ram mounts closure adapter

RAM Mounts Closure Adapter for D-Ball (2.25 Inch) Link Arms, in Poly Bag

Objav podobné ako RAM Mounts Closure Adapter

RAM Mounts Kruhový Adaptér s AMPS Vzorom Dier s Guľovým Čapom 1,5" EAN produktu: 793442001239 Popis produktu Adaptér RAM-202U je univerzálne riešenie pre pevné pripevnenie držiakov na rovné plochy. S priemerom 6,35 cm a 1,5" guľovým čapom je ideálny pre inštaláciu na palube lode, boardu kajaku alebo palubnej doske nákladného auta. Použitie Adaptér je určený pre prepojenie držiakov RAM s ramenami pre 1,5" čapy. Je ideálny pre ťažšie univerzálne držiaky pre veľké tablety. Vlastnosti Kompatibilita: Kompatibilný so systémom ramien a úchytov RAM mount Štandard: Zodpovedá štandardu AMPS Záruka: Doživotná záruka od výrobcu RAM mount Materiál: Povlakovaná zliatina hliníka Veľkosť guľového čapu: 1,5", gumový, veľkosti "C" Váha: 68 g

Objav podobné ako RAM Mounts kruhový adaptér s AMPS vzorom dier s guľovým čapom 1,5", RAM-202U

RAP-B-202U kruhový adaptér/úchyt na rovné povrchy s 1\" čapom. Adaptér má priemer 6,35 cm a má predvŕtaných 7 dier, z toho 4 podľa priemyselného vzoru dier AMPS. Použitie: ako adaptér s 1\" čapom pre prepojenie držiakov RAM s ramenami pre 1\" čapy. Najmä sa používa k ťažším univerzálnym držiakom pre veľké tablety. Pre všetky ostatné držiaky sa používa lichobežníkový adaptér RAP-B-238U ako úchyt na rovné povrchy s 1\" čapom. Je určený na pevné nerozoberateľné pripevnenie držiaka na rovnú plochu. Typicky pomocou skrutiek na vhodné miesto palubnej dosky nákladného auta, na palubu lode, board kajaku atď. Prednosti adaptéra: Kompatibilný so systémom ramien a úchytov RAM mount Zodpovedá štandardu AMPS Doživotná záruka RAM mount „, gumový, veľkosti „B“ Poznámka: „„U““ v čísle dielu znamená, že výrobok je balený v PU sáčku.

Objav podobné ako RAM Mounts kruhový adaptér/úchyt na rovné povrchy s AMPS vzorom dier, s čapom 1", plast, RAP-B-202U

RAM Mounts dokovacia stanica s VESA uchytením
univerzálna nabíjacia dokovacia stanica RAM Mounts
RAM Mounts nabíjacia stanica pre Honeywell RT10
upevnenie RAM Mounts pre Honeywell RT10
univerzálny držiak RAM Mounts do auta
RAM Mounts držiak s dvojitým otočným ramenom
napájací adaptér pre výrobky Sanela
tesa ekkro wc kefa adaptér bk20
adaptér bk20 pre wc držiak
predlžovací adaptér pre sprchovú hlavicu
tesa elegaant adaptér BK20
adaptér Hansa Electra 64490900
vstup 100-240 V adaptér
tesa smooz lepidlo adaptér BK20
batériový adaptér 4x AA napájanie
adaptér pre fontánu VEGA

RAM Mounts NPT Adapter with C-Ball (1.5") - 1/2" NPT Female Thread, in Poly Bag

Objav podobné ako RAM Mounts NPT Adapter

RAM Mounts Hole Adapter for VESA Plates (-246U) - Set of 4, Composite

Objav podobné ako RAM Mounts Hole Adapter

Tento RAM Mounts GDS Tough-Dock držiak s kľúčovým zámkom je určený pre Samsung Tab A9+ v IntelliSkin Next Gen ochrannom obale. Držiak nabíja tablet cez USB-C konektor a poskytuje USB-A port pre pripojenie periférií. Spodná časť držiaka je prispôsobená na pripevnenie na guľovú základňu.

