ram mounts kruhovy adapter s amps vzorom dier s gulovym capom 1 5 ram 202u

RAM Mounts Kruhový Adaptér s AMPS Vzorom Dier s Guľovým Čapom 1,5" EAN produktu: 793442001239 Popis produktu Adaptér RAM-202U je univerzálne riešenie pre pevné pripevnenie držiakov na rovné plochy. S priemerom 6,35 cm a 1,5" guľovým čapom je ideálny pre inštaláciu na palube lode, boardu kajaku alebo palubnej doske nákladného auta. Použitie Adaptér je určený pre prepojenie držiakov RAM s ramenami pre 1,5" čapy. Je ideálny pre ťažšie univerzálne držiaky pre veľké tablety. Vlastnosti Kompatibilita: Kompatibilný so systémom ramien a úchytov RAM mount Štandard: Zodpovedá štandardu AMPS Záruka: Doživotná záruka od výrobcu RAM mount Materiál: Povlakovaná zliatina hliníka Veľkosť guľového čapu: 1,5", gumový, veľkosti "C" Váha: 68 g

Objav podobné ako RAM Mounts kruhový adaptér s AMPS vzorom dier s guľovým čapom 1,5", RAM-202U

RAP-B-202U kruhový adaptér/úchyt na rovné povrchy s 1\" čapom. Adaptér má priemer 6,35 cm a má predvŕtaných 7 dier, z toho 4 podľa priemyselného vzoru dier AMPS. Použitie: ako adaptér s 1\" čapom pre prepojenie držiakov RAM s ramenami pre 1\" čapy. Najmä sa používa k ťažším univerzálnym držiakom pre veľké tablety. Pre všetky ostatné držiaky sa používa lichobežníkový adaptér RAP-B-238U ako úchyt na rovné povrchy s 1\" čapom. Je určený na pevné nerozoberateľné pripevnenie držiaka na rovnú plochu. Typicky pomocou skrutiek na vhodné miesto palubnej dosky nákladného auta, na palubu lode, board kajaku atď. Prednosti adaptéra: Kompatibilný so systémom ramien a úchytov RAM mount Zodpovedá štandardu AMPS Doživotná záruka RAM mount „, gumový, veľkosti „B“ Poznámka: „„U““ v čísle dielu znamená, že výrobok je balený v PU sáčku.

Objav podobné ako RAM Mounts kruhový adaptér/úchyt na rovné povrchy s AMPS vzorom dier, s čapom 1", plast, RAP-B-202U

RAM Mounts držiak VESA 75x75 mm, s 1,5" guľovým čapom, RAM-2461U EAN: 793442024610 Prehľad Držiak VESA 75x75 mm s 1,5" guľovým čapom. Štvorcová doštička držiaka s rozmermi 92x92 mm. Čap umiestnený 22 mm od stredu hrany. Použitie VESA 75x75 držiak pre LCD monitory, priemyselné PC, terminály atď. Úchyt na rovnú plochu so širokou podstavou pre rad "C" ramien a držiakov RAM s 1,5" čapy. Prednosti Kompatibilný so systémom ramien a úchytov RAM mount radu "C". Zodpovedá štandardu VESA 75x75. Dokonalé spracovanie. Doživotná záruka RAM mount. Špecifikácia Materiál: Povlakovaná zliatina hliníka Váha: 182 g Veľkosť guľového čapu: 1,5", gumový, veľkosti "C" Poznámka: "U" v čísle dielu znamená, že výrobok je balený v PU sáčku.

Objav podobné ako RAM Mounts držiak VESA 75x75 mm, s 1,5" guľovým čapom, RAM-2461U

RAM Mounts dokovacia stanica s VESA uchytením
univerzálna nabíjacia dokovacia stanica RAM Mounts
RAM Mounts nabíjacia stanica pre Honeywell RT10
upevnenie RAM Mounts pre Honeywell RT10
univerzálny držiak RAM Mounts do auta
RAM Mounts držiak s dvojitým otočným ramenom
montáž 2-otvorový AMPS pre CT40/45/47
AMPS a VESA montáž pre Getac ZX10
AMPS pripojenie pre vozidlový držiak
univerzálny vozidlový držiak s AMPS
kruhová mozaika grey
sprchové rameno s kruhovou armatúrou
tesa Deluxxe kruhový vešiak na uteráky
dvojvrstvová kapucňa s gombíkovými dierkami
zlatý prívesok s kruhovou kontúrou
Prada PR 57YS 1BC07D dierky na čiapku

