethernet, audio, USB 3.0 je veľmi užitočným doplnkom notebooku. Predovšetkým u ultrabookov, ktoré disponujú skromnou výbavou, prinesie výhody mnohých konektorov a zdierok. Zvýšia využiteľnosť vášho notebooku, podporia poriadok na vašej pracovnej ploche a od pripojenej elektroniky sa s nimi odpojíte naozaj ihneď. Na samotné spojenie dokovacej stanice PORT CONNECT Dokovacia stanica 8 v 1 USB-C, USB-A, dual video, HDMI, Ethernet, audio, USB 3.0 a laptopu slúži rozhranie USB-A. Power Delivery značne urýchľuje dobíjanie. Kľúčové znaky dokovacej stanice PORT CONNECT Dokovacia stanica 8 v 1 USB-C, USB-A, dual video, HDMI, Ethernet, audio, USB 3.0 K laptopu sa dokovacia stanica PORT pripojí cez USB-A Disponuje tiež funkciou Power...

Objav podobné ako PORT CONNECT Dokovacia stanica 8 v 1 USB-C, USB-A, dual video, HDMI, Ethernet, audio, USB 3.0 (901908)

Netgear 8-Port Gigabit Ethernet Unmanaged Switch with 1 dedicated 10G/Multi-Gig Port - GS108MX Spoločnosť Netgear, ktorá stále viac vychádza v ústrety potrebám rozširujúcich sa firiem, uviedla na trh svoj najnovší nespravovaný switch, ktorý nesie označenie GS108MX. Výkonný a napriek tomu cenovo výhodný Prepínač GS108MX je energeticky úsporný, čo okrem priaznivej ceny prináša aj ďalšie úspory nákladov. Zároveň je konštruovaný tak, aby vydržal a prísne testovaný, aby poskytoval spoľahlivosť, ktorú dnešné moderné firmy potrebujú. Vlastnosti 8 x porty Gigabit Ethernet 1 x 10G/Multi-Gig port Energeticky účinný Ethernet pre maximálnu úsporu energie Tichý a výkonný, bez ventilátora Montáž na stôl alebo na stenu Maximálna spotreba energie: 5,8W Fyzické špecifikácie: Rozmery: ( š xhxv ) 236 x 101 x 27 mm Hmotnosť : 0,58 kg Záruka Obmedzená doživotná záruka na hardvér Netgear proSAFE ®. Na tento produkt je poskytovaná obmedzená doživotná záruka, ktorá platí iba v prípade, že bol zakúpený u autorizovaného predajcu spoločnosti NETGEAR, a vzťahuje sa na nemodifikovaný hardvér, ventilátory a interné napájacie zdroje - nie na softvér alebo externé napájacie zdroje, a vyžaduje registráciu produktu na adrese https://www.netgear.com/business; podrobnosti nájdete na adrese https://www.netgear.com/about/warranty. Podpora Pokročilá technická podpora ProSUPPORT 24x7 po telefóne po dobu 90 dní (vzdialená diagnostika vykonávaná našimi technickými ... Unknown localization key: "more"

Objav podobné ako Netgear 8-Port Gigabit Ethernet Unmanaged Switch with 1 dedicated 10G/Multi-Gig Port - GS108MX