• Bezpečné pripevnenie tabletu pomocou kľúčového zámku
• Nabíjanie tabletu cez USB-C konektor s výkonom 15W
• Podpora periférnych zariadení cez USB-A port
• Jednoduchá inštalácia a vyberanie tabletu

Objav podobné ako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

RAM Mounts GDS Uni-Conn je pružinová dokovacia stanica navrhnutá pre zariadenia v IntelliSkin prípadoch s Uni-Conn adaptérom. Zabezpečuje bezpečné uchytenie a rýchle nabíjanie cez pogo piny s USB-C pripojením. Obsahuje aj USB-A port pre periférne zariadenia.

• Univerzálna dokovacia stanica s pružinovým mechanizmom pre rýchle a bezpečné uchytenie.
• Podpora rýchleho nabíjania cez integrované pogo piny s USB-C vstupom a výkonom 15W.
• Dodatočný USB-A port pre pripojenie periférneho zariadenia (napr. myš alebo klávesnica).
• Jednoduchá inštalácia a kompatibilita s IntelliSkin prípadmi a Uni-Conn adaptérom.

Objav podobné ako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

RAM Mounts Universal Vehicle Mount je univerzálny držiak určený pre montáž do vozidiel. Skladá sa z vozidlovej základne, dvojitého otočného ramena a využíva štandardné AMPS pripojenie. Umožňuje bezpečné a prispôsobiteľné umiestnenie rôznych elektronických zariadení počas jazdy.

• Univerzálna kompatibilita s rôznymi zariadeniami
• Dvojité otočné rameno pre maximálnu prispôsobiteľnosť
• Odolná konštrukcia z kvalitných materiálov
• Jednoduchá inštalácia a nastavenie

Objav podobné ako RAM Mounts Universal Vehicle Mount

Dokovacia stanica RAM Mounts Form-Fit je navrhnutá špecificky pre tablet Getac ZX10. Poskytuje napájanie a dátové pripojenie cez duálne USB-A porty. Ponúka flexibilné montážne možnosti vďaka kompatibilite s AMPS a VESA štandardmi.

• Poskytuje spoľahlivé napájanie a dátové pripojenie cez duálne USB-A porty
• Univerzálne uchytenie kompatibilné s 4-dierovým AMPS a VESA štandardom
• Špeciálne navrhnutá pre dokonalé prispôsobenie tabletu Getac ZX10
• Robustná konštrukcia vhodná pre profesionálne a náročné prostredia

Objav podobné ako RAM Mounts Form-Fit Docking Station

RAM Mounts Charging Dock je nabíjacia stanica navrhnutá pre tablety Honeywell RT10. Ponúka dvojité USB-A výstupy a 5.5 mm jack vstup na napájanie. Je kompatibilná s VESA 75x75 upevnením pre flexibilnú inštaláciu.

• Dvojité USB-A porty pre súčasné nabíjanie viacerých zariadení
• Kompatibilita s VESA 75x75 štandardom pre jednoduchú inštaláciu
• Špecificky navrhnutá pre robustné tablety Honeywell RT10
• 5.5 mm jack vstup pre spoľahlivé napájanie

Objav podobné ako RAM Mounts Charging Dock

RAM Mounts nabíjacia stanica je určená pre ručné terminály Honeywell CT40, CT45 a CT47. Ponúka uzamykateľnú konštrukciu, vstup 5.5 mm jack a USB-A výstup. Upevňuje sa pomocou štandardného 2-otvorového AMPS systému.

• Uzamykateľná konštrukcia pre bezpečné nabíjanie
• Univerzálna kompatibilita s radom Honeywell CT40/45/47
• Jednoduchá inštalácia pomocou 2-otvorového AMPS upevnenia
• Praktický USB-A výstup pre flexibilné napájanie