RAM Mounts X-Grip Univerzálny Držiak pre Veľké Telefóny EAN: 793442940873 Popis produktu Univerzálny držiak X-Grip je navrhnutý pre bezpečné uchytenie mobilných telefónov a smartfónov s veľkosťou väčšou ako 5". Bezpečnosť a pohodlie Držiak je vybavený pružinovým mechanizmom a gumovou podložkou, ktoré zaisťujú bezpečnosť a pohodlie vášho telefónu. Zaisťovacia guma Súčasťou balenia je zaisťovacia guma, ktorá zabraňuje vypadnutiu telefónu aj v extrémnych podmienkach. Rozsah držiaka Šírka telefónu: 44 - 114 mm Hrúbka telefónu: do 22 mm Overte si, že rozmery vášho telefónu sú menšie ako rozsah držiaka. Materiál Držiak je vyrobený z nerez ocele, povlakovanej zliatiny hliníka a vysokopevnostného plastu. Veľkosť guľového čapu Guľový čap má priemer 1" a je kompatibilný so všetkými "B" veľkosťami RAM mount ramien. Váha Držiak váži 114 g. Prednosti držiaka XGrip Bezpečne drží telefón aj pri vibráciách Univerzálna pre telefóny v puzdre aj bez Rýchle a jednoduché upevnenie a vybratie telefónu Kompatibilný so systémom ramien a úchytov RAM mount Nehrdzavejúci Doživotná záruka RAM mount Upozornenie X-Grip je časť trojdielneho riešenia. Okrem tohto držiaka potrebujete ešte rameno a úchyt na zostavenie celého riešenia.

Objav podobné ako RAM Mounts X-Grip univerzálny držiak na veľké telefóny s 1" guľovým čapom, RAM-HOL-UN10BU

RAM Mounts GDS Uni-Conn je pružinová dokovacia stanica navrhnutá pre zariadenia v IntelliSkin prípadoch s Uni-Conn adaptérom. Zabezpečuje bezpečné uchytenie a rýchle nabíjanie cez pogo piny s USB-C pripojením. Obsahuje aj USB-A port pre periférne zariadenia.

• Univerzálna dokovacia stanica s pružinovým mechanizmom pre rýchle a bezpečné uchytenie.
• Podpora rýchleho nabíjania cez integrované pogo piny s USB-C vstupom a výkonom 15W.
• Dodatočný USB-A port pre pripojenie periférneho zariadenia (napr. myš alebo klávesnica).
• Jednoduchá inštalácia a kompatibilita s IntelliSkin prípadmi a Uni-Conn adaptérom.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

RAM Mounts NPT Adapter with C-Ball (1.5") - 1/2" NPT Female Thread, in Poly Bag

Objav podobné ako RAM Mounts NPT Adapter

RAM Mounts Closure Adapter for D-Ball (2.25 Inch) Link Arms, in Poly Bag

Objav podobné ako RAM Mounts Closure Adapter

RAM Mounts Hole Adapter for VESA Plates (-246U) - Set of 4, Composite

Objav podobné ako RAM Mounts Hole Adapter

RAM Mounts rameno krátke, kovové, pre 1" guľové čapy EAN: 793442120114 Detaily produktu Vyrobené z: Povlakované zliatiny hliníka. Dĺžka: Celková dĺžka je 60,5 mm. Upínanie a kompatibilita Ručné upínanie pre jednoduchú manipuláciu. Kompatibilný s 1" guľovými čapmi. Priestor medzi svorkami 44,5 mm priestoru medzi svorkami na optimálne uchytenie. Prečo si vybrať RAM Mounts? Odolné a spoľahlivé riešenie na uchytenie. Jednoduché ovládanie vďaka ručnému upínaniu. Kompatibilný so širokou škálou zariadení.

Objav podobné ako RAM Mounts rameno krátke, kovové, pre 1" guľové čapy (celková dĺžka 60 mm), RAM-B-201U-A

Tento RAM Mounts GDS Tough-Dock držiak s kľúčovým zámkom je určený pre Samsung Tab A9+ v IntelliSkin Next Gen ochrannom obale. Držiak nabíja tablet cez USB-C konektor a poskytuje USB-A port pre pripojenie periférií. Spodná časť držiaka je prispôsobená na pripevnenie na guľovú základňu.