Zyxel CX4800-56F, EU, 48-port 10/25G L3 Aggregation Fiber Switch with 8 100G Uplink (s 2 AC power supply) Agregácia a jadrový prepínač pripravený na budúcnosť CX4800-56F podporuje kompletnú sadu funkcií vrstvy 2, 802.1X, pre zvýšenie zabezpečenia zabránením neoprávnenému prístupu ku cloudovým zdrojom a úlohám s umelou inteligenciou, optimalizáciou šírky pásma pre vysokorýchlostné prenosy dát GPU a umožnením dynamických, izolovaných prostredí s úlohami v rozsiahlych nasadeniach s umelou inteligenciou a cloudom. Nebula, inteligentná správa cloudu Nebula ponúka komplexné možnosti monitorovania a reportingu, vrátane upozornenia na kritické udalosti v reálnom čase prostredníctvom e-mailu alebo mobilnej aplikácie. S Nebulou si môžete užiť efektívnejšiu inštaláciu a správu siete bez nutnosti dodatočných nákladov na softvérové alebo hardvérové ovládače. Dedicated Networked AV Mode The CX4800-56F vlastnosti a custom-designed networked AV mode pre standalone operation. Je podporovaný 10G Ethernet s pixel-perfect 4K60 video streaming v real-time, making it ideal pre aplikácie ranging z live events k XR and medical imaging. Leveraging AI intelligence, switch simplifies setup process automaticky configuruje všetky necessary parametre, enabling a profesionálne AVoIP deployment within minutes. Popis: Názov produktu: 48portový 10G/25G L3 agregačný optický prepínač s 8 100G uplinky Trieda prepínača: Agregácia vrstvy 3 Hustota portov Celkový počet portov: 56 10G/25G SFP28 porty: 48 ... Unknown localization key: "more"

Objav podobné ako Zyxel CX4800-56F, EÚ, 48-port 10/25G L3 Aggregation Fiber Switch with 8 100G Uplink (s 2 AC power supply)

Nabíjačka do auta – s podporou rýchleho nabíjania, celkový výkon 120 W, výstupy 2 × USB-C (max. 30 W) a 2 × USB-A (max. 30 W), integrovaný 1,5m kábel Nabíjačka do auta Baseus vám rýchlo nabije telefón či tablet. Poskytne vám rovno 4 výstupy typu USB-A a USB-C. Výkon nabíjačky Baseus sa vyšplhal na 120 W. K nabíjačke patrí aj napájací kábel s dĺžkou 1,5 m. Kábel na spojenie s telefónom či tabletom je napevno, nehrozí vám tak jeho strata. Rozhodujúce parametre nabíjačky Baseus multi-port Fast charging car charger with extension cord 120 W 2U + 2C Gray Praktická nabíjačka vhodná do auta Na nabíjanie slúžia 4 výstupy Na výstupe bude mať rozhranie USB-A a USB-C Celkový výkon nabíjačky bude plných 120 W Napevno pripevnený kábel Kábel v balení disponuje dĺžkou 1,5 m Farba nabíjačky Baseus multi-port Fast charging car charger with extension cord 120 W 2U + 2C Gray: sivá

Objav podobné ako Baseus multi-port Fast charging car charger with extension cord 120 W 2U + 2C Gray (CCBT-A0G)

PORT dokovacia stanica 8v1 USB-C, USB-A, dual video, HDMI, Ethernet, audio, USB 3.0 EAN: 3567049019082 Popis produktu PORT dokovacej stanice prináša možnosť pripojiť až 8 periférií cez jeden port USB-C/USB-A. Ponúka tiež napájanie s výkonom až 85W. Špecifikácia 2x HDMI porty (2K - HDMI 1.4 1080p) 1x Gigabit Ethernet 10/100/1000 Mbps 3x porty USB-A 3.1 Gen 1 1x USB-C (F) nabíjací port 1x kombinovaný jack zvukového vstupu/výstupu Dizajn a kompatibilita Praktický dizajn je prispôsobený na stolné a mobilné použitie. Kompatibilný s PC a MAC. Obsah balenia Dokovacia stanica USB-C a USB-A s duálnym videom Duálny kábel USB-C a USB-A Užívateľský manuál 85W Napájací adaptér Technické detaily ROZMERY VÝROBKU: 9,5 x 9,5 x 3,3 cm HMOTNOSŤ VÝROBKU: 180 g ROZMERY BALENIA: 17 x 18,5 x 10 cm HMOTNOSŤ BALENIA: 1050 g MATERIÁL: PC + ABS

Objav podobné ako PORT dokovacia stanica 8v1 USB-C, USB-A, dual video, HDMI, Ethernet, audio, USB 3.0