Objav podobné ako RAM Mounts Charging Station

RAM Mounts adaptér s AMPS vzorom dier Adaptér RAM Mounts je vyrobený z povlakovanej zliatiny hliníka a je vybavený 1" gumovým čapom veľkosti "B". Výhodný a univerzálny Adaptér je kompatibilný so systémom ramien a úchytov RAM mount. Zodpovedá štandardu AMPS a poskytuje doživotnú záruku RAM mount. Použitie adaptéra Adaptér slúži ako úchyt na rovné povrchy s 1" čapom. Je určený pre pevné nerozoberateľné pripevnenie držiaka na rovnú plochu. Pripevnenie na palubnú dosku nákladného auta Pripevnenie na palubu lode Pripevnenie na board kajaku Adaptér tiež slúži ako prepojenie držiakov RAM s ramenami pre 1" čapy, najmä pre ťažšie univerzálne držiaky pre veľké tablety. Technické informácie Adaptér má priemer 6,35 cm a je vybavený 7 predvŕtanými dierami, z ktorých 4 zodpovedajú priemyselnému vzoru dier AMPS. Jeho hmotnosť je 68 g. Kovový verzus plastový diel RAM mount garantuje pre plastové aj kovové diely rovnaké pevnostné parametre. Sú plne zameniteľné. Výhodou plastových dielov je nižšia hmotnosť a cena, zatiaľ čo kovové diely ponúkajú prémiový vzhľad.

Objav podobné ako RAM Mounts adaptér, kovový, AMPS vzor dier, čap 1"

This GDS Uni-Conn adapter is designed for selected IntelliSkin protective sleeves to make them compatible with the Uni-Conn system. The octagon-shaped adapter is easy to install before inserting the device into the protective sleeve. When it's time to upgrade your device fleet, simply replacing the IntelliSkin protective sleeve is all that’s needed. With its high compatibility, this adapter provides a reliable solution for seamless device integration into the Uni-Conn system. Product features RAM Mounts RAM-GDS-U1U-GRY: Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case series Easy insertion and removal Screw Set included Additional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as: Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+. For these device models, the adjustable adapter RAM-GDS-U1AU is recommended. Devices shown are not included in the delivery. Only the RAM-GDS-U1U-GRY adapter is supplied.

Objav podobné ako RAM Mounts GDS Uni-Conn Adapter for IntelliSkin Protective Sleeves - Screw Set - Grey

The GDS Hand-Stand with Uni-Conn Adapter is a high-quality accessory for the Uni-Conn system that significantly improves tablet usability on flat surfaces.Designed for professional use in mobile environments, the Hand-Stand allows for stable positioning of the device, ensuring convenient and ergonomic operation.The Uni-Conn adapter is installed before inserting the tablet into the IntelliSkin protective sleeve.The result is a reliable and secure stand without compromising the mobility or protection of the device.Product features RAM Mounts RAM-GDS-U1HSKU:Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case seriesIncl. Uni-Conn AdapterEasy installationAdditional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as:Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+.Devices shown are not included in the delivery.Only the RAM-GDS-U1HSKU adapter is supplied.

Objav podobné ako RAM Mounts GDS Hand-Stand with Uni-Conn Adapter for IntelliSkin Next Gen Cases - Hard- and Thin-Case Series - Screw-Set - Gray

The GDS Hand-Stand with Uni-Conn Adapter is a high-quality accessory for the Uni-Conn system that significantly improves tablet usability on flat surfaces.Designed for professional use in mobile environments, the Hand-Stand allows for stable positioning of the device, ensuring convenient and ergonomic operation.The Uni-Conn adapter is installed before inserting the tablet into the IntelliSkin protective sleeve.The result is a reliable and secure stand without compromising the mobility or protection of the device.Product features RAM Mounts RAM-GDS-U1HSKU:Compatible with IntelliSkin Next Gen, Hard Case, and Thin-Case seriesIncl. Uni-Conn AdapterEasy installationAdditional information: Please note that this adapter is not compatible with certain devices in IntelliSkin, such as:Apple iPad Pro 11" (1st - 4th Gen.), iPad Air 4, Air 5, Air 11 (M2), iPad 10th Gen., iPad Pro 12.9 (3rd - 6th Gen.), iPad mini 6 & A17 Pro, Samsung Tab A 10.1, Tab A 10.5, Tab A 8.0 (2018), Tab A7 10.4, Tab Active Pro, Tab Active4 Pro, Tab S7, Tab S7+, Tab S7 FE, Tab S8+.Devices shown are not included in the delivery.Only the RAM-GDS-U1HSKU adapter is supplied.