• Bezpečné pripevnenie tabletu pomocou kľúčového zámku
• Nabíjanie tabletu cez USB-C konektor s výkonom 15W
• Podpora periférnych zariadení cez USB-A port
• Jednoduchá inštalácia a vyberanie tabletu

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

RAM Mounts Universal Vehicle Mount je univerzálny držiak určený pre montáž do vozidiel. Skladá sa z vozidlovej základne, dvojitého otočného ramena a využíva štandardné AMPS pripojenie. Umožňuje bezpečné a prispôsobiteľné umiestnenie rôznych elektronických zariadení počas jazdy.

• Univerzálna kompatibilita s rôznymi zariadeniami
• Dvojité otočné rameno pre maximálnu prispôsobiteľnosť
• Odolná konštrukcia z kvalitných materiálov
• Jednoduchá inštalácia a nastavenie

Objav podobné ako RAM Mounts Universal Vehicle Mount

Dokovacia stanica RAM Mounts Form-Fit je navrhnutá špecificky pre tablet Getac ZX10. Poskytuje napájanie a dátové pripojenie cez duálne USB-A porty. Ponúka flexibilné montážne možnosti vďaka kompatibilite s AMPS a VESA štandardmi.

• Poskytuje spoľahlivé napájanie a dátové pripojenie cez duálne USB-A porty
• Univerzálne uchytenie kompatibilné s 4-dierovým AMPS a VESA štandardom
• Špeciálne navrhnutá pre dokonalé prispôsobenie tabletu Getac ZX10
• Robustná konštrukcia vhodná pre profesionálne a náročné prostredia

Objav podobné ako RAM Mounts Form-Fit Docking Station

RAM Mounts Charging Dock je nabíjacia stanica navrhnutá pre tablety Honeywell RT10. Ponúka dvojité USB-A výstupy a 5.5 mm jack vstup na napájanie. Je kompatibilná s VESA 75x75 upevnením pre flexibilnú inštaláciu.

• Dvojité USB-A porty pre súčasné nabíjanie viacerých zariadení
• Kompatibilita s VESA 75x75 štandardom pre jednoduchú inštaláciu
• Špecificky navrhnutá pre robustné tablety Honeywell RT10
• 5.5 mm jack vstup pre spoľahlivé napájanie

Objav podobné ako RAM Mounts Charging Dock

RAM Mounts nabíjacia stanica je určená pre ručné terminály Honeywell CT40, CT45 a CT47. Ponúka uzamykateľnú konštrukciu, vstup 5.5 mm jack a USB-A výstup. Upevňuje sa pomocou štandardného 2-otvorového AMPS systému.

• Uzamykateľná konštrukcia pre bezpečné nabíjanie
• Univerzálna kompatibilita s radom Honeywell CT40/45/47
• Jednoduchá inštalácia pomocou 2-otvorového AMPS upevnenia
• Praktický USB-A výstup pre flexibilné napájanie

Objav podobné ako RAM Mounts Charging Station

RAM Mounts adaptér s AMPS vzorom dier Adaptér RAM Mounts je vyrobený z povlakovanej zliatiny hliníka a je vybavený 1" gumovým čapom veľkosti "B". Výhodný a univerzálny Adaptér je kompatibilný so systémom ramien a úchytov RAM mount. Zodpovedá štandardu AMPS a poskytuje doživotnú záruku RAM mount. Použitie adaptéra Adaptér slúži ako úchyt na rovné povrchy s 1" čapom. Je určený pre pevné nerozoberateľné pripevnenie držiaka na rovnú plochu. Pripevnenie na palubnú dosku nákladného auta Pripevnenie na palubu lode Pripevnenie na board kajaku Adaptér tiež slúži ako prepojenie držiakov RAM s ramenami pre 1" čapy, najmä pre ťažšie univerzálne držiaky pre veľké tablety. Technické informácie Adaptér má priemer 6,35 cm a je vybavený 7 predvŕtanými dierami, z ktorých 4 zodpovedajú priemyselnému vzoru dier AMPS. Jeho hmotnosť je 68 g. Kovový verzus plastový diel RAM mount garantuje pre plastové aj kovové diely rovnaké pevnostné parametre. Sú plne zameniteľné. Výhodou plastových dielov je nižšia hmotnosť a cena, zatiaľ čo kovové diely ponúkajú prémiový vzhľad.