HARDWAROVÉ VLASTNOSTI Rozhranie • 48× 10/100/1000 Mbps RJ45 porty (Auto-Negotiation/Auto MDI/MDIX) • 4× 100/1000 Mbps SFP sloty • 1× RJ45 Console Port • 1× Micro-USB Console ventilátora Fyzický bezpečnostný zámok ? Zdroj napájania 100-240 V AC ~ 50/60 Hz Rozmery (Š x H x V) 17,3×8,7×1,7 palca (440×220×44 mm) Montáž Montáž do racku Maximálna spotreba energie 34.86 W ( 220 V/ 50 Hz) Maximální odvod tepla 118.94 BTU/h (220 V / 50 Hz) VÝKON Přepínací kapacita 104 Gbps Rychlost přeposílání paketů 77,38 Mpps Tabulka MAC adres 16 K Paměť vyrovnávací paměti paketů 12 Mbit Jumbo rám 9 kB SOFTWAROVÉ FUNKCE Kvalita služieb • 8 prioritných frontov • Priorita 802.1p CoS/DSCP • Plánovanie frontov: SP (Strict Priority), WRR (Weighted Round Robin), SP+WRR • Riadenie šírky pásma: Obmedzenie hodnotenia podľa portu/toku • Hladší výkon • Akcia pre toky : QoS poznámka (802.1P poznámka, DSCP poznámka) Funkcia L2 a L2+ • 32 rozhranie IP: Podpora rozhrania IPv4/IPv6 • Statické smerovanie: 48 statických smerovaní IPv4/IPv6 • Statické ARP: 128 statických záznamov • 316 záznamov ARP • Proxy ARP • Bezplatná ARP • Server DHCP • Prenos DHCP: Prenos rozhrania DHCP, DHCP VLAN Relay • DHCP L2 Relay • Link Aggregation • Spanning Tree Protocol ... Unknown localization key: "more"

Objav podobné ako TP-Link SG3452 Omada 48-Port Gigabit L2+ Managed Switch with 4 SFP Slots

Akrylový expander do ucha, špirála čiernej farby s bielym vzorom - zebra, hviezda, cik cak.

Objav podobné ako Čierny vzorovaný expander do ucha z akrylu, slimák - Hrúbka: 3 mm, Tvar hlavičky: Zebra

Akrylový expander do ucha, špirála čiernej farby s bielym vzorom - zebra, hviezda, cik cak.

Objav podobné ako Čierny vzorovaný expander do ucha z akrylu, slimák - Hrúbka: 5 mm, Tvar hlavičky: Zebra

Akrylový expander do ucha, špirála čiernej farby s bielym vzorom - zebra, hviezda, cik cak.

Objav podobné ako Čierny vzorovaný expander do ucha z akrylu, slimák - Hrúbka: 8 mm, Tvar hlavičky: Zebra

PORT dokovacia stanica 8v1, USB-C/A, 2x 2K, dual video, HDMI, Ethernet, 3,5 mm jack Univerzálna dokovacia stanica pre notebook s výkonom až 100W. Kompatibilný s USB-A a USB-C. Dizajn a kompatibilita Praktický dizajn prispôsobený na stolné aj mobilné použitie. Kompatibilný s PC, Mac a Chrome. Pripojenie periférií Pripojte až 8 periférií cez jeden port: 2x HDMI, 1x Ethernet, 4x USB 3.1, 1x audio jack, 1x USB-C 3.1. Špeciálne funkcie Funkcia PXE boot & Wake On LAN Tlačidlo ON/OFF Softvér pre jednoduchú správu monitora SMI Špecifikácia 2x HDMI: 1x (1920x1080 @ 60Hz), 1x (3840x2160 @ 30Hz) 1x Ethernet LAN Network: Gigabit Ethernet 10/100/1000 Mbps 4x USB-A 3.1 Gen1 z toho 1x BC1.2 Fast Charge 1x USB-C (F) nabíjací port: Podporuje ďalšie USB-C zariadenia / napájanie: 5/9/15 / 20V / Max.100W 1x kombinovaný jack zvukového vstupu/výstupu Rozmery a hmotnosť 12,8 x 12,8 x 5,0 cm / 828g Obsah balenia Kancelárska dokovacia stanica USB-C a USB-A s duálnym videom Duálny kábel USB-C a USB-A Užívateľský manuál Napájací adaptér