Objav podobné ako RAM Mounts GDS Hand-Stand with Uni-Conn Adapter for IntelliSkin Next Gen Cases - Hard- and Thin-Case Series - Screw-Set - Gray

RAM Mounts Double Ball Adapter - C-Ball (1.5 inches), in a poly bag

Objav podobné ako RAM Mounts Double Ball Adapter

RAM Mounts Double Ball Adapter - B-Ball (1 inch), approx. 64 mm long

Objav podobné ako RAM Mounts Double Ball Adapter

RAM Mounts Pod I Seat Rail Adapter with AMPS Connection - Flexible Rod (Approx. 450mm), Round Base Plate, B-Ball (1 Inch), in Poly Bag

Objav podobné ako RAM Mounts Pod I Seat Rail Adapter with AMPS Connection

RAM Mounts Adapter Plate for Monitors & Keyboards - approx. 278 mm long, VESA & AMPS hole grid

Objav podobné ako RAM Mounts Adapter Plate

RAM Mounts Adapter Plate for Monitors & Keyboards - approx. 309 mm long, VESA & AMPS hole grid

Objav podobné ako RAM Mounts Adapter Plate

Držiak na mobil – na motorku, mechanický, pre mobily so šírkou 4,8 – 8,3 cm Potrebujete na motorku pripevniť svoj telefón? Hodiť sa vám tak rozhodne bude držiak na mobil RAM Mounts. Stojan na mobil je pripravený na mechanické upevnenie telefónu. Dáte do neho telefón so šírkou od 4,8 do 8,3 cm. Držiak mobilu na motorku vám dobre poslúži na cestách. Hlavné prednosti držiaka na mobil RAM Mounts kompletná zostava univerzálneho držiaka X-Grip na riadidlá do priemeru 60 mm Vďaka držiaku na mobil RAM Mounts budete mať telefón stále na očiach Je určený pre mobilný telefón so šírkou od 4,8 do 8,3 cm Telefón nasadíte na držiak ručne Držiak telefónu RAM Mounts je pripravený na motorku

Objav podobné ako RAM Mounts kompletná zostava univerzálneho držiaka X-Grip na riadidlá do priemeru 60 mm (M021-007)

Držiak na mobil – na motorku, mechanický, pre mobily so šírkou 4,8 – 8,3 cm Potrebujete na motorku pripevniť telefón? Vhodným riešením pre vás môže byť držiak na mobil RAM Mounts. Stojan na mobil je z výroby pripravený na mechanické upevnenie telefónu. Vložíte do neho telefón so šírkou od 4,8 až do 8,3 cm. Držiak mobilu na motorku vám spríjemní cestovanie. Hlavné vlastnosti držiaka na mobil RAM Mounts kompletná zostava držiaku X-Grip s uchytením do krku riadenia motocykla Vďaka držiaku na mobil RAM Mounts budete mať telefón stále poruke Je určený pre mobilný telefón so šírkou od 4,8 do 8,3 cm Telefón umiestnite do držiaka ručne Držiak telefónu RAM Mounts je pripravený na motorku

Objav podobné ako RAM Mounts kompletná zostava držiaku X-Grip s uchytením do krku riadenia motocykla (M021-073)

Držiak na mobil – na motorku, mechanický, pre mobily so šírkou 4,8 – 8,3 cm Chcete na motorku pripevniť telefón? Osloviť vás môže držiak na mobil RAM Mounts. Stojan na mobil má z výroby nachystané mechanické upevnenie telefónu. Prichytíte do neho telefón so šírkou od 4,8 až do 8,3 cm. Držiak mobilu na motorku oceníte pri cestovaní. Zásadné vlastnosti držiaka na mobil RAM Mounts kompletná zastava držiaku mobilného telefonu „X-Grip" s uchytením na 9 mm skurtku Pomocou držiaka na mobil RAM Mounts budete mať telefón stále poruke Hodí sa pre mobilný telefón so šírkou od 4,8 do 8,3 cm Telefón prichytíte k držiaku mechanicky Držiak telefónu RAM Mounts je nachystaný na motorku

Objav podobné ako RAM Mounts kompletná zastava držiaku mobilného telefonu „X-Grip s uchytením na 9 mm skurtku (M021-058)