Objav podobné ako RAM Mounts adaptér, kovový, AMPS vzor dier, čap 1"

RAM Mounts X-Grip univerzálny držiak na mobilný telefón EAN: 793442932298 Popis produktu RAM Mounts X-Grip je univerzálny držiak na mobilný telefón s 1" guľovým čapom. Skladá sa z pružinového mechanizmu, ktorý bezpečne udrží váš telefón. Držiak je doplnený zaisťovacou gumou pre maximálne bezpečie vášho zariadenia. Špecifikácia Šírka telefónu: 48 – 83 mm Hrúbka telefónu: do 22 mm Materiál: Nerez oceľ, povlakovaná zliatina hliníka, vysokopevnostný plast Váha: 100 g Veľkosť guľového čapu: 1", gumový, veľkosti „B“ Výhody produktu Držiak X-Grip ponúka bezpečné uchopenie telefónu aj pri vibráciách. Je univerzálny a kompatibilný so systémom ramien a úchytov RAM mount. Ponúka rýchle a jednoduché upevnenie aj vybratie telefónu. Je nehrdzavejúci a dodáva sa s doživotnou zárukou RAM mount. Upozornenie: X-Grip je súčasťou trojdielneho riešenia. Na zostavenie celého riešenia potrebujete okrem tohto držiaka ešte rameno a úchyt.

Objav podobné ako RAM Mounts X-Grip univerzálny držiak na mobilný telefón s 1" guľovým čapom

RAM Mounts Pod I Seat Rail Adapter with AMPS Connection - Flexible Rod (Approx. 450mm), Round Base Plate, B-Ball (1 Inch), in Poly Bag

Objav podobné ako RAM Mounts Pod I Seat Rail Adapter with AMPS Connection

RAM Mounts Prísavka s 1" čapom Priemer: 70 mm Váha: 91 g Veľkosť guľového čapu: Priemer 1", veľkosť "B", gumový Použitie a montáž Úchyt na sklo a akékoľvek rovné, hladké a neporézne plochy. Vhodný pre malú elektroniku - mobilné telefóny, GPS navigácie, iPhone, iPod, GoPro kamery atď. aj v náročnom vibrujúcom prostredí. Jednoduchá a rýchla montáž pomocou zámku. Materiál Vysokopevnostný plast a guma Upozornenie "U" v čísle dielu znamená, že výrobok je balený v PU sáčku. Ďalšie informácie Na upevnenie držiaka s prísavkou na akýkoľvek iný povrch ako sklo, napríklad na palubnú dosku, použite samolepiacu podložku.

Objav podobné ako RAM Mounts vysoko kvalitná prísavka s priemerom 70 mm s 1" čapom

RAM svorka s ručným upínaním pre priemer 15,9 - 38,1 mm s 1" čapom sa dokonale hodí pre rýchle upnutie vášho zariadenia napríklad na riadidlá motocykla, barany v kokpite lietadla, sedlovku bicykla, madlá na kajaku atď. Bezpečne udrží napríklad mobilný telefón, GPS navigáciu, GPS navigáciu, GPS navigáciu chránia povrch pred poškodením a zaisťujú stabilitu. Čeľuste svorky sú navrhnuté pre guľaté, ploché aj nerovné povrchy. Pre priemer tyče: 0 – 28,9 mm Kompatibilný so systémom ramien a držiakov RAM mount Doživotná záruka RAM mount Materiál: Vysokopevnostný plast Nerez oceľ Veľkosť guľového čapu: Priemer 1\", veľkosť „B", gumový Váha: 159 g Poznámka: „U“ v čísle dielu znamená, že výrobok je balený v PU sáčku.

Objav podobné ako RAM Mounts Tough-Claw malá svorka s ručným upínaním pre priemer 15,9-38,1 mm, s 1" čapom, RAP-B-400U

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CD2U: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & Dual USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CD2U: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C & Dual USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Rechts) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-C port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-C (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CP-CU holder ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPDU holder ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Key locking Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock mit Schlüsselverriegelung - 2-Hole AMPS Pattern - USB-C Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CD2U: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & Dual USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5 - 12V ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-C port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C & USB-C (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V-12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CP-CU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPDHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPHU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Rechts) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C Ausgangsleistung: 15W Ausgangsspannung: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power Output: 15W Output voltage: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product dimensions: Overall Width: 8,02 ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V-12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPU holder is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn Snap-In Docking Station is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCK-U3CPU: Only compatible with IntelliSkin and Rear Pogo-Pads Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 60W max Output voltage: 5 - 20V @ 3A max Input Cable Length: ca. 800 mm Weight: ca. 150 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Powered Snap-In Dock - USB-C Connector - 2-Hole AMPS