Objav podobné ako PORT dokovacia stanica 8v1, USB-C/A, 2x 2K, dual video, HDMI, Ethernet, 3, 5mm jack

Zyxel XGS1250-12 v2: 12-port Gigabit webmanaged Desktop Switch Kód produktu: 4718937634453 Základná špecifikácia Porty: 8 x RJ-45 10/100/1000 Mbps, 3 x RJ-45 100M/1G/2.5G/5G/10G, 1 x SFP+ Resetovanie: Hardvérové tlačidlo pre resetovanie Výkon a pamäť Prepínacia kapacita: 96 Gb/s Rýchlosť prepínania: 71.42 Mpps Tabuľka adres MAC: 16 K Vyrovnávacia pamäť paketov: 1.5 MB Podpora Jumbo rámcov: do 12 KB Funkcia a kompatibilita Webová správa Automatické MDI/MDIX vo všetkých portoch Systémové heslo VLAN (Port supported) Port-based QoS 802.1p QoS Riadenie búrky vysielania Detekcia/prevencia smyčky DHCP klient Statická agregácia spojov Zrkadlenie portov Priorita WRR (Weighted Round Robin) QoS Kompatibilita s IGMP snooping v1/v2/ a v3 Podporované skupiny multicast: 128 Podpora Zyxel One Network (ZON Utility)

Objav podobné ako Zyxel XGS1250-12 v2, 12-Port Gigabit webmanaged Desktop Switch with 8 port 1G + 3-Port MultiGig 1/2.5/5/10G + 1-Port SFP

TP-Link SG3428XF Omada - výkonný spravovaný switch TP-Link SG3428XF Omada je spravovaný switch, ktorý ponúka vysokú prepínaciu kapacitu a široké možnosti konfigurácie. Hardwarové špecifikácie Switch disponuje 20× Gigabit SFP slotmi, 4× Gigabit Combo SFP/RJ45 portami, a 4× 10G SFP+ slotmi. Na ovládanie slúži RJ45 Console Port a Micro-USB Console Port. Na chladenie je vybavený jedným ventilátorom. Napájanie zaisťujú duálne redundantné napájacie zdroje s napätím 100-240 V AC~50/60 Hz. Switch je možné montovať do racku. Jeho rozmery sú 17,3×8,7×1,7 palca (440×220×44 mm). Výkon a kapacita Prepínacia kapacita switchu je 128 Gbps a rýchlosť preposielania paketov dosahuje 95,23 Mpps. Switch disponuje tabuľkou MAC adries o veľkosti 16 K a pamäťou vyrovnávacej pamäte paketov o veľkosti 12 Mbit. Maximálna veľkosť Jumbo rámov je 9 kB. Softvérové funkcie Switch ponúka 8 prioritných frontov pre riadenie kvality služieb. Ďalej podporuje 128 rozhraní IP vrátane IPv4/IPv6, 48 statických smerovaní IPv4/IPv6 a 128 statických záznamov ARP. Switch tiež disponuje funkciami pre multicast, vrátane podpory 1000 (IPv4, IPv6) skupín IGMP a 256 profilov multicastového filtrovania. Pokročilé funkcie Switch je vybavený pokročilými funkciami pre správu siete, vrátane automatického zisťovania zariadenia, dávkovej konfigurácie a dávkovej aktualizácie firmvéru. Ďalej ponúka inteligentné monitorovanie siete a varovanie nad abnormálnymi udalosťami. Bezpečnostné funkcie Switch ... Unknown localization key: "more"

Objav podobné ako TP-Link SG3428XF Omada 24-Port SFP L2+ Managed Switch with 4 10GE SFP+ Slots