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (key-locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub-Anschluss

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: RoHS, ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11U: Compatible with OEM hand strap Easy insertion and removal With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11U holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-CAU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts EZ-Roll’r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM60CPN-1AU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Input Connector: USB-C Output Connector: USB-A 1.1 (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support ... Unknown localization key: "more"

Objav podobné ako RAM Mounts EZ-Roll'r Modular Holder for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts EZ-Roll’r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM60CPN-CAU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product ... Unknown localization key: "more"

Objav podobné ako RAM Mounts EZ-Roll'r Modular Holder for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts Modular Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C and USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLN-CAU: Compatible with accessories and side accessory attachments Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLN-CU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Output Connector: USB-C (Peripheral output - 500mAh) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Power & Data Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. The included RAM NFC extender supports the NFC function with a range of up to 30 cm. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, GDS Roto-Mag and side accessory attachments. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKL-NFCU: Compatible with accessories Including RAM NFC-Extender Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Potential interference of NFC functionality may occur when positioned close ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form- Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Modular Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLNU: Compatible with accessories and side accessory attachments Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLNU holder is supplied.

Objav podobné ako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLT-AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral & data support is provided by the built-in dual USB-A & RJ45 (ethernet) cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLT-RJ45AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Output Connector: USB-A & RJ45 (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & Dual USB-A & RJ45(Ethernet) Conne

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLTU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLTU holder is supplied.

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-1AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible ... Unknown localization key: "more"

Objav podobné ako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

RAM Mounts rameno pre 1,5" guľové čapy EAN: 793442001215 Prehľad RAM Mounts rameno s celkovou dĺžkou 143 mm je navrhnuté pre 1,5" guľové čapy. Pružina a uťahovacia skrutka na ramene umožňujú rýchle a pevné pripevnenie. Špecifikácia Rozmery: celková dĺžka 14,3 cm, dĺžka medzi svorkami 11,4 cm Materiál: povlakovaná zliatina hliníka Váha: 322 g Veľkosť guľového čapu: 1,5", gumový, veľkosti "C" Rady a nosnosti RAM vyrába svoj systém úchytov a ramien v niekoľkých radoch, odstupňovaných podľa nosnosti. Diely v rade "C" sú určené pre zariadenia do hmotnosti 4,5 kg. O systéme držiakov RAM mount Systém RAM poskytuje jedinečnú variabilitu vďaka patentovanému systému guľových čapov a ramien so svorkami. Užívateľ si tak môže zostaviť držiak pre svoje zariadenie podľa svojej potreby. Kovový vs. plastový diel Výhodou dielov z vysokopevnostného plastu je nižšia hmotnosť a cena, zatiaľ čo diely z povlakovanej zliatiny hliníka ponúkajú prémiový vzhľad. RAM mount garantuje pre oba typy dielov rovnaké pevnostné parametre a poskytuje na ne rovnakú doživotnú záruku. O RAM mount Produkty RAM mount sú navrhnuté tak, aby bezpečne uchytili elektronické prístroje tam, kde ich ľudia potrebujú. Výrobca kladie dôraz na vysokú kvalitu a spoľahlivosť.

Objav podobné ako RAM Mounts rameno pre 1,5" guľové čapy (celková dĺžka: 143 mm),

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad mini (A17 Pro & mini 6) with rear pogo pads - designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP36-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP36-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad mini 6 & mini (A17 Pro) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad mini (A17 Pro & mini 6) - designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible - including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP36-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP36-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad mini 6 & mini (A17 Pro) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 12.9 (3.-5. Gen.) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP37-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP37-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 12.9 (3.-5. Gen.) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 12.9 (3.-5. Gen.) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP37-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP37-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 12.9 (3.-5. Gen.) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad 10 & 11 Gen. (A16) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP40-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP40-TCB is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad 10 & 11 Gen. (A16) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad 10 & 11 Gen. (A16) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP40-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP40-TCD is supplied.

Objav podobné ako RAM Mounts IntellìSkin Thin Case for Apple iPad 10 & 11 Gen. (A16) - GDS-Technology - External USB-C Connector