The RAM Mounts GDS Uni-Conn Snap-In Docking Station is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCK-U3EU: Only compatible with IntelliSkin Thin-Case and Rear Pogo-Pads Snap-In function Easy insertion and removal Charging function Input Connector: JST / RJ45 (Ethernet) Connector Power Output: 20W max Output Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @1.67A Input Cable Length: ca. 800 mm Includes PoE to PD Charging Module Weight: ca. 226 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Powered Snap-In Dock - 2-Hole AMPS Pattern - RJ45 Connector - PoE to PD Charging Modul - Screw Set

The RAM Mounts GDS Uni-Conn Snap-In Docking Station with Key-Locking (Left) is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U3CPU: Only compatible with IntelliSkin and Rear Pogo-Pads Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 60W max Output voltage: 5 - 20V @ 3A max Input Cable Length: ca. 800 mm Weight: ca. 150 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Powered Snap-In Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Snap-In Docking Station with Key-Locking (Rechts) is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U3CPU: Only compatible with IntelliSkin and Rear Pogo-Pads Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 60W max Output voltage: 5 - 20V @ 3A max Input Cable Length: ca. 800 mm Weight: ca. 150 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open ... Unknown localization key: "more"

Objav podobné ako RAM Mounts GDS Uni-Conn Powered Snap-In Dock with Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

This GDS Uni-Conn adapter is designed for selected IntelliSkin protective sleeves to make them compatible with the Uni-Conn system. The octagon-shaped adapter is easy to install before inserting the device into the protective sleeve. When it's time to upgrade your device fleet, simply replacing the IntelliSkin protective sleeve is all that’s needed. With its high compatibility, this adapter provides a reliable solution for seamless device integration into the Uni-Conn system. Product features RAM Mounts RAM-GDS-U1U-GRY: Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case series Easy insertion and removal Screw Set included Additional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as: Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+. For these device models, the adjustable adapter RAM-GDS-U1AU is recommended. Devices shown are not included in the delivery. Only the RAM-GDS-U1U-GRY adapter is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Adapter for IntelliSkin Protective Sleeves - Screw Set - Grey

The GDS Hand-Stand with Uni-Conn Adapter is a high-quality accessory for the Uni-Conn system that significantly improves tablet usability on flat surfaces.Designed for professional use in mobile environments, the Hand-Stand allows for stable positioning of the device, ensuring convenient and ergonomic operation.The Uni-Conn adapter is installed before inserting the tablet into the IntelliSkin protective sleeve.The result is a reliable and secure stand without compromising the mobility or protection of the device.Product features RAM Mounts RAM-GDS-U1HSKU:Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case seriesIncl. Uni-Conn AdapterEasy installationAdditional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as:Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+.Devices shown are not included in the delivery.Only the RAM-GDS-U1HSKU adapter is supplied.

Objav podobné ako RAM Mounts GDS Hand-Stand with Uni-Conn Adapter for IntelliSkin Next Gen Cases - Hard- and Thin-Case Series - Screw-Set - Gray

The GDS Hand-Stand with Uni-Conn Adapter is a high-quality accessory for the Uni-Conn system that significantly improves tablet usability on flat surfaces.Designed for professional use in mobile environments, the Hand-Stand allows for stable positioning of the device, ensuring convenient and ergonomic operation.The Uni-Conn adapter is installed before inserting the tablet into the IntelliSkin protective sleeve.The result is a reliable and secure stand without compromising the mobility or protection of the device.Product features RAM Mounts RAM-GDS-U1HSKU:Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case seriesIncl. Uni-Conn AdapterEasy installationAdditional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as:Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+.Devices shown are not included in the delivery.Only the RAM-GDS-U1HSKU adapter is supplied.

Objav podobné ako RAM Mounts GDS Hand-Stand with Uni-Conn Adapter for IntelliSkin Next Gen Cases - Hard- and Thin-Case Series - Screw-Set - Gray

RAM Mounts Double Ball Adapter - C-Ball (1.5 inches), in a poly bag

Objav podobné ako RAM Mounts Double Ball Adapter

RAM Mounts Double Ball Adapter - B-Ball (1 inch), approx. 64 mm long

Objav podobné ako RAM Mounts Double Ball Adapter

RAM Mounts Adapter Plate for Monitors & Keyboards - approx. 278 mm long, VESA & AMPS hole grid

Objav podobné ako RAM Mounts Adapter Plate