D-Link DGS-1250-52X je L2/L3 Gigabit Smart Managed switch osadený 48 portami 10/100/1000Base-T RJ-45 a 4 dvojrýchlostnými 1G/10G SFP+ portami pre uplink alebo pre pripojenie serverov, s podporou Gigabit SFP+ transceiverov. Séria DGS-1250 disponuje komplexnou sadou L2 funkcií (napr. VLAN, detekcia slučiek, agregácia liniek, zrkadlenie portov, Spanning Tree protokoly STP/RSTP/MSTP, IGMP/MLD Snooping atď.) a L3 statickým routingom (4 IP interfaces, max. 124/50 IPv4/IPv6 statických záznamov v tabuľke). Bezpečnostné funkcie (ACL, 802.1x, MAC Security, IP-MAC-Port binding atď.) a funkcie riadenia kvality služieb QoS zaisťujú spoľahlivú prevádzku siete). Správa prepínača je cez webové rozhranie alebo pomocou SNMP príkazov. Pre kamerové systémy je určený Surveillance Mode režim webového rozhrania a funkcie Auto-Surveillance VLAN pre automatické priradenie prvkov kamerových systémov do oddelenej VLAN s vyššou prioritou. Pre centrálnu správu siete je k dispozícii bezplatný SW nástroj D-Link Network Assistant (DNA) a pokročilá platforma D-View7. Séria DGS-1250 je cenovo efektívne 10G riešenie ako chrbticové switche pre malé a stredné firmy (SMB) alebo ako prístupové switche v podnikových (Enterprise) sieťach. Na switche DGS-1250 je záruka 5 rokov. Pri registrácii výrobku do Samoobslužného portálu (na www.dlink.com, sekcia "Podpora" -> "Potrebujete pomoc?") do 30 dní od zakúpenia potom výrobca poskytuje tzv. obmedzenú doživotnú záruku, ktorá končí 5 rokov po ... Unknown localization key: "more"

Objav podobné ako D-Link DGS-1250-52X, 48-port Gigabit Smart Managed Switch with 4x 10G SFP+ ports

Zyxel XMG1930-30HP, 24-port 2.5GbE Smart Managed Layer 2 PoE 700W 22xPoE+/8xPoE++ Switch with 4 10GbE and 2 SFP+ Uplink EAN: 4718937622078 Prehľad parametrov Zyxel XMG1930-30HP je výkonný 24-portový 2.5GbE spravovaný switch s podporou PoE++/PoE+ a 6 10G uplink porty. Porty 24x 100M/1G/2.5G Ethernet (RJ-45) 4x 1G/2.5G/5G/10G Ethernet (RJ-45) 2x 1G SFP/10G SFP+ PoE 22x PoE+ 8x PoE++ Celkový PoE rozpočet: 700W Výkon Switch ponúka prepínaciu kapacitu 240 Gbps a rýchlosť odovzdávania 178.5 Mpps. Technické špecifikácie Paketový buffer: 2 MB MAC adresa: 16 K Jumbo frame: 12 K L3 smerovacia tabuľka: 512/512 Flash/RAM: 32 MB/256 MB Napájanie Switch je napájaný zo siete 100 - 240 V AC, 50/60 Hz. Spotreba Maximálna spotreba prístroja je 864.1W. Fyzické špecifikácie Switch má rozmery 441 x 330 x 44 mm a váži 4.85 kg. Dodávané príslušenstvo Sieťový kábel Napájací adaptér Montážna sada do racku Ochrana Switch je vybavený ochranou proti prepätiu a elektrostatickému výboju. Špecifikácia ochrany Ochrana Ethernet portu: 2 KV Ochrana napájacieho zdroja: Line-GND: 6 KV, Line-Line: 6 KV Ochrana Ethernet portu ESD: 8 KV/4 KV Prevádzkové podmienky Switch je určený na prevádzku v teplotách od -20°C do 50°C a vlhkosti 5% až 95% (bez kondenzácie).

Objav podobné ako Zyxel XMG1930-30HP, 24-port 2.5GbE Smart Managed Layer 2 PoE 700W 22xPoE+/8xPoE++ Switch with 4 10GbE and 2 SFP+ Uplink